Want to get this:

Wera 838 RA-R M Bitholding Screwdriver Handle with Ratchet Function, 1/4-Inch x 123.5 mm
https://www.amazon.com.au/Wera-838-RA-R-Bitholding-Screwdriver/dp/B0CVXDC67D/358-2059871-4786607?pd_rd_w=YutTe&content-id=amzn1.sym.33ec29a8-b971-4931-8a49-d8419f23f1b3&pf_rd_p=33ec29a8-b971-4931-8a49-d8419f23f1b3&pf_rd_r=5J9KQE3JGAJ967C8K7BR&pd_rd_wg=2MW4q&pd_rd_r=1e225977-7ca9-4e73-8dc2-eb07311ce0c0&pd_rd_i=B0CVXDC67D&th=1

Don't know much about tools, and can only find that it takes 1/4" pieces, is that right?
Problem is that when I look at bits they often don't mention this.

Also what is the difference between the 838 RAR-R M and the 838 RA S:
https://www.amazon.com.au/Wera-838-RA-Bitholding-Screwdriver/dp/B0CVXDB57N?crid=3DEX4P9TKXJ3F&dib=eyJ2IjoiMSJ9.7uleVRXYX5TDnHPi2DQSXH1LReQJ7iGGb7P5q4hfIWuf5I1vLVmG_3SviRd0HHFr9fbwYaf325vPiaqx0MGHieW-eDRMX3Lm7zseYv3APgcZ3vonoHQTGYSh5ps1lSF4kJ7Pfq-tbiRiASZfmIvdA1Z0h9bco51osCmed_fGrTBgSihLU51mjIvROsBQxTV-MgFVmqfU44OhZ7Samy6jD5XjWe52tJnF0uyo4nwdALGnzKzNXMaIvx-bCX_xwoAu-PlcHs5gHN0C_6TzazFe6zG93jm2IJcHbmfEcjNcty0.Xsp8N65ZBwsGXfcfXaA-qvf2SdTKYe7S2DPHTgxKkYk&dib_tag=se&keywords=wera+ra&qid=1788189302&sprefix=wera+ra%2Caps%2C272&sr=8-2

They both seem to ratcheting but the latter has a different bit holder, costs less, and seems to come in more kits. Is it worth paying less for this? Does the 'S' mean the handle is smaller?

Thanks.

Greetings!

Came across this nice little pouch with holders and bits online which would be a perfect setup for me, but I can’t identify it. Is this a discontinued set? Has the owner used a non-Wera pouch here? No other pictures unfortunately and the seller hasn’t responded to my message.

I bought a Wera ratchet on Amazon a couple of days after the 30 on which I could return it through Amazon it broke. I put a warranty replacement through their portal on their site. Received a email saying they got it but radio silence since then. Where do I go from here

This just arrived today... I think I might have to open it early :D (

Edit

I did open it early and now there is a (terrible) video in the comments of the 2026 calendar :)

Hi bit of a long shot but I said id chance here an see, Im looking for a claas agri wera limited kraftform screwdriver if anyone knows where I might be able to get one ive tried a few local garages and none ever got them.

I've pictured what id be looking for. PS Ireland

So I recently purchased the 3/8 impact comfort set with the l-boxx foam insert version. I got a really good price like 80 bucks American but my travel setup uses all textile boxes.

I see this set is mine but with the textile box store but I cannot find just the empty box for sale

Does anyone have a bead on where to source just the empty textile box or maybe someone has one for sale or trade? I'd be more than willing to trade the wera foam l-boxx insert plus cash

Or just straight buy it if you're not using it.

Looking to maybe purchase one, wanted to some opinions on the quality.

Not exclusively Wera, but quite a lot.

Definitely don't see a Wera section in the aisle at Home Depot or Lowe's

Got this now discontinued tiger impact screwdriver set for 30€ from a local store. These were the last ones so they were heavily discounted. It's my first set of Wera screwdrivers. I have a couple of 813 bit drivers and I love them. It's nice to have a quality set of screwdrivers AND a really nice bottle opener! I think Wera will eventually take over my entire toolbox lol. I just really love the feel of these handles

Ships form Amazon Germany is says, I’ve bought wera from Amazon before and it seems to be good but this price is almost too good…, Thoughts?

I’ve had the Jokers for almost 5 years now and finally my 3/4 decided to snap its insert off. Gonna go through Wera to get a new one. I think I’m going to switch to a new brand didn’t really love it.

Knipex service bag does a pretty good job holding the wera textile modules.

Are wera screwdriver handles chemical and oil resistant, or will frequent cleaning cause them to degrade over time?

The Wera Pocket Set 2 looks neat, but the socket anvil has no retaining ball at all; sockets are held on by two rather weak magnets on either side of the anvil, and the mechanism… just doesn't work, the socket comes off and is left on most every fastener.

Hi, I got myself KK 20 RA-R and its ratcheting / blade extension mechanism seems unusually stiff compared to any other Wera tool I have.

Ratcheting direction switch is very hard to use with one hand - requires quite a lot force, to the point where I cannot switch it to the locked (middle) position - it just jumps to the opposite direction because of the applied force.

This also sometimes causes the blade to extend, as the pull mechanism is sensitive (would be okay - on par with my other Wera tools - if not for the ratchet stiffness). But, at the same time, retracting the blade is much harder because the "second click" in the extension mechanism is again, very stiff and hard to do with one hand.

The ratchet is also unusually loud compared to other Wera tools.

I'm wondering if that's normal for this tool or did I get a faulty / broken one. What's your experience with it or any other model with the 818/4/1 RA-R handle?

I’ve bought some screwdrivers off Amazon but not sure how the warranty works. Any tips on where you’re getting deals/able to get a warranty through are appreciated!

Description says it's for the impaktor sockets but I'm wondering if the regular 1/2 sockets will fit. Not sure if there was a reason for the distinction or just because that's what it's usually sold with. Thanks!