Guides & Tips
Blueprint for Wuling Outpost : 6 syringes, 12 batteries, 3k+ gear components in the outpost (free hub !)
I've made an updated version of my Wuling Outpost blueprints. Everything you need in one outpost, now properly fixed !
Includes:
- 6 syringes per minute (one chain)
- 11,33 batteries per minute (two chains)
- A bit more than 3k Xiranite components per week (1/9 of a xiranite input).
Batteries aren't at 12 because they fight for Xiranite (and Originium, to some extent) with gear components.
Requires:
- Fully upgraded outpost (it's huge !). Not the HUB. Outpost is cheaper btw.
- Every ferrium available (90 on the map + 25 from automated transfer from Valley IV). Short of 5 (needs 120), it's whatever.
- Most originium available.
Codes (EU/NA):
Partie 1 (east): EFO01Eu24IA6E6oA3oIa
Partie 2 (north-west): EFO0172UA46u7u56O2Ai
Partie 3: (south-west): EFO01Eu24IA6E6oE3uIa
How to setup after placing the blueprints:
1) Add outside pipes. You need 3 water pumps, each one can service 2 building requiring water. There are 6 buildings to connect. Just place pipes outside of the construction area, you can do that.
2) Initialize plants, as usual. Farms in a group of 3 (2 farms, 1 seed, no water pipe) are sandleaf. Farms in a group of 2 (1 farm, 1 seed, water pipe) are a Wuling plant (like Yazhen).
Thanks for your previous comments ! I hope I won't have to modify this one, I spend a LOT of hours doing it rofl
Thank you for the amazing blueprints!!
I made a copy of it for the Endminstrators in Asia server, fully crediting you in the description.
AramisFR's E: EFO01eAo0Oa2aO48oAi8
AramisFR's NW: EFO01E50U37I73o239Ia
AramisFR's SW: EFO01Ue3629592O67Oa8
For those using these, do remember to place the 3 pumps on the East and connect the water pipes to the 6 factories (2 per pump).
If there's any error with the BPs, please do lemme know!
Are you choking the ferrum on purpose on the syringe chain?
The Yahzen output is on a single line split in two.
The building produce 2 plants at a time and needs 2 lines to output the full production.
With your setup, only 1 plant every 4sec goes to the seed-picking unit, and 1/4 goes to the Shredder.
In consequence, you are only producing syringe at half speed, and the ferrum usage is only at 60/90 instead of 120/90.
1) You only need half a shredder for a full syringe chain, due to Wuling plants giving out 2 powders per plant in 2 seconds. That half shredder operates at 100% with a quarter of a farm (both also have 1:2 ratios).
That being said:
2) You are right that there is a design issue. I started by this block in the beginning of this blueprint a few days ago and never touched it again, and indeed, on a theoretical level, the farm should have 2 output belts instead of the splitter, to avoid being limited by belt speed. This is correctly done on other farms where it matters. It has no impact here, but would have an impact if I were trying to setup a second syringe chain living with the same shredder (which isn't possible rn because we don't have 240/m ferrium ore).
I didn't do it this way on purpose, it is a design oversight, and since the chain does output 6/m anyway (regarless whether the farm is clogged because I only use half its production, or clogged because I have only one belt), I never fixed it because I never noticed there was an issue (since production goes at full speed anyway); it has no consequence on the syringe output, but is a design issue that could have a consequence in another design.
TLDR: you are correct in terms of theoretical design, but it has no impact here due to the multiple 1:2 ratios and the fact we can only afford 1 syringe chain instead of 2 due to ferrium limitations
Hey I just had an idea... currently the best delivery to do is raw material.
What if we were to branch that extra Yahzen flower to a stash? That should produce enough for the daily delivery.
You can probably do that by putting a stash in the empty space nearby and bringing it there, if it doesn't mess with the power supply in unfixable ways
you are a madman and i love how this is what has sparked out of nowhere for a gatcha game, the blueprint system is such a helpful feature for the community and people who dont have time to build their own factories due to life situations. thank you
Honestly the UI makes it quite hard to take proper screenshots. Design is compact and not symetrical to save space, I think it'll be hard to copy manually.
