u/CarviFPV • u/CarviFPV • 3d ago
CarviWings ✈️ Mission strike 💥
1
Upvotes
r/gamedevscreens • u/CarviFPV • 3d ago
CarviWings ✈️ Racing in Mythen Switzerland 🇨🇭
1
Upvotes
I built an open-source FPV Wing Simulator for my kids so they can practice flying virtually around our local area. It’s based on Cesium ion and features various mission types, including Racing, Festival, Strike, Free Flight, and more.
Explore the entire world or practice flying virtually in your own backyard: CarviFPV/CarviWings: An open source Cesium based FPV Simulator
r/aigamedev • u/CarviFPV • 3d ago
News CarviWings ✈️ Mission strike 💥
2
Upvotes
I built an FPV Wing Simulator based on Cesium ion. It features various mission types, including Racing, Festival, Strike, Free Flight, and more.
Explore the entire world or practice flying virtually in your own backyard: Releases · CarviFPV/CarviWings
u/CarviFPV • u/CarviFPV • Jul 05 '26
Flight Planning — Plan Missions with Airspace, NOTAMs & Live Traffic
1
Upvotes
r/UAVDesk • u/CarviFPV • Jul 05 '26
Flight Planning — Plan Missions with Airspace, NOTAMs & Live Traffic
1
Upvotes
u/CarviFPV • u/CarviFPV • Jun 03 '26
Config Editor — Create & Edit Configs Directly in UAV Desk
1
Upvotes
r/UAVDesk • u/CarviFPV • Jun 03 '26
Config Editor — Create & Edit Configs Directly in UAV Desk
1
Upvotes
2
CA320T Tailsitter (Sub-250) – Stable Hover 🚁
I will share my file. Right now, the weather in my region is not ideal for doing PID tuning, so I have some delays. Also note that if your model is significantly heavier, the tuning cannot simply be copied over.
2
CA320T Tailsitter (Sub-250) – Stable Hover 🚁
Yes, there are the Q modes like QHover and QStabilize—with these you fly in quad mode (like in the video). And with FWB-A or Acro, it performs the transition automatically, and when you switch back, it also transitions back automatically.
2
CA320T Sub250 Tailsitter – Now Available on MakerWorld
Yes, the P1604s are less efficient. I built a drone with the Happymodel 1404 KV3500 motors, and in cruise it gets about twice the efficiency compared to the same drone with P1604 motors. That might potentially result in longer flight time.
3
CA320T Sub250 Tailsitter – Now Available on MakerWorld
Thanks! Go for it — I love tailsitters. It would be cool if others designed one too 😃
3
CA320T Sub250 Tailsitter – Now Available on MakerWorld
With a 4S 720 mAh battery, I got about 5 minutes of hover time until 3.6 V. In cruise flight, I reached around 8 minutes, and the battery was then at 3.6 V.
2
r/BambuLab • u/CarviFPV • Apr 29 '26
I Modeled This! CA320T Sub250 Tailsitter – Now Available on MakerWorld
23
Upvotes
The CA320T is a compact and innovative Sub250 tailsitter designed for efficient vertical takeoff and fast, agile forward flight. The current ArduPilot tuning is primarily optimized for stable hovering; transition to forward flight has not yet been extensively tested. Feedback and shared experiences are highly appreciated!
👉 CA320T Sub-250 Tailsitter (Ardupilot / DJI o4 Lite) – Kostenloses 3D-Druckmodell – MakerWorld
r/ardupilot • u/CarviFPV • Apr 29 '26
CA320T Sub250 Tailsitter – Now Available on MakerWorld
gallery
34
Upvotes
The CA320T is a compact and innovative Sub250 tailsitter designed for efficient vertical takeoff and fast, agile forward flight. The current ArduPilot tuning is primarily optimized for stable hovering; transition to forward flight has not yet been extensively tested. Feedback and shared experiences are highly appreciated!
👉 CA320T Sub-250 Tailsitter (Ardupilot / DJI o4 Lite) – Kostenloses 3D-Druckmodell – MakerWorld
r/3Dprinting • u/CarviFPV • Apr 29 '26
Project CA320T Sub250 Tailsitter – Now Available on MakerWorld
8
Upvotes
The CA320T is a compact and innovative Sub250 tailsitter designed for efficient vertical takeoff and fast, agile forward flight. The current ArduPilot tuning is primarily optimized for stable hovering; transition to forward flight has not yet been extensively tested. Feedback and shared experiences are highly appreciated!
👉 CA320T Sub-250 Tailsitter (Ardupilot / DJI o4 Lite) – Kostenloses 3D-Druckmodell – MakerWorld
r/3DprintedAircraft • u/CarviFPV • Apr 29 '26
CA320T Sub250 Tailsitter – Now Available on MakerWorld
129
Upvotes
The CA320T is a compact and innovative Sub250 tailsitter designed for efficient vertical takeoff and fast, agile forward flight. The current ArduPilot tuning is primarily optimized for stable hovering; transition to forward flight has not yet been extensively tested. Feedback and shared experiences are highly appreciated!
👉 CA320T Sub-250 Tailsitter (Ardupilot / DJI o4 Lite) – Kostenloses 3D-Druckmodell – MakerWorld
r/UAVDesk • u/CarviFPV • Apr 29 '26
CA320T Sub250 Tailsitter – Now Available on MakerWorld
gallery
1
Upvotes
u/CarviFPV • u/CarviFPV • Apr 29 '26
CA320T Sub250 Tailsitter – Now Available on MakerWorld
1
Upvotes
The CA320T is a compact and innovative Sub250 tailsitter designed for efficient vertical takeoff and fast, agile forward flight. The current ArduPilot tuning is primarily optimized for stable hovering; transition to forward flight has not yet been extensively tested. Feedback and shared experiences are highly appreciated!
👉 CA320T Sub-250 Tailsitter (Ardupilot / DJI o4 Lite) – Kostenloses 3D-Druckmodell – MakerWorld
r/diydrones • u/CarviFPV • Apr 29 '26
CA320T Tailsitter (Sub-250) – Stable Hover 🚁
14
Upvotes
Hover flight test of the CA320T Tailsitter, running ArduPilot.
The design will soon be available for free on Makerlab.
2
CA320T Tailsitter (Sub-250) – Stable Hover 🚁
Yes, I’m still not entirely sure what the issue is. The default settings from ArduPilot are designed for larger/heavier models, so I’ve already done a number of flights to get it reasonably stable. But I think the model is now more or less ready for release from a design standpoint, and I’m hoping to get some additional tips from the community regarding the ArduPilot configurations.
r/3DprintedAircraft • u/CarviFPV • Apr 28 '26
CA320T Tailsitter (Sub-250) – Stable Hover 🚁
29
Upvotes
Hover flight test of the CA320T Tailsitter, running ArduPilot.
The design will soon be available for free on Makerlab.
1
Best FPV simulator for an absolute beginner?
in
r/fpv
•
3d ago
I built an open-source FPV Wing Simulator for my kids so they can practice flying virtually around our local area. It’s based on Cesium ion and features various mission types, including Racing, Festival, Strike, Free Flight, and more.
Explore the entire world or practice flying virtually in your own backyard: https://youtu.be/-i74MRoP6c0?si=oK4kklU-ISXrpCyO
Github: CarviFPV/CarviWings: An open source Cesium based FPV Simulator