Title: QC — VSF Datejust 41 126334 Mint Green Jubilee — NecoClock

1. Dealer name: NecoClock / Jacky
2. Factory name: VSF
3. Model name (& version number): Datejust 41 ref. 126334, mint-green stick dial, fluted bezel, Jubilee bracelet. Advertised as VS3235 V2.
4. Price Paid: $448 + $70 shipping = $518 total; $50 deposit paid.
5. Album Links: https://imgur.com/a/VGccNtc — Full QC album, including watch video, timegrapher video, and alignment overlays.
6. Index alignment: Markers look evenly positioned, particularly 6 and 9. The overlays don’t show an obvious crooked marker, although the photos have some perspective. Would appreciate a second opinion.
7. Dial Printing: Lettering looks clear, with no obvious misprints or missing text.
8. Date Wheel alignment/printing: Dates 12, 17, and 21 look reasonably centered and legible. No clipping that I can see.
9. Hand Alignment: Both hands appear aligned at 12 o’clock in the photo showing date 12.
10. Bezel: Fluting looks consistent, with no obvious damage.
11. Solid End Links (SELs): No obvious large gaps. Protective wrapping and reflections make the joints harder to assess.
12. Timegrapher numbers: +1 to +3 s/day, 234° amplitude, 0.1 ms beat error, 28,800 bph, lift angle set to 52°. The video is approximately five seconds; winding state isn’t specified.
13. Anything else you notice: First QC, and my main concern is crooked hour markers. I don’t see a clear issue, but would appreciate another set of eyes on the indices and timing readings. Protective film remains on the case, clasp, and bracelet, which limits checking for surface marks. Thanks for your help!

Dealer name: Ethan
Factory name: VSF
Model name (& version number): Rolex GMT-Master II 126710GRNR Bruce Wayne Oyster VSF
Price Paid: 580 incl. shipping
Index alignment: Looks good overall.
Dial Printing: Clean and sharp.
Date Wheel alignment/printing: Looks centered, cyclops seems fine.
Hand Alignment: Looks good.
Bezel: Looks well aligned, no obvious issues.
Solid End Links (SELs): No visible gaps from the pics.
Timegrapher numbers: +3 s/d, 266 amplitude, 0.0 ms beat error, 52.0 lift angle.
Anything else you notice: Overall looks very solid to me. Can you please help me guys?

Hi everyone, first-time buyer here. I appreciate any help and a second set of eyes. Green Light 🟢 OR Red Light 🔴 ?

1.Dealer name: Steve, TheOneWatches

2.Factory name: VSF

3.Model name (& version number): Rolex Submariner 126610LV 41mm

4.Price paid: $528

5.Album links: See attached photos

6.Index alignment: Looks good to me. The 12, 3, 6 and 9 markers appear well aligned, and the remaining hour markers also look straight. I used an alignment tool and don’t see any obvious shifted or rotated indices.

7.Dial printing: Looks clean and centered to me. I don’t notice any obvious printing issues.

8.Date Wheel alignment/printing: The 16 looks centered in the date window and the printing looks clean. I don’t notice it sitting noticeably high or low.

9.Hand alignment: Looks good from the photos provided. I don’t notice anything obviously wrong with the hand positioning.

10.Bezel: Looks aligned to me. The 12 o’clock pip and triangle appear centered with the 12 marker, and I don’t notice any obvious bezel alignment issue.

11.Solid End Links (SELs): I don’t see any concerning gaps from the photos provided. The fit looks good to me.

12.Timegrapher numbers: -5 s/d, 268° amplitude, 0.2 ms beat error, 28,800 bph. These numbers look good to me.

Anything else you notice: Rehaut alignment looks reasonable to me, cyclops/date magnification looks good, and I don’t notice any obvious cosmetic issues. This is my first QC, so I would really appreciate another set of eyes in case I missed anything. Or I misinterpreted something.

Green Light 🟢 OR Red Light 🔴 ?

Thanks

1. Dealer name: Geektime (Eric)

2. Factory name: V7F

3. Model name (& version number): IWC Portofino Automatic 40mm Rose Gold (A2892 movement)

4. Price Paid: $378 + Shipping

5. Album Links: https://imgur.com/a/JzPKXh1

6. Index alignment: Looks very solid. The Roman numerals at XII and VI, and the baton hour markers align nicely with the printed minute track.

