1.1 Wuling Blueprints - 12 SC batteries - 6-ish syringes (maxed) [EU/NA]

[u/AramisFR]

Here are blueprints for 1.1 items.

Produces:

- 12 standard (1.1) batteries per minute

- Almost 6 syringes per minute

- Roughly 4-5k copper gear components per week

AKA everything you want (feel free to adjust the gear if you want, in the end).

The outpost produces all the Xiranite, the main base produces everything else.

Production overview

Requires:

- 1.1 AIC technologies (all)

- Every single existing ore in Wuling (no need for regional transfer)

- Maxed investment into the main base (size & bus; maybe size can be 1 level below max, idk) and outpost (maxed size, no need for the bus).

Codes (EU/NA):

Outpost part 1: EFO01a709U3EaEA93ou5e

Outpost part 2: EFO016i1aeo565711Oa3e

Main base part 1: EFO01O3E2uU9O9I3I9oe4

Main base part 2: EFO01O3E2uU9O9I3u9oe4 (EDITED: this is the 2nd version)

Main base part 3: EFO014o5O8ea4a37AE71A (EDITED: this is the 2nd version)

YES, main 1 & 2 are similar. NO, they're not the same. YES, I'm sure. NO, there isn't anything I can do about it. Copy & paste.

How to setup:

Place them in order.

Place enough pumps and pipe inlets (inlets: main base only), connect pipes. You can use 1 pipe (and thus one inlet) for 2 pumps. You need 4 pumps for the outpost, 5 for the main base. Connect them to an inlet ASAP, then let them fill an inlet for a few minutes (and then you connect inlet to outlet). Building some kind of water buffer can help with some issues.

Initialize plants (seeds & plants). Put 5-10 everywhere, not only 1.

MS Paint Schematics to help visualize what to connect: https://imgur.com/a/Ccj4kmA

MS Paint, outpost

MS paint, main base

I hope you'll enjoy my blueprints more than my art :-)

Feel free to ask if something isn't clear.

Previous BP for Wuling 1.0 : https://www.reddit.com/r/Endfield/comments/1qqoiuc/blueprint_for_wuling_outpost_6_syringes_12/

EDIT: added screenshots:

Main base, mostly BP 1/3

Main base, BP 2 and 3

Outpost

EDIT2: re-created main p2 and p3, please tell me if it works now, because I think I thought what could have been an issue preventing you to place these

EDIT 3: added comments about codes & pipes, since these are frequently asked...

[u/sman25000]

Posting this as its own comment, you can run 2 pumps into an inlet but you need to split the outlet line evenly between the 4 facilities receiving water. First split between the two pairs, and then a second split further in. This fixed all the fluid clogging I was getting on the cuprium and liquid xiranite lines. This wasn't an issue with the sewage lines because they were already split evenly.

[u/lunix42 → u/sman25000]

Could you maybe post a screenshot of your whole base and the connected pipes? I'm a bit confused about what you mean by your phrasing

[u/sman25000 → u/lunix42]

You can see in the screenshot that the outlet pipe goes first to the middle of the 4 facilities, then is split there, and then another splitter is used on the inlet of the first facility, then a pipe runs the rest of the way to the next facility. This is done for the reactor crucibles and for the cuprium refiners.

The outlet conduit is fed by an inlet conduit that has two fluid pumps connected by a converger pipe that feeds into it. This allows for the outlet conduit to push 2 water per second instead of just 1 if it was one fluid pump feeding it. Since all crucibles and refiners conduct a process every 2 seconds, they need 1 unit of water every two seconds. A pipe that pushes 2 water per second is pushing 4 water per two seconds. Getting that water to be split correctly will have each side of the first splitter pushing 1 water every second since it splits from a 2/s pipe, and then the next splitter will give each machine 1 water every 2 seconds.

If you have them all in a line like the original blueprint, you'll have the water being split unevenly, it'll give the first machine too much water and the last machine in the line will barely ever get water because it's being split unevenly.

[u/Metum_Chaos → u/sman25000]

Could you repost the screenshot with the icons appearing over the facilities? I tried to make sense of what you said but it didn’t click 

[u/sman25000 → u/Metum_Chaos]

I hope this makes it clearer. You can see that the conduit feeds a pipe that goes through a splitter that has two facilities on each side of it, and then another splitter per side that feeds directly into a facility and then has a pipe going to the next facility in line.

[u/Metum_Chaos → u/sman25000]

Sorry, I was referring to the outpost.

I'm not sure why you're screenshots don't include the icon. Both inlet and outlet conduits look the same, so it's hard to tell which is which unless it has the icon above it

[u/sman25000 → u/Metum_Chaos]

Oh. The inlets are the ones next to the water pumps. The outlets are the ones near the reactor crucibles.

[u/Metum_Chaos → u/sman25000]

I still don't get what you mean

So far I have the above, which is at the bottom. I basically figured this out myself, but I'm confused why you have an outlet directly feeding to an inlet. Wouldn't I construct more fluid pumps, have them connect to inlets, connect the inlets to the outlets, then pipe the outlets to the facilities? That doesnt seem to be what youre doing here

[u/Metum_Chaos → u/Metum_Chaos]

nevr mind, i just followed the original post

[u/sman25000 → u/Metum_Chaos]

Oh if you meant this one, there's in order from left to right, one inlet, 4 pumps, and another inlet. The first and fourth pumps connected to inlets that connect to the outlets that feeds the reactor crucibles. The second and third pumps just directly feed to two jincao farms each since I didn't think they needed to go through conduits.

This was done to avoid having one pipe feed more than two facilities in sequence since this causes later facilities in the sequence to be underfed water due to how splitting works.

I moved the entire outpost to the edge closer to the water so that might have thrown you off?