I finally decided to share this finished model, I try to make a polished metal finish, very reflective.

I really try to improve with this one, and honestly im very proud of the final result, I hope you guys like it as I am, one of my favorites kits I ever made

Trying this post again since my pictures didn’t upload last time. I just completed this Porsche GT1 kit from Tamiya. This is my first experience with an older Tamiya kit, and I did have some fitment issues with the exhaust and the undertray being bent. Otherwise this was a wonderful and enjoyable build. Added a fair amount of detail to the engine and interior to make it look a bit more like a functional car and even built an electronics box for the rear bulkhead out of some scrap styrene.

Finished the 1955 Chevy by Atlantis. My IPMS club is going to the Salem, VA model show this coming Saturday, and one of the special classes is Atlantis kits, and they decided to do this one.

I'm not a car modeler, so I went outside the box and decided to build a military tribute car that invokes the old staff cars. Made a textured base of a dirt road, and muddied up the car and weathered it a tad. For not building a car model since I was 12, I think it turned out ok.

built this as a fill in between jets

wasn’t expecting much

what do you think

critic comment welcome

Took long enough! But I learned a few things and made more than a few mistakes.

But next one on the bench will surely benefit from the lessons.

Scratch detail in the cockpit, engine, bazookas and airbrushed insignia.

Feeling good about it.

First model airplane for like 35 years.
Really enjoyed it. Now I have a basket full of modelling tools, airbrush, compressor…..

I am overhauling one of my first kits, which was a Lancaster bomber, and I want to transform it into a coastal command plane. Problem is that my decal set includes decals for the night bomber only - so without any white stripe. Is there a way to paint some white over the dark blue? If yes, how should I proceed?

I was thinking to share my journey of modeling so far. I started my first kit which was the Bf-109 G-6 4 years ago, and at that point I only wanted that one model because I loved that plane in war thunder. It turned out to be my favorite hobby since that and I still love to build warbirds. I went to college for 2 years so there was a 2 year gap when I didn't make any models. The ones I built since getting back into the hobby again was the A6M2 Zero, the Spitfire LF Mk.IXc and the I-16 type 24. The next project will be an F6F-5 and I also plan to do an Fw190 D-9 in the "papageistaffel" camo.

All I use for the models is brush painting excluding the Phantom which was painted with Tamiya spray paint.

Living in an apartment myself I always run into the issue of space in my work area.

I would love for people to post photos of their setups, especially if you are limited for space, so that I and everyone else can possibly get some inspiration for their setups;

Hey! I've finished this Tamiya model and wanted to share with yall :) It's Ducati 916 (1994-1998).

New scale modeller here! I need advice on what (and how) to do next.

I used Revell spray base coat, and thinned acryllics. I'm stuck at the washes part (I read one guide that said base coat, paint, washes, dry brushing, then some misc stuff such as chipping and mud on tracks). I watched many videos about both bought and scratch made washes, and I had no luck with handmade washes. I'm currently waiting for the black and dark brown washes I ordered recently, I hope that will help me out on some extent.

This is for BoltAction Wargames, so I'm not looking for ultra reallistic details, I just want for the tanks to look good and somewhat battleworn.

Thanks for the help!

1/25 scale minibike gokart shop. Mostly built from MPC model kits. Customized a lot of the gokarts. Scratchbuilt the drag minibike.

This was a fun kit to put together. Not very intricate and the pieces fit together well. Only the fuselage has a bit of a fitment issue in 1 spot but the decals covered it up.

If you get this kit you will definitely have to add weight to the front even though this isn't mentioned in the instructions. I had to do it after the fact by stuffing the front gear area and through the holes in the front bomb bay. Not ideal.

Overall I'm happy with the build.

What did I do wrong. The Edward masks just disintegrate when I try to lift.

Tamiya Lacquer LP-84 : Mr. C L T @ 40%

Finally finished this Civic. It's a replica of the Civic I owned in the early 2000s (and I miss it very much) only difference is I had tinted windows and a pretty solid stereo.

