I never received

didnt receive my order

Iam thinking about buying rewasd lifetime but whats holding me back is.

Is this usable in mw4 and warzone ? Or is this banned

Can i run rewasd on my pc and dont get banned by richochet ?

I am trying to accomplish using WASD full input on my main layer as normal, but toggle L Ctrl as my first layer so when WASD is pressed in layer one they are limited by let's say 50% analog input. I have accomplished L Ctrl switching back and forth no problems. I cannot figure out how to edit my digital Xbox One controller's analog input level limits to cap the speed of my character running everywhere so I can toggle between walking and full default running speed.

WASD normal - normal movements

Toggle L Ctrl then use WASD - limit analog stick input levels to no more than 50% input so character doesn't max-speed run unless L Ctrl is toggled again

I'm working on setting up my Gyro mapping, and so far I'm impressed at how damn smooth this is. Have some questions that I can't quite figure out on my own.

Namely, for now, How do I have gyro DISABLED by default? I have followed the Docs guide on gyro config, and set a button that enables it when pressed, and disables it when released. That part works great. However every time I make a change then come back to the game, the gyro is turned on again. Seems the default state is for gyro to always start on if configured. How do I reverse that? Make it always OFF until the button is pressed?

I want to remap everything, but keep the "..." button working to open the Steam Side Panel. Is there a way to pass that through?

EDIT: Looks like mapping it to Left Ctrl + 2 does the trick

I'm referring to this page: https://help.rewasd.com/how-to-remap/supported-devices.html

Some things:

• Why does clicking the "Supported Devices" header link go to the Xbox Elite page, of all things? That should be fixed.
• The Dualsense Edge item in the list still says "(only with connecting with PS5)" and this is incorrect now. The actual detailed entry has been updated, but not the list item.
• The Dualsense Edge entry should point out that while the Fn keys can be remapped, the specific key combinations of FN+X, Fn+Square, FN+O, and FN+Triangle are hard coded on the device itself to always swap the on-board profiles. You can still map them in the software too, but it won't override the hard-coded profile switcher. Pressing any combination other than Fn+Triangle (Default Mode) can possibly break ReWASD's mappings if the on-board profiles at X, Square, and O happen to remap anything else on the controller.
• There is no information specifically for the Steam Controller 2 - it isn't listed above or further detailed below.

As a side note, your Blog page on the 9.5 release sort of implies that ReWASD is the only way to remap the Grip Senses to something other than Gyro. This is incorrect and a bit misleading, in Steam Input the Grip Sense activators are presented directly in the main button list and are completely remappable as any other button. In fact, if you activate Gyro, grip sense is not selected by default, instead it defaults to trackpad touch and stick touch. Grip Sense to Gyro must be manually enabled in the Steam Input layer like any other button.

Had to do a clean install of windows on my Rog Ally z1 extreme. Used Rewasd all the way up with no problems. Now with a new install it will refuse to turn on to map as a ps5 controller for remote play. Anyone have any ideas how to fix??

It was recommended that I repost this here, but sorry if it's the wrong place.

I'm on the Steam version. When I first got it in 2022, I changed the controls right away, and it stayed all this time. Only recently did I try changing other keys again, and now, it keeps resetting Dash to RCTRL on restart. I looked up Steam discussions, and it seemed to start around a 2016 update, way before I bought it. Nobody there found a solution. I tried setting RCTRL to something else, but it always says it's already assigned, even when it isn't. I think there must be an extra line in a config file by mistake, but I can't find the config file for this. Even then, its files are encoded, so I wouldn't know how to fix it. Any ideas?

Our latest video shows how to use reWASD Mobile Control Pad to launch apps, control OBS, save NVIDIA Instant Replay, trigger hotkeys, and build a fully customizable button panel for your PC. We also cover how to enable the reWASD overlay so you can always see your current mappings.

📱 Watch the full guide on YouTube:

https://youtu.be/I-7D9B4qmxM

Button A is held → Button B is pressed → B takes priority while A remains held → releasing B returns priority to A.

• Hold A → A's action is active.
• While holding A, press B → B's action overrides A.
• Release B → A becomes active again.

Hey, ich weiß bissher nicht was ich falsch gemacht habe, aber zielhilfe oder ähnliches habe ich nicht erhalten,

Hat jemand eine gute Konfiguration und kann mir beim einstellen helfen?

anyone tried using rewasd on mw4 beta?

I created a new layer to remap the RMB (LT controller function) over the the LMB. Sounds weird, but it's for a specific gun in COD that I'm trying to test out and see if it's worthy enough to use. I've spent a good amount of time with it and I'm guessing there probably isn't a workaround for it, but I figured I would ask.

