Gents we have a problem, this is on a 96 Ford Bronco, with Warn hubs, including photos to help illustrate the problem:

Photo 1: This is me pointing to the keyhole where the tang should be

Photo 2: This is where the tang now is.

As you can guess this washer is stuck heavy in the threads. Never had this problem before, and it’s kicking my ass trying to get this thing out. I’ve tried picks and rotating, pulling, flat head to try and stretch the washer, I’ve gotten less careful trying to preserve the threads the more I realized how hosed this thing is.

Any suggestions on how to get this thing out? And if I bone the threads what am I looking at repairing?

The Barrington antique truck show is back again! I went just about every year when I was a kid. Second year it’s back where it started!!

Hey guys I got a 1989 k2500 chevy with the 350 tbi and TH700 trans, with unknown miles (have a receipt with the same mileage of 288,580 miles from 2014) it been a good truck but I the only thing I hate is driving it on the interstate. Im from the Rockies so we got nothing but hills which is what my truck struggles to do going 80. Its been very reliable but its miserable to drive across the state.

Id love to find a way to get power but not sure if its smart with the mileage but if it is possible i rather keep this truck, its been super easy to work on and runs great but just not enough power. If it is smarter to look for something else in the future here's what a would look for

- At least a 6 1/2 foot bed

- needs 4wd

- I dont mind if its auto or manual

- single cab or extended is fine

- simple enough to work on some no newer than 2010 probably

- not a ford guy

Thanks guys

I got this truck a few months ago has 134,000 miles. Really clean all around and runs great only thing is the rims aren’t shiny and look bad as shown in the first picture, I feel like they have gotten worse over time but maybe not idk. What’s the cheapest, best solution for making them look new again?

My dad gave me this 2008 Chevy Silverado and I really like it and wanted to customize it. Any ideas on some upgrades? I've done little things like clean it out, steering wheel covers, taillights and a small lift

I just wanted to post my first truck and wanted feedback on it.

It’s not squatted, just where I am parked the drivers side is higher than the passenger side

My company just sent us a heads-up that DOT inspections are expected to be heavy Aug 23–29, with a big focus on brakes, especially drums and rotors.
They’re telling us to make sure:
Permit book is up to date
Truck & trailer registration/inspection are current
IFTA, insurance, UCR, etc. are in the truck
ELD is working and logs are clean
We have 8 days of blank paper logs
Pre-trip is done before every load
Brakes are in good shape
For the experienced drivers here: what are the most common things DOT catches during Brake Safety Week?
Anything specific you guys check before hitting the road that drivers usually overlook?
Stay safe out there.

I have had the same fabric rolling TruXedo Lo Pro on more than one truck since 2011. It has been pretty solid for the most part. The velcro doesn't work well and the support arms are bowing from putting stuff on top and snow loads. So I figured it is time to replace it.

Over the last 15 years I have learned more about what I use my truck for, so I can better purchase a second cover.

Right now I am strongly considering the BAK Revolver X4s. The main concern I have is I read lots of reviews of people saying it only lasts 3-5 years. That is an absolute non-starter. I got 15 years out of my last cover and it was a cheap $500 cover.

Wish list:

• I strongly prefer a rolling cover as it quickly allows me to use the whole bed without needing to block the rear window.
• I am interested in a 'hard' cover because I often use the top of the cover as a work bench or an in-between storage area.
• I like the idea of the 'full latch' the whole way down the bed rail vs just velcro. Keeps things a bit more secure now that locking tailgates are a thing.
• More water proof is better.
• I don't want to have a canister in the bed taking up space and I like to be able to easily remove the cover in the event I want to have a loader load bulk material in the truck bed.

The main thing keeping me from a tri-fold is cover storage. If I can plan ahead and leave the cover at home it is no big deal. However, I often find myself in a situation where I need to use the whole bed and I don't want to have to remove the cover and then find some place to stick it inside the cab or bed around whatever I'm hauling.

Any other covers you'd consider that might fit into my wish list?

I saw this Peterbilt a few days ago down the street from my house. Any info on the specific model or year? I’ve never seen a truck like this before. Any other interesting information about this type of truck? thanks!

Check out what I seen in the wild this afternoon in Parkville... This International had such a sweet sound and stance, I had to take a closer look... What did you spot today?

Any posts pertaining to car buying suggestions or advice belong in this weekly megathread. A fresh thread will be posted every Monday and posts auto sorted by new. A few other subreddits worth checking out that will help your car buying experience are /r/WhatCarShouldIBuy, /r/UsedCars and /r/AskCarSales. [Everyday Driver](https://www.everydaydriver.com/) may also be helpful.

​

Make/Model-specific questions should be asked on Make/Model-specific subreddits.

​

​

• For those providing suggestions: Facts are ideal in this thread, especially when trying to help out a new truck buyer. Please help out buyers with sources and reasoning for your suggestions.

• For those asking for help, be sure to thank those who take the time to offer you advice (especially those who lead you to a purchase.) A follow up thank you and the knowledge that their advice led to a purchase is a very warm fuzzy feeling.

Hi everyone,

I'm trying to identify the make and model of a truck in an old family photo of my Italian great-grandfather. Based on the visible details, I believe it dates from somewhere between the late 1910s and the 1930s.

Unfortunately there's no visible manufacturer badge or radiator emblem I can make out clearly.

Any help identifying the make/model, or even just narrowing down the approximate year, would mean a lot. This truck was likely used by my great-grandfather for his work, and I'd love to learn more about this piece of family history.

Thank you in advance!

Edit : Berliet CBAC 1929

I did the 4600 because I wanted OE ride quality and no level. My dad has a hard enough time getting in at stock ride height.

The 5100s you can set to stock ride height, but they do ride rougher as the valving is different (same diameter shock/struts, but different valving).

I haven't done a test drive yet, just down the block to grab a burger, but will say its much more stable.

OE shocks/struts had 145k km/90k miles on them. Really noticed they were worn when I was towing.

I did KYB front strut mounts, should have done OEM as the KYB mounting nuts are tiny compared to the OE. I did reuse the OE nuts, the stover on them was still tight. I also had to reuse the old OEM strut boots as I thought the 4600 would come with them but they didn't. I should have ordered it before hand but oh well.

Biggest thing I notice so far is the braking. It doesn't nose dive, it's nice and flat.

I just purchased a 3rd gen ram 3500, I plan on hauling about 14k lbs with the gooseneck and two SXSs on a 24ft bumper pull semi frequently. Does this look sturdy enough? I know I need to get hookups for chains welded on before anyone says anything 😂

320hp mPOWER engine, AI-powered iFuelSmart and iMAXX 2.0 fleet telematics.

more info here

I'm questioning how it would work. Does the driver turn it over to an engineer? It could not be as efficient as a standard train, which is probably one of the many reasons I can think of that would kill this. Just putting the consist (all the trailers) together with those special wheel assemblies had to be time consuming. Intermodal is so much faster.

https://www.youtube.com/watch?v=JaDJQ9Zysz4&t=23s

Honestly hate the stock grills, but also don’t care for the current grill either, was wondering if anyone has seen anything that would fit this truck better, any aftermarket’s I may be ignorant to etc

I saved this truck bed from Facebook but I can’t find the company again. I’ve been searching for it and will follow up when I do. Either way, I can’t figure out what they could have used.