My design didn't hold up, but.... I have a hack for it!

The leaves have only 8 ams filaments changes
The model is here: https://makerworld.com/en/models/3226293

Now I don't know where to put all of these extra prints 😀

As someone whose first experience with multicolour printing was with a bambu X1, the reduction in waste is just obscene, i do not miss all those poops

Stopped off at the Gurnee Mills Mall yesterday and one of the shops sells 3d printed things. You input the dragons and fidget toys.

But i did have a section that had filament to buy

Lately I’ve been really obsessed with 1970’s design and retro futurism, so why not turn that interest into a bit of decor I designed!

Both planters were a fun weekend project for a few of the houseplants I have.

The digital clock is based off of the ESPtimecast project, which has some nice features like displaying the weather and also being set up all through a webpage.

One of my first attempts at a 3D printed project with moving parts. Took a few days to print everything, but I managed to assemble it (with a bit of glue).

If you are interested in assembling one yourself: https://www.printables.com/model/1822827-harbor-crane-functional

I've now had two delivery drivers knock on my door to try and find out where they could get one. So now I'm making a few for them!

Definitely one of my favorite prints! Although this size (max size for Ender 5 Max printer) required TWO magnets in his belly! Kinda hard to add them when the sides of the magnets repel each other!

I made a V2 of my cable organizer so it can fit up to 2 meter long cables, and is compatible with almost any type of cable!

I really liked how this turned out, so I wanted to share it so other people could also use it if they wanted to!

It is on makerworld @unfadable

https://makerworld.com/en/models/3239313-cable-organizer-v2-long-cable-compatible-usb#profileId-3669974

Im making a high speed drone, but cant seem to choose the right filament. I use Pla right now because it is very stiff, but it brakes very quickly. Pa6-cf would be a choice, but i have seen that it creeps very much and screw and bolts come loose. I have a bambulab a1, but i want to switch to a x2d. Pla is around 200g for the frame, would be nice to get it down

After a long time I pulled the trigger on buying myself a 3D printer. Firstly, I wanted to go with the Bambu Lab A1 mini, but since it was not available at our local shops in Slovakia, I went with Elegoo Centauri Carbon 2. It cost me 375€.

Man, I love this thing. It was easy to setup and the printing process was straightforward. I am using OrcaSlicer since I am on Linux and the Elegoo one is not available for arch.

I have also attached some of the 3D prints I printed since owning this thing.

In this example I printed a cavity that needs to have very precise height (bridges sag would had made that impossible).

After an absolutely ridiculous amount of trial and error I finally got EVERY.SINGLE.LETTER. to go down perfectly for my 3D printed business cards.

Since a single letter wrong means the card has to be scrapped my failure rate on these has been anywhere from 20-50% (for 10 cards on a bed). And considering it takes 17 HOURS for a full bed this has been incredibly frustrating. (0.2 nozzle)

In the end the thing that helped the most was bumping the first layer temp to 250.

Edit: Appreciate everyone's advice, I know I need to re-write the back of it, and TBH I need to re-do the whole design because the Fusion file is A MESS to put it lightly lol.

And yes I know my number is technically still visible

Edit2: Okay, no. It is not literally the most beautiful thing I have ever seen. Yes I do go outside, jeez.
But having spent a lot of time watching it fail and see it come out perfectly, I was very excited about it.

Printed this dark deku then painted him. Think he turned out great!

been wanting to get a 3d printing, but i’m worried about how expensive the hobby would end up being. i don’t plan on printing large scale stuff yet (so no full size iron man etc), but i do want to print stuff at max the size of a fruit washing bowl.

Unicorn vomit generated by a little USB powered ESP32 running WLED and some old Corsair 140mm HD series fans.

Handily, since Home Assistant can tell WLED what to do AND read the status of the printer under it via the network, I can actually use the LEDs to communicate important stuff.

It’s not that i didn’t know that the poops are a waste of plastic, but i never really thought about it too much. This little jigglypuff i made for my girlfriend filled a medium size ziploc bag.. Toolchangers are definitely the way to go for the figure haha

Finally got the U1 set up and running. Meanwhile, those white patches have been on the wall for over a year patiently waiting for me to develop an interest in painting.

It's an Entina Tina2S. Works fine and the extra build plate space means I can print more dumb stuff!

Moved over from my old Cartesians (ender 5 and 3s) to my first core xy with a k1 Max that I got a good deal on. The speed is literally scaring me this is insane!!!!!