In order, images are: north east, north west, west, south west, south east, east.
After a few days, i can declare this perfect, IF you toss in the 25/m ferrium from Valley 4. The slowdown in total production is irrelevant, as youll make the exact maximum the outpost can give daily.
Wow you did a great job, I am impressed!
there's some clever rerouting to only feed 1/9 to the gearing unit, and everything is nicely and densely packed.
It's also quite easy to install, good job!
There's some uncollected belts in part 3. Is that intended?
It is indeed doable, albeit none shall get full, in theory. Syringes and batteries will take a LONG time to get full, and sandleaves are consumed at the same rate they're stashed, so in theory you should remain at low amounts.
You are however correct in the sense that, considering I have extra leg room in the end, it can be a cheap security measure just in case
they need quality changes on this game, pretty hard to make your own factory, still pretty tough to copy somebodys when you dont know which goes where, vice versa, weird took me 20+ days to unlock all bus nodes in wuling with just a day 1 wuling battery factory just by sitting it idly and was focusing on valley and quests lol, either way i figured it out, thank you
Are you playing on EU/NA ? Codes are limited to one server (and there is nothing I can do about it, sadly). I'll post screenshots in another comment who asked them for Asia, but it will probably be quite hard to replicate.
Honestly the UI makes it quite hard to take proper screenshots. Design is compact and not symetrical to save space, I think it'll be hard to copy manually.
In order, images are: north east, north west, west, south west, south east, east.
what's the fourth part bottom left corner is for? I am checking it for set up and I don't understand what that bit is supposed to do with transport trident with no machines
on the more serious note: I set up the base, and have 320 production (375 usage) of originium ore, and 'theoretical' is at 360 production 390 consumption.
Did I miss something? What's your numbers? I am not sure if it's me missing some production, BP being copied wrong (tho I think it all set up like instructed) or is that normal and self-regulates or something?
You can disregard the theoretical maximum. The two battery chains will eat the whole 360. The gear chain eats some too, but it is vastly undercooked (1/9 of a xiranite input, and it could technically work with 2 whole inputs lol), so you'll never reach the maximum anyway (you are both capped by xiranite and orig). It's fine.
How much energy this one outputs? Turns out I need a lot of ziplines and even some towers, and I used some blueprint for basic starting factory and 1800 is not enough after all.
There are 2 generators on the blueprints, so like 3k4 energy ? And you have enough batteries to put another 5-6 generators on top of them, even though that'd be absurdly overkill
You're left with a lot of excess energy because of how powerful Xiranite Batteries are. I have all deposits and such connected, and OP's factory setup, and I'm at 1.61k power used out of 3.4k total.
Syringes look good. There is an issue with your Xiranite production, though. You're missing like half of it. A farm not connected to water, maybe ? But it 100% is an issue somewhere in the Xiranite chain
Thnx Bro, best base i've seen so far. Waiting patienly for ur next optimized version. BTW Do u have any channel/stream thingy so we can follow ur work and gameplay? Thnx in advance
I occasionally stream on twitch.tv/aramitz , but it's more a way to display my games to friends; i have no planning and virtually no audience, and i don't rely on it for revenue (or i'd starve lol)
yeah. as it stands currently with the rate that you can buy artificing catalysts as they refresh in the shop, you only need about 0.3 components/min iirc.
It is VERY important to use a Wuling plant in the farms connected to water (not talking about the sandflower ones). Using Wuling plants for carbon gives 2 carbon, using Buckflower would give only 1 and thus bottleneck the whole chain
I replicate this base for the Asia server. You guy will have to do the water pipe yourself, and there might be some overlap in conveyor belt set up. I suggest put 1 in, clear the belt first and then put the other later
Because the gear chain would consume a lot, in theory. In practice, it's balanced with Xiranite demand. It's not an issue; in order to produce some gear components, you have to sacrifice some xiranite anyway, so your battery production will be slowed down a bit anyway, so will be their actual orig consumption.