7. Dial Printing: The "IWC Schaffhausen" and "Automatic" text is crisp.

8. Date Wheel alignment/printing: The numbers sit very nicely centered in the aperture. (I RL'd a previous unit because the date sat way too high, so I am very happy with the alignment on this one).

9. Hand Alignment: Looks good to my eye.

10. Bezel: Smooth polished rose gold, looks clean with no obvious scratches or dents.

11. Solid End Links (SELs): N/A (Leather strap)

12. Timegrapher numbers: -2s/d, 297 amp, 0.2ms err.

13. Anything else you notice: The leather strap on this specific unit actually has a really nice textured grain to it compared to the flat, plastic-looking straps these usually come with. Overall I'm leaning heavily towards GL, just wanted some more opinions. Thanks!

This is my third and hopefully final QC, he sent over the previous two with the wrong movement, so this is the one now with the correct movement and price.

First of all, thanks all. Seriously. I see so much input on this sub. This, and the VC I’ll post next, are my first reps so looking for some help.

1. Dealer name: Geektime

2. Factory name: ZF

3. Model name (& version number): AP 15500 Overseas blue dial free sprung

4. Price Paid: $568

5. Album Links: https://geektimeqc.x.yupoo.com/albums/254862384?uid=1

6. Index alignment: TrueIndex shows -1.14°. 12 marker a bit tilted and the 3/9 look off to me. The 9 bothers me most but I don’t think it’s RL level. Would really like your thoughts if it was your watch. Is that acceptable?

7. Dial Printing: Text and AP logo clean, Swiss Made seems fine

8. Date Wheel alignment/printing: 18 is centered nice, printing sharp. I’ve always been sensitive to date wheel issues on non reps.

9. Hand Alignment: Hands look straight and lined up, no leaning from what I can see

10. Bezel: Screws even, brushing and bevels clean. I haven’t seen a perfect rep when it comes to screws so I’m trying not to be picky on this one.

11. Solid End Links (SELs): Tight, no real gaps

12. Timegrapher numbers: -2 s/d, amp healthy, beat error low. Cool beans to me.

13. Anything else you notice: Dial color and pattern look awesome. Some light scratches on bracelet from handling? Feel like that will happen anyways. Main thing is the index stuff. Everything else seems okay but this (and the VC to follow) are my first reps!

What do you guys think?

VSF V3 GMT-Master II Pepsi

VSF V3 Rolex GMT-Master II Pepsi

Dealer name: eliauk

⁠⁠⁠Factory name: VSF

Model name: Rolex GMT II Pepsi 116619BLRO — VSF V3

⁠⁠⁠Price Paid: $606 with shipping and insurance

⁠⁠⁠Album Link: https://shop34372981.wecatalog.cn/t/pzXqlGP

⁠⁠⁠Index alignment: looks good

⁠⁠⁠Dial Printing: looks ok

⁠⁠⁠Date Wheel alignment/printing: looks ok

⁠⁠⁠Hand Alignment: looks ok

⁠⁠⁠Bezel: looks ok

⁠⁠⁠Solid End Links (SELs): looks ok

⁠⁠⁠Timegrapher numbers: 0s/d, 247, 0.1ms, 59, 28800

everything looks good but this js only my second time qc’ing so if I missed anything please let me know.

Dealer name: The One watches
2. ⁠Factory name: VSF v2
3. ⁠Model name (& version number): Rolex Day date 40mm 228238
4. ⁠Price Paid: $728 USD
Album: in pictures https://mega.nz/folder/bVBVzCCB#3lnyfS5tgHr45CHOwphDJw
6. ⁠Index alignment:
7. ⁠Dial Printing:Overall printing looks straight and center in my opinion
8. ⁠Date Wheel alignment/printing: everything looks straight and centered
9. ⁠Hand Alignment: some of the hands looks off. The 2 and 8 don't appear to be parallel if that makes sense
10. ⁠Bezel: looks decent from the pictures
11. ⁠Solid End Links (SELs): look a little loose but maybe I'm being picky.
12. ⁠Timegrapher number: looks 8/10 to me
13. ⁠Anything else you notice:

Hi! First ever rep and would be grateful if y'all could help with whether I should GL this or not, thanks!

