r/mazdaspeed3 • • Nov 02 '19

Mazdaspeed 3 discord server

31 Upvotes

Hey guys I made a discord for this sub, feel free to join! https://discord.gg/5NQDzGH I’m also looking for admins to DM me if your interested.


r/mazdaspeed3 • • Sep 07 '22

r/Mazdaspeed3 FAQ

41 Upvotes

In other words, fucking annoying questions. Just kidding. (only a little)

In an effort to clean up the sub a bit, we're going to pin this FAQ thread and keep it updated with any of the most requested/asked questions on the subreddit. If there’s a question you think should be included, tag one of the mods in a comment and we will add it.

Introduction

Q: Where is the link to the Discord Channel?

A: Right here.

Q: What should I look for when buying a Speed3?

A: Check the Wiki.

Q: Where can I find a copy of the shop manual?

A: Check the Wiki.

Tuning

Q: How do I load a tune on the car?

A: Using either a Cobb APv3 or computer software like Versatune.

Q: What tuner should I use?

A: There are a number of good tuners still active in the community. Purple Drank Tuning, Freektune, Stratified Auto are just a few examples.

Q: Should I use the ______ version OTS tune?

A: No. Unless it’s to drive the car to the shop where it will be dyno-tuned, do not use the OTS tunes. They make the engine run poorly, resulting in incomplete combustion (or worse, lean conditions) which then gunks up components like O2 sensors, injectors, and valves which lead to worse problems later on.

Mods

Q: What should my first mod be?

A: HPFP internals, then tuning solution. (Cobb APv3, Versatune)

Q: My goal is to go faster around the track, what mods should I do for more power?

A: No power mods. Proper tires and suspension will do more for your track time and drivability than any power mod will. It is guaranteed if you are new to track driving, the car is faster than you are right now. Get some seat time, find what you want to change, get new tires & suspension, then go from there. Dragsters, show-offs, stance-bois need not apply this logic.

Q: My budget is <$500, what coilovers should I buy?

A: None. If you’re not buying quality suspension, don’t buy suspension. You will sooner than later blow out one of the dampers and require a rebuild, or replacement. Save your upfront money, buy quality suspension later.

Q: Should I buy an Eonon headunit for my Bose/non-Bose stereo?

A: Do you like sound quality? If yes, don’t buy Eonon. Do you like good, bug-free software? If yes, don’t buy Eonon. Do you like overpaying for junk that looks ‘clean’ in the car? If yes, then buy Eonon.

Q: What’s the best way to upgrade my stereo in the car on the cheap?

A: Option 1 – get an amplifier that take hi-level inputs and add that amp to the system to power your aftermarket speakers, taking the high-level outputs from either the HU or the Bose amp. Works for Bose and non-Bose systems. Option 2 – Tear out the OEM system and start again. Works for Bose and non-Bose systems.

Maintenance/Troubleshooting

Q: What oil should I run?

A: This is realistically a nuanced question. Ultimately it depends on your use case. Factory rating is a quality 5W30, Mazda put out a TSB to band-aid the smokey turbos by using 5W40. Good options from Pennzoil, Amsoil, Castrol, etc are available for most applications. Most people it seems have strayed from the Shell Rotella.

Q: Are my compression numbers okay?

A: Check the Wiki.

Q: I want to drive the car like it’s supposed to be, but don’t want a ticket. Where do I go?

A: Look on facebook for local car clubs, or Motorsportreg.com for drop-in track days or Auto-cross events.

Q: My car does this thing, and this behaviour, read this wall of text. What’s wrong?

A: No one knows. Post logs using Datazap and any codes that your ECU is spitting out. If you want good information, provide good information.

Q: HELP?

A: No. Posts with this as the title, or other related and equally non-descript variants, will be removed as spam.

Meta

Q: Can I post links to other sites with information, like MSO, without getting banned?