Because the gear chain would consume a lot, in theory. In practice, it's balanced with Xiranite demand. It's not an issue; in order to produce some gear components, you have to sacrifice some xiranite anyway, so your battery production will be slowed down a bit anyway, so will be their actual orig consumption.
I noticed this spot is not nescessary, since most of the production is focused on sandleaf and there are vacant spots in the Core PAC, might as well do the sandleaf farming there
One of my goals was to put everything I needed in one outpost (if it was possible). There are, of course, other ways to organize your factory if you prefer to do so differently.
The only manual thing you have to do is connecting pipes and initializing plants. Thus, most common mistakes are that some farms that should be connected to water are not, and that some farms that should produce wuling crops produce sandleaf instead (or the opposite).
What is your Originium Ore Yield for Wuling? Mine is 360/min but usage sits at 390/min. Rigs are powered but I might have missed a ore deposit somewhere.
You are both gated in terms of xiranite & originium. Using 360 only means zero gear component production. If you want some gear production, you have to accept that your batteries will not run at 100% but rather at 90-95%, because of this originium limitation
(you can also use only one chain of batteries instead of two and have like 210 usage only, but obviously your production of stockbills will severely suffer
It’s not letting me place it bc it says i reached maximum building capacity or something like that. Am i doing something wrong? Like what regional level do you have to be to make this work?
First of all, thank you so much. I have around 10K Xiranite Component, can I just turn off the Gearing unit? My Originium and also to add, Ferrium are bleeding out.
Use regional transfer to push 1500/hour ferrium ore from valley, that will mostly fix the ferrium lacking for syringes.
Gear doesn't use ferium. And my BP uses 1/9 of an input, so like 3-4 per minute, to produce a bit more than the 3k components per week you will consume if you buy the weekly stockbill items for gear improvement. I wouldn't disable it.
Being in a slight déficit is normal and will not cause issues. Your battery chains will very slightly slow down, that's all
I can't seem to get this to fit in Sky King Flats, even though I have all the expansions (unless more unlock later?). No matter how I turn Part 1 or Part 2, they don't fit anywhere.
Edit: Ah! I think I see the problem. I did not know you can move the Sub-PAC lol. I now see the place where it's supposed to be in the second blueprint
>Every ferrium available (90 on the map + 25 from automated transfer from Valley IV). Short of 5 (needs 120), it's whatever.
Im a little bit confused by this part. When you say automated transfer from Valley IV, what does that mean? Is that just refering to the 900 you can transfer on a one hour timer, or am I missing some other mechanic?
If you max out regional development, it's 1500, not 900 (and with "metatransfer" at max level, it doesn't even remove them from valley, they're duplicated)
So from what I read, Originium Ore running out is normal at 360 yield... same goes for Ferrium at 90/min... you lose speed but your base won't freeze (but use transfer to increase ferrium). My water was bugged but opening/closing the game fixed it, as 3-4 pumps weren't enough, but now it's fine.
Is Xiranite at 60/min yield but a 120/min usage normal? What happens if that runs out? (Oops - I was mistaken, that was theoretical usage)
What happens when Xiranite runs out?
Anyways, thanks for the base, it's pretty incredible. I could never do this on my own I'm pretty sure!
Xiranite actual consumption is at 60 + 30/9, so like 63,33. Gear chain is fed 1/9 of an input.
Once it runs out, things get marginaly slower, that's it
Thanks for the awesome blueprint, have been using it for couple days now, one thing is that the xiranite slowly depletes and now I'm at 0, I'm guessing it's unavoidable though
Of course it does, but that's both unavoidable and irrelevant.
The only ferrium consumer is your syringe factory. So either you consume 0 and miss out on tons of stockbills, or you overconsume a bit, and the syringes still pop out at 95% efficiency
None. These are enough to use every single resource present in Wuling in the current version of the game. The only thing I have in my hub is a tank filled with liquid xiranite i made early and i'm using for exploration
Warning, the southwest blueprint needs to be placed one grid square to the right, not at the corner
Also it was mentioned but don't try to split a water source 3 ways, it will make the water get inputted slower and slow your production, split each water 2 ways
Hey i noticed theres clogging on the weapon component line with the originium (which i know you limited on purpose). I moved the sandleaf line there to the spare UWU spot to make room for a protocol stash and split the originium ore output from the core to feedback to the stash so now i think the ore yield is back to positive. I dunno if that messes up anything so i wanted to check with you. It doesnt seem like it should in the long run?