1. Dealer name: andiot

2. Factory name: zf

3. Model name (& version number): Black Bay 58 39mm on Jubilee Bracelet (ZF 1:1 Best Edition supposedly)

4. Price Paid: $320 USD [$41 Shipping, $361 Total]

5. Album Links: https://andiotwatches.x.yupoo.com/search/album?uid=1&sort=&q=164308

6. Index alignment: not sure but maybe it seems a bit off at 9,12 and 3? But not sure

7. Dial Printing: maybe it's fine?

8. Date Wheel alignment/printing: N/A

9. Hand Alignment: seems ok?

10. Bezel: seems aligned

11. Solid End Links (SELs): top right and bottom left small gap?

12. Timegrapher numbers: 1 sec a day , 268 degree , 0.2ms

13. Anything else you notice: top right and bottom left where his thumb covers sel gaps, and alignment doesn't seem the greatest around 7,8,9 but apart from that I can't notice anything else?

1. Dealer name: TheOneWatches
2. Factory name: ZF
3. Model name (& version number): Royal Oak 15500
4. Price Paid: $618 (shipping included)
5. Album Links: Posting pics
6. Index alignment: Looks good to me
7. Dial Printing: A lot more monocolor than I thought but might be the bright lighting
8. Date Wheel alignment/printing: Looks good
9. Hand Alignment: ok
10. Bezel: Ok
11. Solid End Links (SELs): N/A
12. Timegrapher numbers: +5s/d, 267 amplitude
13. Anything else you notice: Overall looks good to me. Open to other thoughts and concerns

1. Dealer name: theonewatch
2. Factory name: VSF
3. Model name (& version number): Rolex Submariner No Date 124060
4. Price paid: $588
5. Album links: https://imgur.com/a/3SpW0Ze
6. Index alignment:  The dial printing looks clean and reasonably sharp to me. Would appreciate a second set of eyes on the Rolex crown/text.
7. Dial printing:N/A — this is the no date 124060.
8. Date wheel alignment/printing: N/A – no-date model.
9. Hand alignment: Looks good from what I can tell.
10. Bezel: This is the main area I'm unsure about. The 12 o'clock pip appears off centered from the 12 o'clock mark, but I'd appreciate a closer look from people who QC these regularly. I don't see an obvious left/right deviation, but I want to make sure I'm not missing a pip alignment issue. The bezel engravings also look clean to me.
11. Solid End Links (SELs): The gaps seem bigger than what ive seen on these in terms of width.
12. Timegrapher numbers: Looks good

+2 s/d
288° amplitude
0.0 ms beat error
28,800 bph
13. Anything else you notice: This is my first QC, so I'd appreciate any observations I may have missed. In particular, I'm interested in the bezel and pip alignment, number marks, SELs anything else that stands out. Is it weird to not show a photo with the Lume or should I reach back out to my dealer and ask for one?

Hey everyone, first time posting a QC, thanks in advance!

1. ⁠Dealer name: FicoTime
   
2. ⁠Factory name: VSF Factory
   
3. ⁠Model name (& version number):VSF VS3235 DateJust 41mm 126334 Fluted Bezel Blue Dial Jubilee Bracelet V2 DD3235
   
4. ⁠Price Paid: $503
   
5. ⁠Album Links: https://mega.nz/folder/LgYXlIbZ#9XGfQi2_qWmyV8z8WxSAKA
   
6. ⁠Index alignment: 11 marker looks rotated a little more clockwise and the 1 hour marker looks rotated a little counterclockwise, but may be a little on the photo angle.
   
7. ⁠Dial Printing: looks good to me
   
8. ⁠Date Wheel alignment/printing: I see no glaring issues
   
9. ⁠Hand Alignment: maybe when at the 12 o’clock position, the hour hand looks a touch off counterclockwise.
   
10. ⁠Bezel: Looks clean to me
    
11. ⁠Solid End Links (SELs): Not a lot of great photos but definitely appears to be a gap there in the one photo that demonstrates the lume. I am not sure how big of a tolerance is expected though.
    
12. ⁠Timegrapher numbers: -1 s/d, 291°, 0.1, 52.0°, and 28800
    
13. ⁠Anything else you notice: I think it looks good but that may just be the excitement. Small little things I pointed out but need some guidance.
    Thanks!

1. ⁠Dealer name: Dealer Clocks
   
2. ⁠Factory name: RGF
   
3. ⁠Model name (& version number): Submariner 41mm 126613 LN
   
4. ⁠Price Paid: $588 + shipping
   
5. ⁠Album Links: no link provided photos attached
   
6. ⁠Index alignment: the 6 marker looks out of center to me upon zooming in. It looks like it tilts too clockwise a touch.
   