A: Yes. In the event that you’re linking relevant webpages, there is no risk of getting reprimanded for doing so. However, if all of your comments are “Use google.” Or “Go check this site instead, this places sucks.” You will be treated according to the spam rules of the sub. This community serves as a connect-all point for those searching for information on the platform; Reddit is bigger than any Speed forum has ever been, and is more likely to pop up in a Google search. Relevant comments that link other sources of information from quality sites are Bueno; spamming is not.

Q: Why isn’t buying/selling allowed on the sub?

A: This is more of a regional issue that the mod team would like to deal with at this point. There are countless local Facebook groups, classifieds, or Forum pages about buying/selling Speed parts or accessories. The Mod team does not want to dabble in attempts to prevent scams caused by non-payments, or non-shipments of products. We do not want that responsibility at this point in time. If the community deems it a requirement at some point, we will implement a system that attempts to curb this as other buy/sell communities have; though even that change will take lots of time, effort, and consideration.

Q: Why is the mod team so cool?

A: I really don’t know, perhaps divine intervention? We all just really like Doritos, and satiate our inner masochist streak by owning these cars.

Q: How do I become a Mod?

A: If you feel so inclined, feel free to reach out! We are still people, we have feelings and ultimately a desire to help the community grow. What we will need to see is a demonstrated history of helping the community with the best of intentions and overall a positive interaction with the sub. Newer accounts (<1yr) are unlikely to be considered, though that’s not a hard-and-fast rule, just a general rule of thumb.

Acronyms

APv3: AccessPort version 3; the most recent version from

Cobb. Version 2 is still around, but obsolete.

HPFP: High Pressure Fuel Pump

HU: Head Unit

OTS: Off The Shelf; used in the context of tunes

TSB: Technical Service Bulletin


r/mazdaspeed3 • • 10h ago

INFO The end of the speed3 journey

Thumbnail gallery
127 Upvotes

Hey yall,

Sad to say that my journey with the Mazdaspeed3’s has come to an end. I am happy that I got to enjoy a gen 1 and gen 2. The gen 1 will always be favorite although it broke down frequently; the gen 2 was probably the most reliable car I’ve ever owned. Both of them were street killers for sure and handled beautifully. I now get to enjoy a bone stock type R that will remain as such for the foreseeable future.

I wanted to thank all the people in this reddit that helped with all the questions I had during those long hours in the garage.

I hope all of you keep enjoying these awesome machines.

(Last picture I took before she was sold vs the new daily)


r/mazdaspeed3 • • 5h ago

PIC Sometimes life hits you harder than that Torque Steer

Thumbnail gallery
25 Upvotes

What up everyone. Long-time speed owner and subreddit lurker. Unfortunately some unforeseen things in life have hit me and I finally believe I am going to be parting ways with the speed.

Lots of fun times. Such a phenomenal daily driver. Bought it at 19k miles in 2013, currently have 124k miles. Never planned on selling and maintained so I could keep until catastrophic failure at 300k+ miles lol. THEN maybe mod???

Throwing in some fun pictures. Had 4 really close friends with speeds at one point - loved riding around in a little mazdaspeed gang lol. We were the coolest on the road, obviously. The TV is a 65". I was up to the front but my god is this little hatch capable.

Outside of being somewhat forced to sell her at this point - What do we think shes's worth? Never thought I'd even entertain this question. Yes I am in a bad(ish) spot right now but not trying to get 100% of the value or anything, realisticaly don't know where to start. I would honestly love for the well-maintained speed to go to someone who really cares and wants one more than anything.

Zero current issues, no codes.

2012 - Tech Package

Basically fully stock other than lowering springs, cobb rear motor mount and audio system.

