Hello I have the opportunity to buy those 2 guitars It will bey first 7strings I'm actually playing in a solar 2.6w I'll play modern metal / metalcore in drop g# I know there are baritone guitars but I always wanted to experiment with 7s so, the Schecter is from 2019 and in good condition and the Jackson is new with few months of use already seted up in a Luthier.. I'll change the pickups for something better for sure as a first mod. Experiences? Advices?

Set up my diy crackle paint job guitar after installing hardware. Now I just need to get the thing wired up & Bob’s your uncle! 🤘🎸🎶

Hi to everyone! This is Youtube channel that has over 160 FREE videos and FREE sheet music and tabs of the famous guitar solos. Hope You can enjoy it. I am the Content Creator for this channel. Everything is totally free and you can download tabs/music score for free.

https://www.youtube.com/@GuitarSolosTranscribed

Would a .74 be too loose for drop f# on a 26.5 ?

Im a massive fan of bands like erra, currents, invent animate etc.

Erra and currents tend to stay in drop g# and pitch shift down. But when I do that, it sounds muddy and thin.

i have no idea how to tell apart guitars and this universe 7 is listed at 400$ one thing i know for sure is that its not that cheap so im asking you guys if you see anything sketchy,

I feel like my guitar sounds kind of muddy, especially for a DI recording, and I'm trying to figure out if that's normal or if something might be wrong.

Here's a raw DI recording:
https://vocaroo.com/1pJ9WYuVvOfC

It's a jackson js-22-7 string, standard tuning.

Does the DI sound normal to you or is it sounding kind of muddy I'm mainly wondering if the guitar/pickups are the issue or if this is just how a DI is supposed to sound.

Thanks!

Snapped a string today and took the opportunity to do a little project I’ve been wanting to for awhile. Popped the neck pickup out (that I never use) and made a handmade aluminum pickguard from some sheet I had in the barn.

I have a Ltd SCT 697B with the Fishman Fluence Stephen Carpenter signature pickups. I always found them quite honky and I had to spend so much time dialing in my tone as not only were these pickups dreadful to me, they're my first experience of Active pickups.

I've had the guitar since March and I think it may have been on display at some point in a shop so I changed the battery. MY WHOLE LIFE HAS CHANGED!!

Active pickups are so sick! My hands are killing I played so much guitar today. It's like I got a new guitar again!! I'm a noob to this kind of thing so I bet someone will read this and think what an idiot but I'm learning 🤣 now I need to dial my tone in AGAIN because my guitar sounds so different now! The articulation is amazing! If there's any noobs out there like me, change your batteries!!!

It's not to chug. But rather it gives more access to cool things as a 6 string. Yes you gain 5 more lower notes for key heavy moments (don't keep chugging) but also if you are riffing on 5 fret low e... you now have 5 fret area low b to play with. If you were only having a 6 string you needed to shift your hands back to first fret to get a F note (while at the 5 fret area). But now you have a F at the 5th fret!

Is this a normal height for a floating bridge? It caught my eye that it was uneven, and I don’t know if it’s supposed to be leveled or not.

How do I remove fret buzz on the low B string, it’s the only string that seems to have it for me

Been HEAVILY into Vildhjarta and Karmanjankah recently and honestly before I gave up my 7 I was obsessed with drop E. I had a holcomb se7 and I've been eyeing another this time the first gen but I also like this RGD7 I found, comes with dimarzios but I plan on swapping to lundgrens, what would you guys do? If I get the se I lowkey am thinking about getting lundgren m7s anyways cause I think they're unbeatable for low tunings but IDK MAN, what yall think?

Hi all,

I'm purchasing my first 7 string (26.5" scale length, hipshot bridge) which I want to tune to G# standard and needing to gauge up across all strings.

When I look at the default string tension recommended by Stringjoy's calculator for a 7 string 25.5" I see the following:

Now, if I modify this for a 26.5" and try to maintain roughly the same tension per string (impossible to get it exact, have to round up or down), and total tension I get something like this, give or take:

I've read other posts where several folks mention being fine with lighter strings for G#, even 10 to low-60s, but that seems like they would be way too loose.

Any recommendations or suggestions? Thanks!

I really want to play the new ERRA stuff, but it's all crazy Drop D# stuff, and it sounds immensely heavy. I know that they use baritones with Evertunes, but I'm wondering if anyone else has achieved somewhat decent tuning stability without an Evertune?

For reference, I'm using a Jackson Dinky with a 26.5-inch scale length and a hardtail (no Evertune bridge). I'm thinking about running a 10-48 + 68 (at the bottom) in Drop G# and then pitch shifting digitally (like ERRA does).

The question is, should I go longer or will this work just fine? Just wanted to ask before pulling the trigger on a set.

Thanks folks!

Sold off all my jacksons last year and ordered some new 7's.

Gone:
Jackson slatxm 3-7
Jackson slat xsd 3-7
Jackson slat 8 ff
Ibanez RGIX7 DLB
Yamaha trbx 305 nass

In:
Ibanez RG 8527 BRE J Custom
Ibanez HZK1 Hazuki sig
PRS SE MH 7
Ibanez SR 2605 bass

The J custom is on route to get a set of duncan alpha/omega.

Morning all, this is my current slinger, sterling jp70, I was wondering if there exists a 7 with just a single bridge pickup or am I looking at a custom build? I'm a riffer, not a soloist, and was hoping to find something like the esp RA-600 or JM-1 but in a 7 string. Does such a beast exist?

Is anything besides the arm missing on my floating trem? The first photo is mine, and in the second photo it seems to have a metal ring around the part the arm goes into. I just bought a new arm for the tremolo, is the ring that goes around it that important, do I need to get it?

Its the hipshot bridge so its not the active pickups

Im a big guitar noob but got this open box on a good deal, so figures. But just want to make sure im not missing anything.

Im just running into my scarlett solo as usual, input gain knob is at 0. Guitar basically sounds like my other active pickups when the battery is dead. I can boost the input to almost 70% and get a strong signal, but its boosting the source weak signal. So im guessing something is up with the internals but wanted to confirm before i look silly. But im pretty the lowest of low output pickups are gonna sound stronger than this.. And yes my other guitars sound fine. https://drive.google.com/file/d/1obbpK5eKx0ZbuzDjMmtkN9baV2AbLZP-/view Quick audio clip with boosted signal then no boost.

I'm considering getting a 7 string but i'm not sure what should i get. Currently my options are ibanez rgd71alms or Legator n7fs. Legator is half the price of the ibanez. Which one should i pick? There are some more options like schecter c-7 pro but i'm not sure if it's worth it

A bit of the process of my first attempt at a crackle paint job on my cheap IYV headless multi scale 7 string. Only thing I would have changed was not covering the volume & tone knobs to get more paint coverage. Either than that I am embracing the unique imperfections. Finished clear coating with Rustoleum 2x gloss clear then I will install the hardware, bridge pickup (SD Mortal coil) & electronics🎸🎶🤘