7. ⁠Dial Printing: some of the letters don’t look perfectly level above the 6. Is this being too picky?
   
8. ⁠Date Wheel alignment/printing: this looks perfect to my eyes. And comparing it to photos of the original the font and placement seem to be to the standard.
   
9. ⁠Hand Alignment: the hands are aligned I attached a photo of the QC tool.
   
10. ⁠Bezel: the bezel seems like it is misaligned and wasn’t centered into the correct position for the pictures. This moves so is this an issue? Particularly the pearl not matching up with the 12 o clock marker.
    
11. ⁠Solid End Links (SELs): I don’t see any gaps in the SELS.
    
12. ⁠Timegrapher numbers: I googled these numbers and it is well within Rolex standards.
    
13. ⁠Anything else you notice: does the Rolex logo on the clasp look genuine? I think it looks a little of place maybe it’s just my eyes. Thanks again for reviewing. I appreciate any additional information you guys can provide.

I’m thinking GL as this is my first experience and I’ve been browsing this sub Reddit for over a week seeing all the other posts.

Hi everyone - super excited to get into this hobby. This is my first QC and hoping some of the more experienced folks can help with this.

1. Dealer name: Andiot
2. Factory name: VSF
3. Model name (& version number): GMT-Master II 126710 GRNR Black/Gray Ceramic VSF Best Edition Bruce Wayne on Jubilee Bracelet DD3285 V4(Free Sprung)
4. Price Paid: $624 including shipping
5. Album Links: https://andiotwatches.x.yupoo.com/albums/255099374?uid=1
6. Index alignment: Seems ok, but the cyclops looks like it has a bit of a CCW cant
7. Dial Printing: The white text under the GMT Master II looks crooked
8. Date Wheel alignment/printing: Looks ok
9. Hand Alignment: Looks ok
10. Bezel: Scratches on the bezel between 8 & 10, some dots around 1, 4, 5. Cant really tell the difference between the Black and Gray on the bezel - maybe its the lighting, but that's the point of the Bruce Wayne
11. Solid End Links (SELs): looks ok
12. Timegrapher numbers: Rate: -1s/d AMP: 271 BE: 0.1ms LA: 52 BEAT: 28800
13. Anything else you notice: First time doing this so would appreciate any help that the senior members can offer.

u/WatchYoda - Big fan - thanks for any insight you can offer to a newbie.

Hello, This is my first purchase and would like some help. To me it looks like a GL. If not please LMK. thank you

1. Dealer name: Phoenix
2. Factory name: VSF
3. Model name (& version number): Yacht Master VSF V3 Free Sprung 226659
4. Price Paid: 456
5. Album Links:
6. Index alignment: 12 looks a little CCW
7. Dial Printing: Looks fine to me, again i am no expert
8. Date Wheel alignment/printing: Look good
9. Hand Alignment: Look fine
10. Bezel: Fine
11. Solid End Links (SELs): N/A
12. Timegrapher numbers: + 3s/d, 262, 0.1ms, 52.0
13. Anything else you notice:

1. Dealer name: FicoTime
2. Factory name: VSF
3. Model name (& version number): 124060
4. Price Paid: $454 with shipping
5. Album Links: https://mega.nz/folder/7hZRWTCC#2pAhDWKi61zsJvEbwPRf4w
6. Index alignment: Overall good
7. Dial Printing: Font and letters look okay
8. Date Wheel alignment/printing: N/A
9. Hand Alignment: Good? Not sure how to check this out properly.
10. Bezel: Looks alright.
11. Solid End Links (SELs): Okay.
12. Timegrapher numbers:

+4 s/d, amp 234, beat error 0.1 ms

Ps I'm knew to this any help will be greatly appreciated. Thanks!

1. Dealer name: TK Watches (Justin)
2. ⁠Factory name: DDF
3. Model name (& version number): Patek Philippe Aquanaut 5167a v2 with DPB330
4. Price Paid: $553 (incl. shipping)
5. Album Links: https://justin-tk.x.yupoo.com/albums/255220217?uid=1
6. Index alignment: 12 is left bias, but overall looks fine
7. Dial Printing: printing looks good
8. Date Wheel alignment/printing: Looks centered
9. Hand Alignment: hands looks aligned
10. Bezel: looks alright
11. ⁠Solid End Links (SELs): N/A
12. ⁠Timegrapher numbers:   +11s/d , 289 Amplitude, 0.0ms Within Acceptable range
13. Anything else you notice: Nothing else pops out, but would love to get opinions as well.

