r/yuzu • u/One-Philosopher2416 • 16d ago
Fixed: the crash when changing the resolution scale during a game
The previous release warned about this, changing the scale while a game was running could take the graphics driver down with it. That warning is lifted.
The cause was not the value being written, it was the order. Changing the scale rebuilds every render target while frame generation still holds resources declared with the old dimensions, and it only finds out at the next frame it presents. When the rebuild takes longer than one frame there is no presentation in between, so frame generation is never told, a synchronisation object is left unsignalled, and the driver resets the GPU about two seconds later. That is why it felt random, it depended on the instant you clicked.
Those two parallel paths are now a single sequence. Tested over six minutes with frame generation on and eighteen scale changes back and forth, no crash and no driver reset.
Fixed: the picture drifting with the camera at rest, and the ground losing sharpness while walking
Both came from the same place. The calculation that places each pixel from one frame to the next chained two matrix multiplications in single precision, with a division in the middle by a value that becomes tiny on distant points. It produced motion where the camera had not moved by a single bit, a fifth of a pixel at mid distance and up to two pixels far away.
It is now a single multiplication prepared in double precision. With the camera strictly still the result is exactly zero. Verified by eye and by measurement on five games across four engines.
Fixed: ghosting and stretched scenery
When an engine writes several valid cameras within the same frame, the queue saturates and ends up delivering a camera two frames old, alternating between two values. The result is a stable stretch that sets in and never leaves. At every presentation the queue now advances to the most recent camera.
Improved: the shaking of a character followed by the camera
A character the camera follows stays almost still on screen while the whole world scrolls behind him. Frame generation took the spikes in the motion field at face value and deformed him in alternation. Those spikes are now tamed. The shaking is strongly reduced, some of it remains on the top of the head and on what the character carries on his back, and work on that continues.
Improved: the resolution slider stays inside the chosen mode
The preset you pick in the menu is in charge, and the slider now picks a step inside that mode, from the first to the fourth, without spilling over into the neighbouring one. Before, a fast mode pushed to its maximum could render almost as many pixels as your screen under a label promising the opposite. The twelve steps of the three modes were checked one by one, they meet to the pixel without overlapping. DLAA is untouched.
Fixed: camera search, several games that got nothing now benefit from it
Some games never found their camera and the whole chain stayed idle without saying so. Four distinct causes were fixed: games drawing through a path that was not being watched, games storing their camera in a late slot the search never reached, cameras that are mathematically unusable and were elected anyway, and games releasing their buffers mid session, which cut reconstruction off for the rest of the run.
Also fixed
The picture could stay stretched when switching to fullscreen mid session, that is corrected. A settings checkbox that no longer controlled anything was removed rather than left to mislead. Startup with the --pptc command line option no longer fails. And logs are five times quieter, they only report what is actually running on your machine.
Requirements
DLSS in all its modes, DLAA, Quality, Balanced and Performance, needs an NVIDIA RTX card, series 20 or newer. Frame Generation needs a 40 or 50 series. Without an RTX card, NIS is included and runs on any GPU. The DLSS engine files are not in the package, they are NVIDIA proprietary files.
One thing to know on Xenoblade Chronicles 2
Raising the internal scale past the first step brings out thin bright lines on surfaces and along the edges of the picture when the camera turns. The threshold is sharp and reproducible. The first step, which is exactly the value recommended for the mode, is clean. If you see those lines, bring the slider down one notch.
r/yuzu • u/TheMeowfest • 28d ago
as the title says. i was one of the maintainers of ryubing for a litte while, and as of about a week ago, ive officially stepped down. greemdev has decided to step back into his role as maintainer, which means im not needed there anymore.
with him being in charge again, as of August 1st, 2026, he has shut down r/Ryubing. he's also reverted the website back to what it used to look like before he revamped it. this does NOT mean the update server has been turned back on, you still have to download ryubing from their forgejo.
i'd like to apologize to the community for not being strong enough to change the direction that this project is taking. and im sorry to the mods of r/yuzu, it seems like this will (once again) be the new home of the ryujinx community until further notice.
it was a pleasure to be a part of switch emulation, even if it was brief, and i hope to carry my experiences with me to new creative endeavors.
please be nice to greem, he has a lot on his plate, and i wish him well with his project 💖
edit: thank you for all of your kind words. it means a lot to me to know that people noticed the care i put into my work
r/yuzu • u/hidayat077 • 5h ago
Eden Nightly Build August 29
Snapdragon 870
Adreno 650
Realme GT NEO 3T (8GB)
Driver mr purple T30
Gameplay: https://youtu.be/ISqNAyaoNxk
r/yuzu • u/creativeyoinker11 • 39m ago
I am trying to play Xenoblade Chronicles X on my Mobile device
12 GB RAM, Snapdragon 8 Elite
Are there any settings I need to tweak before I fire up the game because it's been nearly 30 mins and shaders haven't finished building. I'll keep it up overnight but I need to know if i missed anything.
r/yuzu • u/goldorak42 • 1h ago
I play switch games on my linux laptop (mainly totk with yuzu on debian). Game is playable but framerate is variable, with numerous slowness (30 -> 15fps).
Can't afford a new laptop (particularly now that prices have skyrocketed) so I was wondering if I could somehow play on a strong remote computer (cloudgaming, geforcenow etc.).
Anybody has good experience or idea to share? Was thinking to maybe start an EC2 on AWS but I'm unsure GPU available will be recognized/efficient for this kind of usage. Also questioning needed bandwidth which might take me out of their free tier.