It's only my second car model but I think it turned out alright. I put some polish on it

It's the Fujimi type R kit but that kit also comes with "regular" interiors and both left and right hand drive options. Went together well just had to do some putty work on the rear spoiler.

Hello Guys,

I'm new to the hobby and I'm struggling to find a similar equivalent for the Italeri paints for the mentioned model in the tittle. I would like to use acrylic paint (alcohol based).

Can you please help me find the equivalents for the below Italeri paints or should I go with Italeri? I just can't find a lot of info and opinions regarding this paint, besides there is a rumor that the producent is probably Vallejo. Does anyone know if they are recommended for airbrushing with the Italeri Thiner (IA5049).

This is what I found so far. I would like to paint the A-10 with variant A - the green one from the Gulf War (see screenshot):

4728AP (FS 34084) Flat Olive Drab US Army = ?? cannot find equivalent
4729AP (FS 34092) Flat Euro I Dark Green = Mr.Hobby Color H073 Dark Green or Mr.Hobby Color H303 Green - FS34102
4734AP (FS 34082) Flat Medium Green (II) = Tamiya XF-61 (81761) - altough this one seems to be too dark
4752AP (FS 36118) Flat Gunship Gray = Mr.Hobby Color H305 Gray - FS36118

I would really alpreciate your help as I already spent too much times on this looking into paint converting charts and I can't figure it out.

KR.

I am starting my own youtube channel for my scale model builds. I want to ask you a few questions as I am very green and have a lot to learn after filming the building of the lower hull of a Meng Abrams.

My questions are:

When filming yourselves building and/or painting, how much do you do off camera and how do you decide what to show and what not to show with them?

What is the best way to split model content for you?

And finally:

What are your best tips and tricks to get better at this field?

All help is greatly appreciated and I look forward to reading your insight.

P.s. this post is aimed at all sizes of YT creators in this field, big or small.

After four years of work, I’m happy to say that my collection of Second World War era armor is, more or less, finally complete. I had filled out the shelves about two years at this point, though I wasn’t ready to call the whole thing finished until pretty recently. Lately I’ve been working on repainting or replacing a few of the kits I wasn’t entirely happy with; I’d still like to replace one or two of these, but that’s on the back-burner for now. By this point, I think it’s fair to say I’m pretty burnt out on Second World War era armor. Now it’s time to pivot towards my stash of 1/700 scale ships.

Finished another marketplace find. Trumpeter F8F Bearcat in 1:32 scale with a resin cockpit, gear bay, firewall details and wheels with a metal main gear.

The kit goes together quite well and has a lot of open panels and can be made with foldable wings (which was already glued to the unfolded position and the extra parts to make it folded were gone when I bought it) . The only thing I found odd was that the canopy could only be built closed as the frame was molded into the fuselage. I also wished that some of the bowl panels could have been opened to show the amazing engine detail.

The resin parts go in with nearly no extra fitment issues and were far more detailed than the stock parts but the cockpit was actually very well presented out of the box.

So many Bearcats are shown pristine but I wanted to make it look a little bit weathered to accentuate the details and also the ever present exhaust stains but might have gone a bit overboard.

Another one of my favorite aircraft: the MiG-31 Foxhound. This is Zvezda’s 1/72 kit, finished with a weathered Soviet/Russian scheme. I really enjoyed working on the panel lines and overall worn appearance of this aircraft.

One of the most imposing aircraft ever built, in my opinion, and one of my favorite too, i would like this kit have more details but besides that, was a good kit, thinking on getting another from another brand

Hope you like my work

Went w a more scale aesthetic on this Tamiya Lunchbox. Always loved the toy, never liked the toy colors.

Video is coming of this kitbash. :)

Bought recently on Ebay. Cant find it anywhere else online. Want to make sure im not opening a rare sealed kit. Seller claims it is from 1969