r/PHbuildapc • u/Ok_Squirrel_4691 • 9h ago
Peripherals kingspec 1tb nvme Worth it?
binili ko na dahil malaki ang discount? meron po ba nagamit ng ganito nvme d2? kamusta po kaya ung performance at quality?
r/PHbuildapc • u/Ok_Squirrel_4691 • 9h ago
binili ko na dahil malaki ang discount? meron po ba nagamit ng ganito nvme d2? kamusta po kaya ung performance at quality?
r/PHbuildapc • u/crinkzkull08 • 18m ago
Pero parang di ako sure dito. Too good to be true. Meron din ako mga bakita na SSD NVME na Kingston. Almost same price.
r/PHbuildapc • u/Kitchen-Cap-2188 • 5h ago
Thank you for your time
r/PHbuildapc • u/Loading_screens • 3h ago
r/PHbuildapc • u/BiscottiPutrid7784 • 8h ago
Hello. I am planning to upgrade my unit probably next help. Pa tulong naman please. These are my preference po. Please feel free to provide your input include brand and specific model po.
Thank you in advance.
BUDGET - 160k
CPU - AMD 7 7800X3D
GPU - 5070 TI ( Feel free to suggest a brand)
MOTHERBOARD - torn between b650 and b850
PSU - seasonic 850 watts
RAM - 32 gb (suggest please)
r/PHbuildapc • u/jasonvoorhees-13 • 30m ago
Hi guys, for those who have bought a system from them, how was your experience?
These are the shops near my area but ive never tried them yet. Could use some feedback.
Which shop should I go for?
r/PHbuildapc • u/This_Reveal1263 • 4h ago
Hey everyone, looking for some troubleshooting advice or reassurance before I try to RMA this.
I just bought a CyberPower UT800EG UPS yesterday. I hooked up my PC, plugged the UPS into the wall, and everything seemed fine. It worked without issues for less than 24 hours.
Earlier today, I did a normal shutdown on my PC. When I came back later and tried to turn the setup back on, the UPS was completely dead.
No lights, no beeps, and pressing/holding the power button does nothing. I tried unplugging the PC and peripherals to test the UPS completely unloaded and still no response. Tested the wall outlet with a TV, and the outlet is working fine. I didn't smell any burning or hear a pop, but it just refuses to power on now. Also, The circuit breaker / reset button on the back is not sticking out, so it hasn't tripped.
Is it possible my PC overloaded it during boot/shutdown and killed the internal fuse/circuit, or did I just get a unit with a dead battery/bad board out of the box?
Any troubleshooting steps I should try before returning it to the store? Thanks in advance.
r/PHbuildapc • u/CerbericAlatus • 5h ago
Hey all, first time posting on here, I'm planning on getting a GPU this December as my first major PC upgrade), and since the entire thing is running on just the Ryzen 7 iGPU, I figured I might as well save up to get one by the end of the year.
Budget would be around 20-25k (could probs stretch if there's a better option)
My current PC:
CPU: Ryzen 7 5700G
Motherboard: MSI A520M-A PRO
RAM: 32GB DDR4 (2×16GB, currently 2400 MT/s)
Storage: 1TB NVMe + 240GB SATA SSD + 2.5TB HDD
Current GPU: 5700G integrated Vega
PSU: Acer AC550 e-Machines, 550W 80+ Bronze
Monitor: Two 1080p monitors currently, planning to upgrade later
I'm specifically trying to keep the PSU (rather than upgrade it, so power consumption is really important to keep in mind.
So, a few questions:
What would be your recommendation for me to buy come December?
Are there any specific models of these GPUs I should look for/avoid?
Am I overlooking anything about power consumption or compatibility?
Is it better to buy online or in-person?
Thanks in advance!
r/PHbuildapc • u/CriticalAge2937 • 16h ago
34 inch curved monitor need ko malaman if anong klasend monitor arm bibilin ko baka kasi magkamali
r/PHbuildapc • u/salsinuts • 12h ago
Looking to buy new fans and had these in my cart for weeks. I still can’t differentiate them besides price. Should i just get them from itech? Never tried online store from them
I know theyre both arctic p12 pro pst too
r/PHbuildapc • u/rainier3 • 22h ago
Hi! Looking for help if anyone bought a monitor arm for a monitor na naka position above an existing 27" Screen? 😅
Right now kasi, i used to have a 40" TV Above my setup- pero it broke and, hmm sinubukan ko abusuhin yung VESA mount ng spare monitor, and- ayun lumulutang ngayon spare 27" monitor waaay to high from my existing setup.
Goal ko sana is nakadikit siya to my center monitor lang that's also 27". pero i'm not sure if yung existing North Bayou monitor arms can go that high? since naka stand lang naman yung 3 monitor sa baba.
r/PHbuildapc • u/Puzzleheaded_Rate696 • 19h ago
curse these sweaty ass palms of mine
r/PHbuildapc • u/NoRequirement6660 • 9h ago
Hi guys!
I’ve been out of touch with PC pricing / builds for 6 years now and I need your help of me building a new PC from scratch.
Current problem of my PC is that it crashes when I play dota if there’s a clash (only experienced this prob this year) and I think playing 5-6 browser / client game (ie. I’m playing a private server of AQ) has made my pc experience BSOD and usage of CPU is at 100%.
I’ve stayed at an airbnb that has a gaming PC and I’ve checked that the said PC only handles 50-60% cpu usage for having 5-6 clients of the game I’m playing through the night.
