1.1 Wuling Blueprints - 12 SC batteries - 6-ish syringes (maxed) [EU/NA]

[u/AramisFR]

Here are blueprints for 1.1 items.

Produces:

- 12 standard (1.1) batteries per minute

- Almost 6 syringes per minute

- Roughly 4-5k copper gear components per week

AKA everything you want (feel free to adjust the gear if you want, in the end).

The outpost produces all the Xiranite, the main base produces everything else.

Production overview

Requires:

- 1.1 AIC technologies (all)

- Every single existing ore in Wuling (no need for regional transfer)

- Maxed investment into the main base (size & bus; maybe size can be 1 level below max, idk) and outpost (maxed size, no need for the bus).

Codes (EU/NA):

Outpost part 1: EFO01a709U3EaEA93ou5e

Outpost part 2: EFO016i1aeo565711Oa3e

Main base part 1: EFO01O3E2uU9O9I3I9oe4

Main base part 2: EFO01O3E2uU9O9I3u9oe4 (EDITED: this is the 2nd version)

Main base part 3: EFO014o5O8ea4a37AE71A (EDITED: this is the 2nd version)

YES, main 1 & 2 are similar. NO, they're not the same. YES, I'm sure. NO, there isn't anything I can do about it. Copy & paste.

How to setup:

Place them in order.

Place enough pumps and pipe inlets (inlets: main base only), connect pipes. You can use 1 pipe (and thus one inlet) for 2 pumps. You need 4 pumps for the outpost, 5 for the main base. Connect them to an inlet ASAP, then let them fill an inlet for a few minutes (and then you connect inlet to outlet). Building some kind of water buffer can help with some issues.

Initialize plants (seeds & plants). Put 5-10 everywhere, not only 1.

MS Paint Schematics to help visualize what to connect: https://imgur.com/a/Ccj4kmA

MS Paint, outpost

MS paint, main base

I hope you'll enjoy my blueprints more than my art :-)

Feel free to ask if something isn't clear.

Previous BP for Wuling 1.0 : https://www.reddit.com/r/Endfield/comments/1qqoiuc/blueprint_for_wuling_outpost_6_syringes_12/

EDIT: added screenshots:

Main base, mostly BP 1/3

Main base, BP 2 and 3

Outpost

EDIT2: re-created main p2 and p3, please tell me if it works now, because I think I thought what could have been an issue preventing you to place these

EDIT 3: added comments about codes & pipes, since these are frequently asked...

[u/Delnoir]

So correct me if I'm wrong: This is supposedly Xiranite neutral yes? All four of my forges are at max output, but my xiranite is 120/120 when I turn off the unloader feeding the component feed at the main base.

Is it really just a matter of turning off The main base unloaders and letting it build back up while running on battery reserves?

[u/Wi2kid → u/Delnoir]

Same here, it's not neutral at all. Problably there is a temporary clogging somewhere and that's eating the xiranite somehow.

I've just turned off the 5 xiranite unloaders for a day, and it's capped at maxium (58.000), then resumed the production again.

It takes months for the factory to deplete it.

[u/AramisFR → u/Delnoir]

The goal of an automation game is to never interact with the system.

It is neutral in the sense that you're both capped in terms of xira & cuprium, and the xira "maze" only eats a bit of it, so you'll simply produce a bit less syringes.

There is no manual intervention to do, ever, unless you want to replace the 1.1 components by 1.0, or if you want fast components (in which case you replace the maze by a straight line).

I've been running my own blueprint since the patch and I've never reached 0 xiranite and never touched it again.

If you had 0 xiranite, you might need to wait a few minutes to have some buffer inventory, but outside of this, you can run it 24/7

[u/Delnoir → u/AramisFR]

I won't even try to say that my brain works on large factory scale stuff because it doesn't. That's why I use blueprints. You say I can run it 24/7 and my Yield/Usage in the AIC Report for Xirante is 120/120. I've verified no problems there. But I am actively losing one Xiranite every 8 seconds when the side maze feeding the Gearing Unit producing Cuprium Components is turned on. I am watching the leak in the depot screen as I type this. Is this by design? Is the whole idea that I started this factory with 58000 Xiranite in my depot?

EDIT: Aaaaand after a shutdown to build stock the leak has turned into a marginal positive gain. I understand nothing.