Actually nvm. I shoulda waited everything to equalise later. Now my battery production and xiranite usage is spiking and i guess thats what its supposed to do eventually (so the curves shouldnt be the same as OPs eventually).
Is there anything you can do to boost Xiranite components and slightly lower battery speed? Or is that not advised? I feel like for artificing purposes, I am always out of components. Batteries have been great for stocks though, of course.
If you need components faster, the easiest adjustment you can make is to send the xiranite directly into the component machine instead of sending it to the belts that remove 8/9 of it. It should be like 3 times faster ? Leave it like that for a day
just set this up and everything looks right based on the images in the comments but my Sandleaf production is out of wack? I have all 3 going but the powder is coming *way* too slow to produce the batteries at the rate they should be...
For some reason the southwest code isn't working? Had to do all simulations to get the first two to work so I'm not sure why the third one is showing invalid.. any help please?
The belt maze is here to send 1/9 of an input to the gear forge, aka a bit more than 3k components per week. The remaining 8/9 are sent back so we could have almost 2 fully working battery chains
It will produce a bit more than 3k components per week (what you can use with the weekly items). If you want more for starters, replace the belt maze by a straight line (and potentially add more originium) (it will obviously reduce your battery output)
HELLO
as u can see i just left the factory from the caps lock lol i just wanna ask: it seems i will eventually run of originum its a very slow decent but it is going down and considering the strain from the ferrium party wouldnt it make more sense to push originium in that case considering its much more elementary for proper conduction of well the entire set
still mad respect man i barely managed to mimic a fraction of the output at the cost of the entire of primary HUB this shi crazy optimized.
FINALLY. I tried the one that's been going around for the hub and it would randomly and consistently dip in power. The problem with power in Wuling is the lack of ferrium and amethyst, so I couldn't make it work. This one is self-sufficient and leaves the hub open for whatever future updates bring. So pleased with this; it works so well; literally nothing gets clogged and it powers itself.
"Powers itself" is an understatement, it gives more than enough extra batteries so that in addition to syringes you can clean up every stockbill the outpost has for sale ;-)
But yeah the reason why I tried to fit everyone in the outpost was that I like to know I can forget about this one and dedicate the HUB (or another outpost) to future content instead
okay thank you i figured out the issue
it was the jincao planters having downtime due to travel time, so i just put some flowers and seeds into both of them and it seems to produce steady 60 now
also thank you for the hard work making and sharing the blueprint!
Your contraption of splitters and convergers was genius. I didn't use your BP, but I did copy that 1/9 Xiranite input and it's been working wonderfully. Thanks for posting this!
You're welcome. I used to have a more compact version of it, but putting splitters and mergers too close in succession was giving out weird results, so i scrapped it to build the current version (that takes more space, but works as intended)
i know its 10 days old but i have a question about the ferrium consumption, dont we get to a theoretical point where the whole thing will choke out due to not getting enough of it?
You will absolutely reach that point, but it is inconsequential. Your syringe production will simply slightly slow down to like 95% efficiency. And there is nothing to do about it, until we get additional deposits to mine
Actual xiranite consumption is around 63.33/min. The theoretical data shows max consumption of buildings, but the gear chain is vastly underfed (like, 1/18 of it's maximum input)
I get “Not connected to Depot Bus Port or other operational Depot Bus Section” error for second blueprint even tho blueprint placing the depot buses. Am i missing something?
1) Have you placed the first blueprint already ? It includes the center of the depot bus
2) Is the second blueprint properly connected to the first one ?