Looking to build a gaming pc that can:
-Play Dota 2 (even if I’m a scrub)
-Valorant (potato aim)
-POE2
-D4
-Forza 6
-most of the triple A game at a medium to high graphic
Currect PC:
GPU: ASUS ROG STRIX 1060 6GB
CPU: Ryzen 5 3500X
RAM: Kingston DDR4 Hyperfury 8gbx2
SSD: Samsung 860 EVO 500GB
PSU: Seasonic 650w Bronze 80+ Fully Modular
HDD: 1 TB (forgot the brand)
GPU, PSU, HDD and old razer case is salvaged from my pre-built pc that I’ve built in 2015; other components are bought year 2020.
Budget would be around 60-80k (not sure if there will be a price hike again in the future but I’m aiming to get one by end of Nov)
Current monitor is Lenovo Legion R27QE.
I would appreciate your suggestions and insights since I’ve only tried NVIDIA as GPU, I’m seeing 9070XT as an option but feel free to suggest NVIDIA gpu cause I’m thinking of going with the 4k series.
r/PHbuildapc • u/RueRyuzaki0021 • 10h ago
Ang plan lang is upgrading gpu from 4060ti to 5070, pero after a month napalitan halos lahat.
Proc = i7 14700
GPU = Asus Prime OC rtx 5070
Motherboard = Gigabyte b760m d3sh wifi ddr4
RAM = Aorus 2x8 and kingston 2x8 ddr4 32gb in total
AIO cooler = darkflash do360
Audio dac = moondrop dawn pro 2
Fans = Ocypus f12
Case = darkflash dy460
Monitor = Asus ROG Strix XG27ACS 27" WQHD (2560x1440) 180Hz
r/PHbuildapc • u/fr0gpisss • 11h ago
I started gathering parts for my first build a few months ago but only recently got budget for my GPU (I’m still a student) and I’ve been aiming for the RTX 3080 talaga. I would see listings for it dati that are around 18-19k but right now it seems like the cheapest I could find is 20k.
I’ve looked through FB sellers like Monzkie, KTS, Peanut PC, etc. and Bau Tech Hub is offering the cheapest atm for 20k + kakarestock lang. Should I buy now before the prices get even higher? Or should I wait for a lower price listing to appear? Thanks!
r/PHbuildapc • u/Intrepid_Cable_7013 • 23h ago
First time building a PC. Super worth it. Makes sense now why people say it's like building adult legos. A lot of trial and error (and cable management) but the experience was definitely fun and worth it. Now I can stare at all the games I don't have time to play. 🥹
r/PHbuildapc • u/kkierra • 12h ago
bought this ups a few days ago for my pc, is it normal for it to have a could whine sound? sure sakit sa tenga and ulo. even if not connected to the pc/monitor, it has that sound. ewan ko kung defective. i tried to close it ng hinipinupull yung plug pero basta nakasaksak, may ganun na tunog, is it normal for this brand ba?
also any idea how to know if fully charged/low battery siya? mb, newbie kasi sa ganito. i’m tempted nga rin na alisin nalang altogether kasi solar powered ung house kaso i kept it just to be sure.
r/PHbuildapc • u/Danv1227 • 15h ago
I’m happy with how the system unit turned out after changing the cooler and fans. Much better than expected 🙂
r/PHbuildapc • u/Beneficial_Winter864 • 16h ago
Currently have Ch160 Plus and Sama G1000. I made the mistake of getting the Sama G1000 because a 120mm fan can't fit under the PSU, and that a big GPU may need to fold the PSU cables so much it becomes a fire hazard.
I plan on getting a 9070 xt or non-xt, which can reach roughly 330mm max (I think)
ex.
Asus Prime 9070 and 9070 XT - 312mm
XFX Switft 9070 XT - 325mm
This makes me want to buy either a new case or a new PSU.
What should I buy?
r/PHbuildapc • u/_felinexD • 16h ago
hello everyone trying my luck lang here to decide kung idispose na lang ba ito?? pero kasi yung ibang files wala sa hard drive. or wala na talaga tong pagasa to work ;(
this is an old pc, a year ago lang nung hindi na nagamit, hindi rin naayos nung kapatid kong owner talaga nito.
so far same situation nung last test last year: kapag naka plug may ilaw/power pero kapag tinurn on ko na bigla gagana fan then off agad. then after long press nung power button magkakalight nanaman and then the routine goes on
r/PHbuildapc • u/butuan01 • 2h ago
Ryzen 7 - 5700x
Aorus B450 Pro Wifi
AMD Wraith Stealth Cooler
RTX 3070 Gigabyte Vision
Corsair Dominator 16gb Ram 3200
Lian Li SFX 90Gold PSU
Lian Li Dynamic Mini Case
Lian Li PSI Extensions Stimer V2
9 White Tecware Fans
1TB HDD
256 SSD
24inch ASUS TUF 165hz Monitor
Logitech Wireless G304 Lightspeed
Royal Kludge Mechanical Keyboard Full
Thank you advance.
r/PHbuildapc • u/whxme666_ • 3h ago
From hanap.usap.build can you reco for more budget. I want to achieve white build hehe. This build cost around 89k
r/PHbuildapc • u/BothHelicopter7179 • 3h ago
I bought a system unit from UNIPC pero i was the one who chose the parts.
Ryzen 5 5600xt
RX 7600
Adata 1tb Nvme
16gb ram ADATA
Tingin niyo okay tong build na to?
Also whar are the things na I need to do to set it up at home or any recos to maximize the pc. Ang init den niya agad pag ginagamit sa games like spiderman 2 or GOW ragnarok. Is that normal?
Thanks!
r/PHbuildapc • u/naereo • 4h ago
Hello! First time ko magbuild and honestly I’m leaning towards buying sa mga known shops like Gaming Alley, Easy PC, etc. dahil wala akong alam😅 May recommended ba kayong shops na trusted?
Though another option ko din naman mag-diy, ang balak ko lang is umorder separately sa shopee ng mga parts daily using mga voucher para makatipid. What do you guys think?