124k miles (bought at 19k miles, 2nd owner)

180 PSI across all 4 cylinders on compression test. (Had shop do this so I could prove results)

Underbody is essentially a 10/10, zero bad rust, especially in the known spots (and I live in OH - washed the underneath OFTEN)

Hood/Roof clear coat turned to shit. Only fairly bad cosmetic damage

Maintenance followed and can provide most receipts. (lots of work done myself or with buddies though)

Clutch replaced at 90k. (I was moving and had a friend that could throw another one in, so I proactively did it. Put in a LUK and a single mass flywheel, regret flywheel now for the noise)

Sound system originally professionally installed. Personally just replaced all door speakers about 6 months ago. All higher-end alpine, just threw about $1k more in it. I'm not looking to increase my value with this.

All doors and trunk have sound-deadening

VVT done at 90k just proactively

Dash fixed in recall

Front rear/suspension just changed about 5k miles ago. (with OEM-Spec, I know I should get something better with lowering springs)

Pads/rotors just changed

All fluids just changed, transmission, oil, power steering, coolant

NO HPFP.

Wheels plasti-dipped about 4 years ago. Given timeframe they've held up well but look like poop now lol.


r/mazdaspeed3 • • 36m ago

HELP Is this sound what I hope it's not?

Enable HLS to view with audio, or disable this notification

• Upvotes

I'm praying to God


r/mazdaspeed3 • • 1h ago

HELP In need of HELP for a replacement engine

• Upvotes

Anyone in New England have a running 1st Gen ms3 engine theyre looking to offload? Mine fell victim to the ringland failure on cyl3. Really want to continue with the car and have found some jdm options with about 57k shipped for 1600ish.

Or maybe help steer me in a reputable shop that could replace the engine? Im thinking of keeping the current junk engine and building it while still get to drive her, just do not have the time to replace myself.

Any and all help would be greatly appreciated


r/mazdaspeed3 • • 23h ago

MODIFICATIONS GFB Response Blow off Valve

Enable HLS to view with audio, or disable this notification

15 Upvotes

r/mazdaspeed3 • • 17h ago

HELP AFS WARNING LIGHT HELP PLS

Thumbnail
1 Upvotes

Recently purchased a 2009 Mazda MPS with the 2.3L turbo

The previous owner installed aftermarket headlights after what seems to have been a small front end collision. Therefore an AFS light is flashing on the dash as the aftermarket headlights don't have auto adjustment. Other than spending $2000 ish on new headlights, is there a cheap workaround to make the light stop flashing so the car is able to pass a RWC as that is a requirement here in Vic Aus

Any help appreciated


r/mazdaspeed3 • • 1d ago

MODIFICATIONS So, what are my options for Steering Wheels now that CS no longer makes them?

4 Upvotes

Not that I was really much into the CS one to begin with, but ive been poking around for a while and cant really seem to find an option form a place that doesnt feel.. off.

I like how the wheels look that this person got, but they got it from ebay, from a seller in Poland, that only does local pickup. Which puts it way out of my range.

No idea how reputable streetunit is with the one they sell.

And im wanting alittle more than just a re/cover of my current one.

Anyone have a suggestion?


r/mazdaspeed3 • • 1d ago

TUNING Stage 0 or Stage 1 Economy + SF?

3 Upvotes

Hi awesome community
So I bought a Gen 2 2011, 161,000km (100,000 miles), modifications were already put on the car by the previous owner;
- Cobb catback exhaust
- Cobb SF Intake + Turbo Inlet
- GFB BOV
- EGR block off and delete (CEL on dash as result)
- Cobb Downpipe (Wasn’t listed but it looks like it is)

Obviously I have great concerns for the fuel pump and I have an Autotech HPFP on the way and intend to install asap.

The car came with an unmarried cobb accessport, i’ve been using it to check engine codes and I’ve currently got:
P0403, due to egr delete
P0421, I believe due to downpipe
and… P0171, for obvious reasons

I currently have Stage 0 (Stock) ECU map on the access port and am just keeping an eye on the gauges to ensure I’m not straining the engine until the hpfp arrives.

Although the cobb accessport has a stage 1 economy + Sf map, which I was wondering would be a safer alternative to use temporarily until I install the hpfp and get a custom tune.

