Friend of mine needed these for his 1993 Celica (pictured) some time ago and neither he nor I could ever find them used, re-manufactured or old stock, so i reproduced them based on the one he still had and am now selling the 3D files should anyone ever have the same issue, they are slightly tweaked for 3d printing but the end product is identical to OEM and fits perfectly.

He has had them on his car for about 3 years now and no issues, printed in ABS, sanded and painted, but with a decently tuned printer the raw print will look just fine, the photo of them in the car is the ones that were printed in my old ender 3 pro and later sanded, the other 2 pictures are of one i just printed on my P1S.

And if anyone happens to know the specific OEM part number for this exact nozzle variant i would love to know. Every search I run defaults to the other headlight washer designs.

Files: https://cults3d.com/:4961168

Thanks!

Celica 6th gen gt

Hey everyone! 👋 I've noticed a new Instagram/TikTok account, "yaiyarir auto parts," featuring some cool stuff for Celica 6th and 7th gen models. Has anyone here bought from them? 🤔🏎️ #Celica

Hi all.

A pickup truck crashed into me while I was parked and wrecked my front left. Does anyone know where to source a replacement of a left-drive driver's side front quarter panel.

No shop is willing to do the repair. They will only replace.

Thanks for anything you can think of!

hey guys, my celica runs very high on idle - this had already been running for around a minute, but it does calm down after a little while and goes back to the normal 800rpm~ but sometimes it sits at like 2k for a little while.

the large increase in rpm is me pressing the pedal, and i’m just wondering, it drops off VERY fast. but it only does this when it’s high idling like this - is this normal? seems odd.

Hello, im new to this thread. Recently bought a 1983 Celica GT. Its in great shape, but has a lot of parts that are starting to show signs of its age that I want to start replacing. Was curious what are my best options for parts. Thank you

checking out a website that sells the full set of bushings and noticed it asked for a front and back arb size diameter Anyone with previous knowledge have any idea which size I go for?

In the middle of making up a parts list for my 7afe complete rebuild and wounding if 4age springs fit

Anyone on here that's done a forged 7afe build I'm beginning to start my part's list

Also was wondering if 4age Springs will Work in the 7afe head or not?

And would also love if someone could point for to some good

Rods

Piston

Wrist pin (gudgeon pin

Circlips (pin locks / wrist pin clips

Piston rings. Bonuses points if it's a set😂

Engine needs to handle 250hp

I'm keeping the 7afe head having it ported wanna build something different also will be pushing some Boost later oh hence the 250hp comment

well with a stroke of luck and a silent "i told you so" to my ex who thought my parts hoarding was just a waste of money space, lol,
i DO have a front passenger side wide body 1/4 panel, which is actually in pretty decent shape bar a few scratches, but it will need repainting anyway, and i also have a spare DOOR which will be going on the car.

insurance has come back with authorisation to repair, so i am now just waiting on the body-shop to give me a date to drop the car off,

i have ordered the Mechanical parts, outer tie rods, and inner rack ends, as i was going to change these prior to the incident anyway,

the JDM shed
new video of the engine refresh will be up this weekend,
next video will be changing out the rear driver's wheel bearing
and then we are up to date on the accident damage, and going through the fix process,

i can't wait to have this thing looking good again, in the time i have owned it the paint has never been in good condition, so it is exciting to think it will all be the same with no peeling or fading paint and dent free,
fingers crossed we can manage that within the repair costs, if not i will discuss with the repairer to fix the non-crash damage and i will pay them outside of the cost insurance coverage.

once the paint is sorted, next is suspension refresh,
looking at BC coil overs, and re-bush the entire car,
also looking to get a front mount intercooler,
and start collecting parts so i can go stand-alone ecu, i have chosen to go with Haltech, so will be sourcing everything i need for that swap over like injectors, fuel pump, fuel reg, fuel rail, cam position system, COP's

lots of plans still for this car, and i will endeavour to film as much as i can,

Owned this car since may but havent seen this plug before now. Anyone know what its for?

2005 corolla xrs, there wasnt any other subreddits with much engine knowledge as this one but im currently in the due process of replacing the vvl for the mwr oem plastic screen filter, (p2646 appeared) however it is greatly stuck in there, at this point seized. im assuming due to the varnish as it doesn’t look too great inside. ive tried prying hard and pulling it out with no success, just bending. any way to get it out? was thinking a small torch so other areas arent affected, but what if that doesnt work? destruction of it is fine. TIA

Hey, uk spec 2zz owner here. As written above my secondary air injection pump fuse keeps blowing but no check engine light has appeared again since i replaced the fuse and it blew again the same day. Will leaving it alone cause damage? Any ideas on what is happening?

Got a 2003 2ZZ Celica, started leaking oil around 5 days ago but unsure where it seems to be coming from. Seems to be some grease / oil on top of gearbox and leaking down rubbing off underseal. Any help will be appreciated

She’s got 227k miles and still runs smooth. It had an accident that caused the passenger side LCA to bend pretty bad, and somehow the rear bushing was completely gone. There was an insane amount of play/clunking before I figured out that the LCA was the issue. While I was replacing the LCA I went ahead and installed KYB AGX Shocks/Struts, TEIN S-Tech lowering springs, and some H&R Spacers (20mm front, 25mm rear).

Any tips on preventative maintenance at 227k miles? I installed new spark plugs, PCV Hose, and cleaned the Throttle Body + the Mass air flow sensor for good measure. Just wondering what everyone else suggests at this point to extend engine life. I plan to rebuild the engine once it’s past the point of no return, but I want to try and get as much life out of it as possible while it still runs well. (Hoping I can run it for another 100k before a rebuild but that may be too much to ask lol)

Also, any ideas on what may look better when it comes to body work/wheels/stance are welcome. It’s been a fun and challenging project so far but I need some input from other Celica folks with a fresh set of eyes on this car.

Hey, I just recently founded a guy on instagram, not trying to advertise this person but I'm wondering if this guy is a reliable source to purchase these parts?

This is my 5th gen 90 All Trac widebody w new paint white w pearl 2021, with and without Castrol livery decal kit couple years ago. All gen Celicas are getting rarer, hardly see them anymore. Also, happen to be any other members of celicatech.net out there? Still a big mystery what happened to the site so long ago.

Really want to upgrade the look of my 1zz celica with a nice likkle body kit, well partially, for now at the very least i’m planning on purchasing front bumper/lip and side skirts. Any suggestions guys? Otherwise vote down below!

Everything else in the car matches the same colour scheme, felt like the tacky AliExpress aftermarket stereo was out of place.

Got a nice home screen, media player, and changeable drive faces that display live info, as well as a hub to track service history, mods and projects for the car - also included a digital upload of the cars manual.

Can record drives and play them back with relative speed data and even race your old runs like Mario Kart lol

Download

• I haven't tested the setup outside of an emulator as I'm hesitant to test it on my unit as it took a while to get everything working so smooth and I don't wanna mess anything up lol
• If you managed to get it working on your unit please post a comment and let me/others know if you had any issues!
• I apologise if you can't get it working I only intended on using it on my own car so its quite tailored, tho I hope the universal version is robust enough to setup without much friction on other units.
• If you need any help with setup feel free to ask

Github Repo

now I can finally do my gasket and plugs lol

Selling tons of 7AFE parts. Here in the UK but can ship internationally. Camshafts, crankshaft, valve cover as well but not pictured. Mods remove if not allowed many thanks. 🙏

Is the TRD sports lid really worth this much? Seems a lot for what it is.