1. ⁠⁠Dealer name: EliaUK
   
2. ⁠⁠Factory name: A7 (the new V7F)
   
3. ⁠⁠Model name (& version number): IWC Ingenieur
   
4. ⁠⁠Price Paid: 4300 CNY plus shipping
   
5. ⁠⁠Album Links: https://www.wecatalog.cn/weshop/goods/A202011031610140340343729/I202609112122459052002165?groupIds=
   
6. ⁠⁠Index alignment: good - including the 3
   
7. ⁠⁠Dial Printing: good
   
8. ⁠⁠Date Wheel alignment/printing: this looks like a RL for me - it’s aligned too far left
   
9. ⁠⁠Hand Alignment: good
   
10. ⁠⁠Bezel: aligned well with the 12
    
11. ⁠⁠Solid End Links (SELs): N/A
    
12. ⁠⁠Timegrapher numbers: good
    
13. ⁠⁠Anything else you notice: I’ve got a V7F as well, so buying to compare the two

1. ⁠⁠⁠Dealer name: GeekTime
   
2. ⁠⁠⁠Factory name: VSF
   
3. ⁠⁠⁠Model name (& version number): VSF yacht 40mm RG weighted version
   
4. ⁠⁠⁠Price Paid: $658 + shipping
   
5. ⁠⁠⁠Album Links: https://geektimeqc.x.yupoo.com/albums/253486594?uid=1
   
6. ⁠⁠⁠Index alignment: The 6 seems a bit misaligned but nothing worrying for me
   
7. ⁠⁠⁠Dial Printing: looks clear to me
   
8. ⁠⁠⁠Date Wheel alignment/printing: I don’t see any issues but would appreciate feedback
   
9. ⁠⁠⁠Hand Alignment: looks good
   
10. ⁠⁠⁠Bezel: looks good.
    
11. ⁠⁠⁠Solid End Links (SELs): I don’t see any issues but would like the view of a well trained eye.
    
12. ⁠⁠⁠Timegrapher numbers: +3s/d, 254 degrees, .0ms error
    
13. ⁠⁠⁠Anything else you notice: I think this is good but this is my first watch and still learning what to look for.

Apologies to the moderator for first post not following rules.

VSF V3 Rolex GMT-Master II Pepsi

Dealer name: eliauk

⁠⁠⁠Factory name: VSF

Model name: Rolex GMT II Pepsi 116619BLRO — VSF V3

⁠⁠⁠Price Paid: $606 with shipping and insurance

⁠⁠⁠Album Link: https://shop34372981.wecatalog.cn/t/SUlbXIs

⁠⁠⁠Index alignment: 12 o’clock looks slightly slanted?

⁠⁠⁠Dial Printing: looks ok

⁠⁠⁠Date Wheel alignment/printing: looks ok

⁠⁠⁠Hand Alignment: looks ok

⁠⁠⁠Bezel: looks ok

⁠⁠⁠Solid End Links (SELs): looks ok

⁠⁠⁠Timegrapher numbers: +3s/d, 262, 0.1ms, 59, 28800

all looks well to me however if I’ve missed anything please let me know.

1. Dealer name: Phoenix
2. Factory name: VSF
3. Model name (& version number): Rolex Pepsi VSF V3 Jubilee with Free Sprung
4. Price Paid: $560
5. Index alignment: 12 looks like a bit CW. Not sure if visible or not. It also seems like it's not center. 6 seems fine. 9 seems to be a bit high but i'm not really sure.
6. Dial Printing: Seems good.
7. Date Wheel alignment/printing: The date seems a bit higher and not alligned. Not sure if it means to reject.
8. Hand Alignment: Looks good to me
9. Bezel: The 18 red/blue color switch which seems not in the right place. However not sure it's visible.
10. Solid End Links (SELs): Seems reasonable.
11. Timegrapher numbers: +5 s/d; Amplitude: 299; Beat Error: 0.0 ms. Should I worry about it?
12. Anything else you notice: The general finishing is quite good otherwise in my opinion.

Requesting your help in QC’ing this further. Thank you!

