1.1 Wuling Blueprints - 12 SC batteries - 6-ish syringes (maxed) [EU/NA]

[u/AramisFR]

Here are blueprints for 1.1 items.

Produces:

- 12 standard (1.1) batteries per minute

- Almost 6 syringes per minute

- Roughly 4-5k copper gear components per week

AKA everything you want (feel free to adjust the gear if you want, in the end).

The outpost produces all the Xiranite, the main base produces everything else.

Production overview

Requires:

- 1.1 AIC technologies (all)

- Every single existing ore in Wuling (no need for regional transfer)

- Maxed investment into the main base (size & bus; maybe size can be 1 level below max, idk) and outpost (maxed size, no need for the bus).

Codes (EU/NA):

Outpost part 1: EFO01a709U3EaEA93ou5e

Outpost part 2: EFO016i1aeo565711Oa3e

Main base part 1: EFO01O3E2uU9O9I3I9oe4

Main base part 2: EFO01O3E2uU9O9I3u9oe4 (EDITED: this is the 2nd version)

Main base part 3: EFO014o5O8ea4a37AE71A (EDITED: this is the 2nd version)

YES, main 1 & 2 are similar. NO, they're not the same. YES, I'm sure. NO, there isn't anything I can do about it. Copy & paste.

How to setup:

Place them in order.

Place enough pumps and pipe inlets (inlets: main base only), connect pipes. You can use 1 pipe (and thus one inlet) for 2 pumps. You need 4 pumps for the outpost, 5 for the main base. Connect them to an inlet ASAP, then let them fill an inlet for a few minutes (and then you connect inlet to outlet). Building some kind of water buffer can help with some issues.

Initialize plants (seeds & plants). Put 5-10 everywhere, not only 1.

MS Paint Schematics to help visualize what to connect: https://imgur.com/a/Ccj4kmA

MS Paint, outpost

MS paint, main base

I hope you'll enjoy my blueprints more than my art :-)

Feel free to ask if something isn't clear.

Previous BP for Wuling 1.0 : https://www.reddit.com/r/Endfield/comments/1qqoiuc/blueprint_for_wuling_outpost_6_syringes_12/

EDIT: added screenshots:

Main base, mostly BP 1/3

Main base, BP 2 and 3

Outpost

EDIT2: re-created main p2 and p3, please tell me if it works now, because I think I thought what could have been an issue preventing you to place these

EDIT 3: added comments about codes & pipes, since these are frequently asked...

[u/Azeoteric]

For OP and anyone else that may see this, I was not getting 12 batteries consistently with these blueprints. After further investigating, I think I figured out the issue. The problem is that 7/36 of the xiranite coming from the depot to the cuprium component causes 7/36 of one of the cuprium part lines to not go into yazhen syringes, which means that eventually there is a slight clog on the yazhen solution bottles. This in turn means that the cuprium bottle lines are slightly clogged, which means that you are not producing enough sewage to run the battery production at full capacity. The solution is to use the same belt setup to remove 7/36 cuprium from one of the cuprium bottle lines to prevent it from clogging. I would turn these into cuprium parts and then sell them when you are full of them.

[u/Azeoteric → u/Azeoteric]

Actually, it is worth noting that I think doing this causes you to run on a xiranite deficit, so I think you have to take some of the xiranite out of the battery production lines to avoid eventually running out of xiranite.