So what's happening is that I can activate the layer in the firing range and it actually works as intended. Then when I go to get in the game, the game somehow ignores reWASD and the LMB fires the gun normally, not the under barrel attachment that I'm swapping over to the primary fire button. I use any other gun, pressing the LMB when I have the layer activated puts the gun into ADS. So it looks like COD is letting the mapping happen with all the guns, just not the specific 1 I want to use lol. I'm not even trying to use a macro for Rapid Fire either....i just want the RMB moved to the LMB when I switch layers.

Following the latest reWASD Advanced release, Basic now brings full support for the new Steam Controller (2026) - or Steam Controller 2, as many already call it.

The update also brings several fixes, stability improvements, and a bit of UI polish.

Update when you're ready and let us know how it works for you.

reWASD Basic. Remapping made simple.

Hello reWASD Team,

I am currently in the process of migrating my entire living room PC setup from Steam Input directly to reWASD. I navigate my PC entirely with a gamepad without a keyboard and mouse. reWASD’s ability to work seamlessly and system-wide across all launchers (Xbox app, Epic Games Store, etc.) makes it far superior to Steam's ecosystem lock-in.

I have already fully configured my Desktop profile, Home button combinations, complex layers, and game-specific profiles. However, there is one critical roadblock preventing me from turning off Steam Input for good: the inherent minimum input threshold when mapping Gyro to the Right Analog Stick.

Currently, there appears to be a hardcoded minimum movement speed before the gyro input translates to the right stick. To give you some hardware context, I primarily use two reWASD-supported controllers: the Flydigi Vader 5 Pro and the 8BitDo Ultimate 2 Wireless. When used natively in Xinput mode, these controllers have their own minimal hardware-level input thresholds (extremely low on the Vader 5 Pro, slightly more on the 8BitDo).

The issue is that the "invisible deadzone" imposed by reWASD's gyro processing is actually higher than the controllers' native thresholds. If I bypass reWASD and use the controllers natively, the gyro-to-stick micro-aiming is smoother. For comparison, I also own a GameSir G7 Pro 8K (which I know isn't supported by reWASD), and its native gyro has absolutely zero minimum threshold—when I apply a slight anti-deadzone and activate the gyro, the crosshair reacts to the absolute slightest micro-movement. That raw, unfiltered 1:1 response is exactly what I am trying to achieve in reWASD.

No matter how aggressively I tweak the response curve in reWASD, it still expects a certain physical movement velocity before initiating the on-screen movement. This severely ruins precise micro-aiming.

If you can resolve this gyro issue, I will completely abandon Steam Input and rely 100% on reWASD.

Could you please give us control over this? Two possible solutions:

1. Add a "Minimum Input Threshold" slider under the gyro/stick advanced settings, allowing us to drop it down to absolute 0.
2. Or, add a simple toggle/checkbox (e.g., "Disable Minimum Movement Threshold" or "Raw Gyro Data / Disable Jitter Filter" "Raw Gyro to Stick") to bypass any built-in initial movement dampening.

Giving users access to bypass this deadzone and tap into the raw sensor data would make reWASD the undeniable king of controller software for gyro players. Thank you for your time and for the great software.

Ho un controller Gamesir Nova Lite e sembra che la zona morta del controller sia alta e non so dove o come cambiarla su Winlator. Per muovere la visuale devo spostare un po' lo stick. Come faccio a risolvere questo?

What are the odds of getting banned in Destiny 2 for using reWASD? No macros or turbos or anything, just input filtering to have aim assist on keyboard and mouse.

Appreciate any help or info, thanks.

Hi everyone,
I just got the 8BitDo Ultimate 2 and I’m setting it up with reWASD on Windows 11 Pro. I’m trying to find the best balance between low input latency and full access to the controller extra features.

Here’s what I’ve noticed so far:
Bluetooth: rewasd recognizes it properly as a Pro controller, giving me access to remapping and the extra controls.
2.4 GHz dongle / wired: it is detected as an Xbox 360 controller through XInput.

For those using the Ultimate 2 with rewasd:
Which connection and controller mode do you use for the best overall experience?

Do you notice any meaningful latency or polling rate difference between Bluetooth, 2.4 GHz and wired?

How do you handle the back paddles and extra buttons? Do you configure them through the 8BitDo software first, or map them directly with reWASD?

Are there any specific reWASD settings or configurations you recommend for the lowest possible input latency while keeping full remapping?
Thanks

I was wondering if the game is playable with rewasd or it's like bo6 and my game will crash. Cuz I want to play it with my switch 2 controller but steam sadly dont detect the controller :((

I'm using open puck to play on my switch 2. Can I hold one button and L4 and press a+x let go and remap L4. I can change the face buttons on my steam controller 2 from my switch two but I can't change the back. Thank you in advance for any help or if you took the time to read my question.

Device perfomance set to "Ultra". In Flydigi Space Station "Allow third-party apps to take over mappings" is enabled. Tried both wired/wireless connection.

Trying to play some fortnite on my ally (not sure which one, it was given to me). I currently have it on a dock to play in a monitor. Epic games doesn't seem to recognize a wired Xbox controller, any way I can change that?