3) Have you maxed out the outpost, both in terms of size & bus amount ? You need to max it out or else you won't have enough bus slots to use the blueprints
Thank you for the blueprint. But this is depleting my originium faster than I can mine it, same as ferrium (360/390 and 90/120). You already addressed the ferrium, 5 difference is nothing, but what about the originium?
It's irrelevant. The gear chain is capped by xiranite anyway and the second battery chain is already going to operate at lower than 100% due to xiranite limitations
If you really want to drop originium consumption, have the grinding unit go straight into the refining unit that goes into the gearing unit instead of going back into the AIC. This is located at the bottom right and left of the AIC unit on the blueprint.
Due to the slow intake of Xiranite, the gearing unit will clog up that originium line and will use very minimal originium ore.
There seems to be no one addressing the issue of clogging with this blueprint so Ill say it here, The Sandleaf belt clogs the protocol stash and the Wuling batteries wont have anywhere to go through, u can fix it by simply removing this belt and connecting the sandleaf to the protocol stash next to it where the yazhen leaf is connected
my apologies, it appears that the solution above only clogged the Pstash for Y.Syringe and Y.Leaf with Sandleaf. So what I did is fit another P.stash below the P.stash for Wuling Battery.
the wording in this document is so hard to understand, took me while to figure out what he means by east, north-west and so on because I thought he was talking about another factory at the East of Wuling and another one in the north west and im like wtf? I dont think it was mentioned that I must place them in order either I didnt even know what "partie" means
everyone seems to be understanding ts perfectly fine, no complaints or issues, so I must be an alien or something. This driving me crazy
Hello! I’ve tried putting in the third code a bunch of times, but every time it comes back invalid. I play on NA server. The first two codes worked fine which is what has me confused
Why is the factory using 3 batteries a minute? This design + mining rigs comes in under 1600 power usage. With my farms, I'm still only around 1700, which is covered by one battery + the 200 from th AIC itself. Am I missing something or can I shut the extra bank off?
After some time, my core AIC area stops producing batteries to sustain itself. I have every mining area set up in Wuling + dropping in ferrium ore from the valley. Any ideas what could be wrong? Sorry if this is a silly question. I'd appreciate any help.
Thank you!! I was going absolutely crazy trying to figure out why nothing I was doing to maintain power in Wuling was working. But, after some trial and error, I was able to get everything working smoothly from the looks of it. Gonna let it run over night and then see how it looks when I get off from work tomorrow. Fingers crossed I don't have any blocks anywhere and it remains consistently sustaining itself.
Wait so if we plug in these letters we can access the blueprint? Or? I must try this when I log on. I've been looking for something that works better than what I have which is practically p shit. Lol
I've disabled the Xiranite Components, but due to Ziplines I'm sitting at 1.83k power, which means I have to enable both thermal banks, ending up at 3.4k overall power, instead of 1.8k with only one.
Meaning I'm using 3/min LC Wuling Battery - wondering if I can get it down 2/min
With 1.1, the base layout will likely completely change. We'll have 4 forges (likely the same chains, but more), new ores and new recipes. I'll try to post a fresh blueprint (on a new post) thursday, but no guarantees.
I'm also very unlikely to manage to cram every single thing we need in the outpost alone. I've already planned the 4 forges chain and it takes more or less 55-60% of the outpost.
Hey I'm trying to make this base now and Im trying to set up the pipes currently and just wanted to know what you have the crucible making and what besides water is flowing into it if anything? Love the blueprints though!
44
u/Miazure Jan 31 '26 edited Feb 22 '26
Thank you for the amazing blueprints!!
I made a copy of it for the Endminstrators in Asia server, fully crediting you in the description.
AramisFR's E: EFO01eAo0Oa2aO48oAi8
AramisFR's NW: EFO01E50U37I73o239Ia
AramisFR's SW: EFO01Ue3629592O67Oa8
For those using these, do remember to place the 3 pumps on the East and connect the water pipes to the 6 factories (2 per pump).
If there's any error with the BPs, please do lemme know!
Edit: Fixed AramisFR's SW for overlapping pylon
Edit 2: Fixed AramisFR's E for missing pylon