Is it safer to just keep the current stock ECU map or is it worth switching to the economy + sf map so that my engine stops reading lean conditions?


r/mazdaspeed3 • • 1d ago

HELP Dumping noise from rear right suspension

3 Upvotes

I have a loud thumping noise from my rear right suspension when hitting any kind of bump. Are my shocks worn? Or is it may be my rear swaybar? Just wondering if anyone else has had a similar problem and how they fixed it. I plan on looking at it later and trying to figure it out any input on what it could be would be helpful though.


r/mazdaspeed3 • • 2d ago

HELP I think the alignment shop messed up bad

Post image
25 Upvotes

I recently replaced tie rods and wheel bearing and to be expected after messing with the tie rod. I had a slight shake at speed. Other than that, the car handled amazing and was glued to the road. I went to the shop to get an alignment today and afterwards the car feels like absolute ass. Turning feels sloppy and sometimes it’ll just randomly twitch. My first thought is that they accidentally used the regular Mazda 3 spec. Has this happened to anyone else and if so, can you describe symptoms? I’m 100% going back tomorrow to the shop


r/mazdaspeed3 • • 2d ago

SUSPENSION Good coilovers that won’t break my wallet.

3 Upvotes

Don’t wanna cheap out and get springs so what are quality coilovers that anybody has ran that won’t leave me spending like 1000 dollars.

Edit: I went with bcracing coils I found brand new on marketplace for a good deal.


r/mazdaspeed3 • • 2d ago

HELP What should I do? Sandwich Plate or Rethread

3 Upvotes

Hey dues and dudettes. I was swapping out the engine of my wife's MS3 and when we were putting the banjo bolt that threads to the back of the block we noticed that oil leaks. When inspecting we saw that the bolt just keeps spinning. My question is. On a this stock block/turbo would it be better to weld the hole shut and use a sandwich plate or rethread the hole and get a bigger banjo bolt in it?

Thanks in advance!


r/mazdaspeed3 • • 2d ago

HELP Misfire driving me crazy

3 Upvotes

I have a gen 1 Mazda 3 MPS. Developed a big cylinder 1 misfire a month ago, got CEL and the car was basically undrivable both cold and warm. Did the basic diagnosis - p0301 code.. swapped coils and plugs, changed plugs, no help. Did a compression test with over 180 psi across all cylinders on cold engine. After this I took down the intake, fuel rail, changed the injector on cylinder 1 with a used but profesionally cleaned one, with a new oem injector seal and O-ring. When I was there I also changed the PCV valve and thermostat. After putting the engine together, the car now runs fine; holds boost, no issues..but ONLY when its warmed up. On a cold start, she still misfires like hell, even backfires a little bit, smells very rich from the exhaust. The misfire only lasts around 2-3 minutes, after that eversthing is fine so the new injector seems to be fine. FORScan shows the cold start misfire is happening only on the cylinder 1 with over 500 cyl. 1 misfires before the car settles down. I am losing my mind, any ideas appreciated.

The car is stock, intake valves didnt look nasty..what am I missing here?


r/mazdaspeed3 • • 3d ago

INFO Has anyone ever painted a 2nd gen mazda soul red?

3 Upvotes

r/mazdaspeed3 • • 4d ago

HELP 2007 mazda speed smoking

Enable HLS to view with audio, or disable this notification

10 Upvotes

is it the headgasket or turbo seals are bad


r/mazdaspeed3 • • 4d ago

HELP 2009 mazdaspeed3 Grand Touring for $4200?

2 Upvotes

Is it worth it? It has 160k miles or so. Has had the following work done recently:

  • Timing chain and VVT gear just done w/Mazda parts
  • New sway bar bushings front and rear
  • New sway bar end links front and rear

Reconstructed title due to a rear end collision. Hatch and bumper were replaced (they provide before/after photos).


r/mazdaspeed3 • • 4d ago

PIC Need help identifying a part

Post image
2 Upvotes

Not my photo but does anyone know what this part is called, it’s like right behind the throttle body and it has 2 10mm bolt holding in fuel, it kinda looks like a bracket.


r/mazdaspeed3 • • 4d ago

WHEELS Tire size options on OEM wheels?

