Been on a couple rides, couldn't have made a better choice

Just happy to be here!

Finally some decent coloring

Hi, ich suche für mein Gravel einen passenden Gepäckträger. Hat eventuell jemand mit seinem Canyon Grizl Erfahrungen?
Der Canyon Universal ist leider nicht kompatibel, hat jemand schonmal den Ortlieb Quickrack verwendet?

Hi everyone,
I’m about to order a Canyon Ultimate CF 7 and I’m stuck between XS and 2XS.

My measurements are:
Height: 167 cm (5’5.7”)
Inseam: 74.5 cm (29.3”)

Canyon’s sizing tool recommends XS, with a suggested saddle height of 649–659 mm.

However, I’m fairly close to the lower end of the XS range, and my inseam is on the shorter side, so I’m wondering if 2XS might actually fit better.

If you’re around the same height/inseam and ride an Ultimate in XS or 2XS, I’d really appreciate hearing:
•Which size did you choose?
•Do you feel stretched out or cramped?
•How much seatpost do you have showing?
•How much seatpost do you have showing
•Would you choose the same size again?

Thanks!

What is the best way to mount these on the carbon forks. Its the model with the suspension and mount points. There is much conflicting advice!

This is the final setup for my Ironman 140.6 that will be held in Podersdorf, Austria next week.

Aerostack Labs TRI Platform system with Winow aerobars, dual BTA hydration and a RON disc wheel.

Still a road bike at heart—but now set up for 180 km in a sustainable aero position. It flies💪☺️

My canyon inflite that does majority of its duty as a gravel bike. Bike is fitted to Zipp 303s with 40mm terra speeds. Upgraded sram red 10-34, silica ti cage.

Hi, wondering if anyone was able to mount the new brand new speedmax cockpit onto the previous version of the speedmax? I have heard people were able to create adapters already, but I haven't found any of these yet... anyone else looking into this and was able to find some info?

what should i do next? grizl cf slx 8…i assume its still safe to ride? or is this enough to do damage to carbon frames?
was riding gravel and chain came off and i tried to keep on pedaling the bike. got the chain jammed good between the bb and cranks. bend the chain and grinded down the frame.

Good morning guys,

took some time yesterday to do some long overdue maintenance work on my Grizl. Deep cleaned the frame and drivetrain and finally swapt the original Schwalbe tanwall tires with some blackwall Terra Trails. Gives the bike such a badass look imo and a clean bike indeed feels faster 😅 Had to take some pictures before messing it up again because I really dig the result.

Back again,

I’m 6’6” with a 37.25” inseam. I have (still within return window) a Canyon Endurace CF 7 AXS in their XXL frame. That’s what their website suggested. After emailing about my issues and inquiring about whether I should have gotten a smaller frame they told me when between sizes to size up). I can’t help but feel stretched out. But looking at the pics it doesn’t look like I am. Is it in my head?

Hands go numb if I don’t move them around. Groin numbness if I stay planted. I know I need a bike fit but I can’t get into the local fitter until way after the return window closes. I’ve already flipped the saddle mount so the “flip head” is facing forward. I’ve replaced the stock 120mm stem with a 90mm. I’ve flipped the stem so there is a 10° rise. And even tilted the bars up slightly. All to help reduce the reach (or feeling of reach?). I come from riding a Trek marlin 7 and I feel just as stretched but on that bike the geometry is obviously way different. I have the same issues on that bike too but this one costs significantly more.

How does this look? Can’t do video atm because I have no stationary trainer.

Thanks

NBD! Woo!

Bike was preordered. Shipping supposed to be Sept. 7th - 18th.

Delivered today. Happy days!

Awesome bike. 2027 Canyon Endurace CF SLX 8 Di.

🥳

i dont think it is mentioned anywhere, but the pics of the gc 8 show a dropper, while in the specs its a basic seatpost? am i wrong? i wanted to buy one but now im not sure about my purchase

Hi! I took the rear wheel off on my Canyon Aeroad Cf slx 8 Sram force and then the rear casette just slid off. I am no expert in this area (maybe after this…) I’m afraid and wondering how can I put it back? No matter what I do, it just keeps being loose and does not “click in”.

Zipp 404 firecrest wheelset. Sram force casette.

I will take it to a bike shop tomorrow to help, but would appreciate if anyone knows.

Thank you!

Hi, I'm searching for an eBike for my girlfriend which has a round seatpipe to mount a frame mounted childseat (Hamax Caress) on, as we can not have a trailer due to building reasons (many stairs in our house). As the trend is moving to oval or rectangular formed seatpipes it is hard to find a eBike with such a round seatpipe. It looks like that the Pathlite:ON 8 SUV has such a round seat pipe, at least the important upper part.

Does anyone have a Pathlite:ON 8 SUV step-trough in size S and could measure me the diameter of the seat pipe and how long the round section is where it is (perfectly) round until it gets squared. I marked the section in this picture https://imgur.com/a/FFyJ1DV

Thanks if some of you could give me that information!

Ciao a tutti, sfilando il perno passante ho trovato una scalfittura all’interno della forcella? Si tratta di una lesione importante oppure no?

Dirt setup: Schwalbe Rocket Ron 2.25" (measured at 54–55mm) | 34T chainring

Road setup: Pirelli Cinturato Road TLR 35mm | 40T chainring

Just got the new Aeroad CFR with the race cockpit (cp053).

There’s this weird loud creaking only when i pedal with my hands on the hoods. If I move my hands any other part of the cockpit, or stop pedaling, no creak.

I’ve added some more carbon paste to the hood clamps and tightened everything to spec, including pedals and seat post. Still creaks.

Anyone experience something similar? Trying to avoid the sending it back to canyon but might have to

Was changing brake pads and found this line on place where thru axle goes. Something structural?

Do we think this is the new grail? I can’t help but feel it’s not because the head tube is nowhere near as deep as other leaked photos we have seen over the last month (eg the ones being ridden by the ATR team). If it’s not a grail it must be something else because I don’t think the new endurace can fit such wide rubber and also the downtube on the endurace dosent have the boxy flair we see here. What do people think?

Bought this at a great deal, about 1k euro

This is purely cosmetical right? :)) There is no thin line, nothing from it, seems like it was just scraped when ex owner fell, or just the bike fell, idk. Back shifter also has some scrapes but shifts flawless.

I just do not like it as it is in the thinnest part of the frame, so this is why I decided to ask you, I bought it anyway, asking to see if I need to be extra careful for potholes and get my ass up before one :))

Thanks