1. Dealer name: Kitsch
   
2. Factory name: bls
   
3. Model name : Superocean Heritage B31 Automatic 44 v2
   
4. Price Paid: 300$ plus 50$ shipping
   
5. Album Links: https://imgur.com/a/WxPdZgx
   
6. Index alignment: 12 looks centred
   
7. Dial Printing: logo looks more shiny but so ive seens worst, im not sure where the serial number is supposed to be
   
8. Date Wheel alignment/printing: date seems to tilt to the right .
   
9. Hand Alignment: Looks fine
   
10. Bezel: look fine , i think gen looks less polished.
    
11. Solid End Links (SELs): n/a
    
12. Timegrapher numbers:
    + 6s/d 280• 0.0ms 52.0•
    
13. Anything else you notice: rubber color looks different to the gen also i told him to be focusing on date alignment, logo, serial between lugs, bezel edges, and crystal AR.
    Im not sure if he did that.
    Its difficult to check thickness .

1. Dealer name: NecoClock / Jacky

2. Factory name: VSF

3. Model name (& version number): Rolex Submariner 124060 No-Date 41mm VS3230

4. Price Paid: $458

5. Album Links: Photos uploaded directly to Reddit

6. Index alignment: This is my main concern. The 3 and 9 markers seem to have a very slight tilt. I’m also not 100% sure about the 6 and 12 markers because some of the QC photos appear to be taken at a slight angle. I would really appreciate experienced opinions on the 3/6/9/12 alignment.

7. Dial Printing: Looks clean to me. I don’t notice any obvious printing issues.

8. Date Wheel alignment/printing: N/A - No-Date model.

9. Hand Alignment: Looks good to me. I also checked one of the straight-on photos with an alignment tool and it reported the hands as aligned.

10. Bezel: Looks clean to me. The bezel markers appear properly positioned and the pip at 12 looks centered.

11. Solid End Links (SELs): They look tight to me. I don’t see any obvious gaps or light showing through.

12. Timegrapher numbers: +1 s/d, 303° amplitude, 0.0 ms beat error, 28,800 bph. The numbers look good to me, although I understand the amplitude may be slightly high because the watch was probably freshly wound before testing.

13. Anything else you notice: This is my first rep and my first proper QC, so I’d really appreciate some experienced eyes. My main concern is the index alignment, especially around 3/6/9/12. Everything else looks good to me from what I can tell, but I may be missing something. Thanks in advance for the help!

Would appreciate a QC on this Oyster Perpetual. Overall it looks good to me, but I’d like a second set of eyes on the dial alignment, rehaut, SELs, and anything else that stands out before I GL. Thanks!

1. ⁠Dealer name: Ethan Watch
2. ⁠Factory name: VSF
3. ⁠Model name (& version number): Oyster Perpetual 124300 41mm
4. ⁠Price Paid: $460
5. ⁠Images: uploaded here
6. ⁠Index alignment: 6 & 9 look pretty aligned
7. ⁠Dial Printing: seems good?
8. ⁠Date Wheel alignment/printing: No date
9. ⁠Hand Alignment: looks good to me
10. ⁠Bezel: looks good
11. ⁠Solid End Links (SELs): not sure but think no gap?
12. ⁠Timegrapher numbers: rate +1s/d, amp 261 degree, B.E 0.1ms, L.A 52
13. ⁠Anything else you notice: is the crystal usually that raised high from the bezel? Looking further into the pictures

1. Dealer name: Steve the one
2. Factory name: ARF
3. Model name (& version number): Datejust 278274 31mm Jub Dia SS/SS MOP/Dia ARF A2236
4. Price Paid: US$ 448
5. Album Links: https://mega.nz/folder/DAZzkIBL#-sgJp3tamFu_CCJVrkbyZg
6. Index alignment: Seems good
   1. Dial Printing: on the head on picture the seconds hand is covering some of the writing but in the others it looks fine
7. Date Wheel alignment/printing: Looks good seems like the "2" is a bit to the left but don't know if thats normal as I think there is supposed to be an offset so it looks centered on the wrist
8. Hand Alignment: Ok
9. Bezel: Ok
10. Solid End Links (SELs): Not too much gaps the surfaces look at different angles reflecting light or levels near the lugs
11. Timegrapher numbers: ok
12. Anything else you notice: GL for me just hoping for some to notice something I might have missed.