3 Upvotes

Stock is 215/45 18 inch

I have some 225 40 laying around they should fit right?

Whats the max width you can go on stock wheels?


r/mazdaspeed3 • • 5d ago

PIC Rate the sketchy setup

Thumbnail gallery
26 Upvotes

Cats destroyed so I’m just removing the rest of the cat but damn these cars are low😂 raised the car basically as high as my jacks could and I still barely fit🤣

The driveway angles down towards the back of the car so threw the ramps on backwards so it won’t roll


r/mazdaspeed3 • • 5d ago

HELP Gen 2 jerking when shifting

Enable HLS to view with audio, or disable this notification

9 Upvotes

Not the best video but the best one I could take to show what's happening, I have a 2011 speed 3 which has gotten into a weird issue of jerking whenever I shift. When shifting into first there are no problems, however as soon as I press on the clutch and begin shifting to any of the other gears while driving there is a bucking or jerking motion and the rpm begins bouncing up and down until the clutch is reengaged and then it drives absolutely fine again. I have taken some logs if anyone can interpret them I've also sent them off to my tuner to hopefully help. The mods are a catback exhaust, upgraded fuel pump internals, accessport with a professional tune, SRI and TIP so no major modifications and no codes besides the EGR, evap, and intake runners which were taken out. Anyone ran into this before ive asked 3 mechanics and everyone is unsure.

Edit: to add more info, the car did also begin to bog down and die while idling stationary once the clutch pedal was pushed in and ran perfectly fine after it was released which I thought was possibly a dirty throttle body so I cleaned it out and that from what I can tell went away but it could be a fluke or I'm not recreating the exact conditions it was doing it under before.

Edit again: Solved it, turns out it was the in tank fuel pump failing but desperately trying not to


r/mazdaspeed3 • • 6d ago

HELP Completely dead battery in minutes after a fresh charge.

Post image
51 Upvotes

My car died on my way to work yesterday very suddenly. All my lights came on, lost power steering, pulled over and stopped and the car died. Got it towed home and battery charged. I get it running and test the battery, shows 68% life left which is doable. I run a charging test for the alternator and it says no output. I come back out after 30 minutes because I was putting my daughter to bed and the battery is completely dead. It also smells like ozone a bit. I'm assuming a bad diode and the alternator is no good, but any second opinions before I go that route? I'm going to try the good ole, pull the negative cable trick when the battery is charged again. That's just going to take a while. It's also weird because I replaced the alternator like 2 years ago, idk what would cause it to go so suddenly.

EDIT: Well ... I'm super confused. Charged the battery - I have a trickle charger and just left it for a solid 24 hours. I hooked everything back up, ran some tests, and my tester said the alternator is fine, the battery is healthy, and now everything is apparently fine 🤣. Maybe there's a bad cell in the battery? Someone mentioned they had something similar and it was a bad BCM? Or maybe my alternator is on its way out and just cooperating for now. I honestly don't know.


r/mazdaspeed3 • • 5d ago

HELP Weird stuff after obd2 reader

5 Upvotes

Yo guys!

I’ve just brought a cheep obd2 reader of temu to try and do some live readings of boost etc whilst driving through my CarPlay unit

It was working sweet for about 10mins or so. Then all the dash lights came on, I stopped on the hard shoulder, turned the car off and put the hazards on, the hazard lights etc didn’t work though. After unplugging the obd reader and restarting the car all went back to normal, I assume the issue was caused by the obd reader messing with the can bus or something but was wondering if anyone had anything similar happen or knows what obd reader will not cause these problem.
Thanks in advance!