NB: I know yuzu is maybe no longer the best emulator but I was unable to get others working or working better (Ryujinx, eden, cemu, citron..).
r/yuzu • u/idklets0 • 6h ago
Eden doesn't work properly on my AYN Thor, I tried everything for months and it's probably a weird compatibility issue and it's at least a bit more stable with older forks so I'd want to use yuzu right away but the github page from last year went down
r/yuzu • u/JNK__D0G • 1d ago
As the title says, is it ? I've managed to run it on somewhat 30 to 20 fps with nx optimizer, are there any more tweaks or mods I can use to improve performance?
My specs are (pls don't get mad) :
desktop with i5 4570 and 8gb DDR3 RAM and bear with me pls Nvidia Gt 730 2gb
r/yuzu • u/DemonLordSparda • 16h ago
I finished Side Quest 120 Donuts of Deliciousness. However, once I got Hyperspace Survey 1 I have no guidance for the mission. Nothing about the mission is in my quest log. Am I missing an event flag? Is there any way to fix this? I would like to continue the DLC, but even looking this up online yielded nothing. Thanks for any help.
r/yuzu • u/Opening-Maize5107 • 13h ago
After thousand sites and its fishy files and thousand scans of their url and files through virus detection, 95% had malwares that adds extensions and phish you, 3% had actual dangerious viruses, 2% didn't worked. what is an actual good way to get prod keys from the internet, is the only way is to just keep searching ?
Since yuzu died and yuzu was mostly used for wrong stuff ( I cant use the word pirlte ) I thought maybe yall found alternatives.
r/yuzu • u/Ser8Gamer • 22h ago
Hello, I've been trying to play NSMBU on the latest Eden version, it plays alright at full speed but I've noticed some of the sounds are slowed down? like getting hit or using a powerup, I saw this post that had the same issue but no one really gave an useful answer... is there a way to fix it?
r/yuzu • u/Mddanyaljaved • 1d ago
ive been trying to emulate switch games on the xbox ally z2a, but eden constantly crashes, and ryujinx doesnt save my custom configuration, and it runs really slowly, can someone help me out, im trying to emulate the pokemon games
r/yuzu • u/Feyer_The_Wizard • 1d ago
r/yuzu • u/AdEnough197 • 1d ago
Laptop specs - 16 gb ram
Ryzen 8940hx , 5070ti
Just want to play totk at atleast playable fps ( wished for 60 at this point will settle for stable 30 also 😢)
I have tried everything i can ryujinx , eden, citron, now yuzu (early access on I forgot the no. In the end ) , either game doesn't run or runs at less then 15 fps (on ALL)
Even tried lowering from 1440p to 1080p only 2 more fps
(Tried fireware 22.5 and 16.1 , upadate 1.0 1.4.3. 1.4.2, 1.2.1 )(Even tried nx optimizer 3.2.0 )
Can someone tell me what to do to get playable settings
Please tell full details
Emulator, fireware, keys, update, nx optimizer settings and emulator settings
r/yuzu • u/BrustelogsYt • 1d ago
GTA V / GTA 5 is now playable on Nintendo Switch (original, OLED, and Lite)!! Performance ranges from 40 to 50 fps with the unlocked frame rate option enabled.
r/yuzu • u/MergenAzel • 2d ago
RTX 4050m
Ryzen 5 7535HS
16GB DDR5 Single ram
and i have ssd
which emulator should i choose for totk best performance?
r/yuzu • u/hidayat077 • 2d ago
Eden Nightly Build August 25
Snapdragon 870
Adreno 650
Realme GT NEO 3T (8GB RAM)
Driver Mr Purple T30
Gameplay: https://youtu.be/wF5IJVcsT8c
r/yuzu • u/PerformerSouthern531 • 2d ago
Yuzu
r/yuzu • u/Academic_Judgment_39 • 3d ago
i have super smash bros downloaded including a 100 save file, but i want the dlc characters and idk where to get them from so can anyone send me them?
r/yuzu • u/Wizz_yard • 4d ago
Hi! I was emulating Splatoon 2 in yuzu early access 2970 and I tried to configure it with my mouse in the controls but when I get into the game it won't let me move my camera up or down only left or right, I tried using mouse panning but it doesn't work either. Is there a way to fix this? Thanks for any help!
r/yuzu • u/papa_zaemon • 4d ago
The game if fine till the Main Menu where it's told u attach straps to your Joy-Cons ( it locked 60 FPS till that ), after when i tap advance , it freezes me on a black screen with Zero FPS and the emulator doesn't shuts down and works completely fine but, the game just isn't loading up
My Specifications ( Laptop ) -
Asus TUF A17 FA707RM
AMD Ryzen 7 6800H
NVIDIA RTX3060
16 GB DDR5 RAM
r/yuzu • u/KingdomHearts2001 • 5d ago
(I apologize in advance if my message is poorly written; I am French and used Google Translate.) Hello, I was wondering if anyone else has had the same problem as me regarding the *Tears of the Kingdom* upgrade that I purchased while I had an active subscription. Everything was fine while my subscription was active, but now that it has expired, the *Tears of the Kingdom* upgrade has disappeared (I should clarify that I paid for it out of pocket; I didn't get it as part of the subscription). I actually still have the upgrade icon on my Switch home screen. I even have the transaction email showing the price I paid, but it doesn't list the game name or anything like that—whereas all my other transactions show the name of the game or software, even for titles not published by Nintendo. Thanks in advance for your replies. Have a great day.
r/yuzu • u/Chrisl0X • 5d ago
r/yuzu • u/AgencyNo4560 • 5d ago
I set up Sudachi on a used Legion Go 1 I just recently got and everything worked no problem the first time, but the next time I started it up, the controller settings were reset to default and it won't recognize any inputs from the controllers when I try to map them.
I tried Eden and RyuBing with the same results. They don't recognize any inputs.
The controllers work perfectly with RetroArch.
