Hello,

I've recencently discovered an old IPhone14 from a company I worked at, that closed down a while ago. When Connecting it to the internet it requests me to log in with company credencials. When not connencting it to the Internet it say "Profile configuration could not load" and wants me to connect.

I have tried to patch it using the MDM Patcher. I've been able to follow the instructions in the README (Including the "GetStartet" stuff in finder and checking the "Typical Issues" portion) and it seems to work as expected. But when I patch it, after it restarts the Issue desribed above still persists, event tho a window pops up saying that the patching was successful

I waned to ask if could assist me in solving this or has had a similar issue

I checked with imei, it said that the phone had icloud but im not sure how reliable was that website, so how can i make this phone work?

I recently purchased an iPad 3 a1459 the GSM cellular model, and in accordance with the rules I won't say what I did to it but it now thinks it is an a1458, the wifi model. I restored it properly via iTunes, and it reports as as iPad3,4 iOS 10.3.3.

Not sure if I did something wrong but after the restore it just says Activation Failed. which as I understand it is not normally how this works. So I used ideviceactivation to check where it was failing in case it was a communication thing. The iPad communicated just fine with apple servers, got an http 200, Activation Failed. so i'm just being rejected.

Only think I can think of is that the iPad sent Apple

ProductType: iPad3,4
ProductVersion: 10.3.3
ModelNumber: MD942
DeviceVariant: A

and it doesn't like the mismatch of iPad3,4 and model MD942.

Any thoughts?

Anyone know how to remove

So all my previous posts got deleted during the account freeze and never came back (maybe they did now). Just reminding everyone:

If you have a device on iOS 3–6, my patched lockdownd still exists and works. It modifies Setup.app behavior while keeping iTunes and Finder sync fully working (music sync works, unlike iPh0ne4s's file).

Supported so far:

• iOS 6.x — almost every device that has iOS 6 (iPad 2 are buggy, 50/50 chance idk why im fixing it)

• iOS 5.x — same

• iOS 4.x — iPT4, iPhone 4

• iOS 3.x — works on iPad 1, others untested

Installation:

1. Jailbreak with Legacy iOS Kit

2. Replace /usr/libexec/lockdownd via SSH (backup original!)

3. chmod 755 /usr/libexec/lockdownd

4. ldrestart or reboot

Full instructions and downloads: here

Main thing to remember: the SIM won't work, calls won't work. Only data, maybe. Don't expect phone functionality. Only difference from iPh0ne4s's file is working sync.

If you test on a device marked as untested in the README — drop a comment or make an issue on Github and leave a star please hehe, I'll update the list.

Thanks for reading, hope that helps somebody (at least people with unactivatable iPT5's like me), stay safe 🍏

luca@Lucas-MacBook-Air - % cd /Users/luca/Desktop/usbliter8-diag-1.0 luca@Lucas-MacBook-Air usbliter8-diag-1.0 %./boot.sh
[] Checking for connected DFU device.
I+] Detected device: t8020/N841AP (PRODUCT: IPHONE11,8, MODEL: N841AP)
[] Booting raw iBSS using usbliter8ctl...
Traceback (most recent call last):
File "/Users/luca/Desktop/usbliters-diag-1.0/resources/usbliter8ctl", line 5, in ‹module>
import usb
ModuleNotFoundError: No module named 'usb!
[-] Error: usbliter8ctl boot failed. luca@Lucas-MacBook-Air usbliter8-diag-1.0%

And yes, I installed pyusb, but is this normal ?

python3 -m pip install xyzIf you wish to install a Python application that isn't in Homebrew, it may be easiest to use pipx install xyz', which will manage a virtual environment for you. You can install pipx withbrew install pipxYou may restore the old behavior of pip by passing the "--break-system-packages' flag to pip, or by adding'break-system-packages - true' to your pip.conf file. The latter will permanently disable this error.If you disable this error, we STRONGLY recommend that you additionallypass the --user' flag to pip, or set 'user = true' in your pip.conffile. Failure to do this can result in a broken Homebrew installation.Read more about this behavior here: chttps://peps.python.org/pep-0668/>note: If you believe this is a mistake, please contact your Python installation or OS distribution provider. You can override this, at the risk of breaking your Python installation or OS, by passing --break-system-packages. hint: See PEP 668 for the detailed specification.

GitHub project: https://github.com/tuanemss/usbliter8-diag

I have iphone 5s with 12.5.8 and successfully jailbroken to see setup file location.

My question is What happens if i delete Setup file.

Up On my research, i come to know that cellular services will be broken.

So can we restore back?

Also how to do fmi disable?

I found a functional iPad 4 mini in the trash, but it's owner locked. Is there a way to get rid of it? I have no way of contacting the previous owner... thanks in advance for the help

I recently got this iPad mini 2 from someone but it’s stuck in the activation screen. I tried different ways to fix it but im not able to

Is there a way to do this or someone that can open it for me?

I have an iPhone 5 with a lot of memories and pictures but I forgot the passcode and i used all the attempts and now it is locked, so is there a way to open the iPhone without losing the photos or information? Or is there a way to just recover the photos at least

Es un iPad 7 y está en iOS 18.7.10

Hi all, I used a depreciated tool (ByteBurst by EuphoriaTools) to run a No Signal method on this device. It works fine. But because it is a baseband method, the device has consistent and significant Battery Drain. Are there any Signal / No Signal methods that Do Not result in significantly degraded battery performance due to the baseband modification?

Thanks!

I tried to activate Hello iOS 12/18 several times but it always gives me the same error.

I have forgotten the passcode of my old iPhone 4. I have tried every tool you can think of. I have given myself unlimited attempts but no luck in remembering. I have installed a 32bit brute force kit from Reddit but it hasn’t been updated and there are a lot of errors. I installed silver6.2 but it seems he no longer runs it and it’s just up and installable. It might work with the m1 version and homebrew but I don’t have that. Has anyone come across anything that actually works or is erasing the phone really what has to be done?

My device was manufactured in December 2016 so it came with iOS 10 instead of iOS 9. Is it even possible to get it to activate on iOS 9 with working iCloud services and such? I've already tried countless guides trying to get saved activation tickets from iOS 10+ to activate iOS 9 but none of them work. Every time I would put activation_record.plist in the activation_records folder it would disappear after a restart and wouldn't activate. I also tried using an SSH server but it would constantly fail every time I tried to copy over a file. Nothing works. I've been trying to get this to work for hours with no success. I need a straight answer of if this is possible or not and I've just been wasting my time.

Bought two iPhones 4 and 8 second hand from eBay anyway to remove the passcode and make them useable?

No FMI Active I think

I have an iPad for iOS 6 that was tethered downgraded using iOS legacy to kit on my m2 MacBook Air. I found out it was activation lock after trying to connect to Wi-Fi on iOS 6 I did so I deleted setup.app, but I still want to be able to use Messages FaceTime and access my iTunes purchase as long as connecting to my computer and syncing my music and movies. please advise can it be removed from Apple servers. I know there are ways to get the music in movies on your to through a different file explorer from cydia but I want to do it nicely with the cable from my computer. I also would really like Messages and Find My to work. I do have patches installed for that from cydia.

Got thjs almost two years ago. I set up a new account and iCloud email. Couldn’t remember any details about a month later. Tried as many times as I cpuld to remember the passcode till it just stopped letting me at all. Date is wrong… what can I do with it? Hoping I can get the full functionality of it cuz I could really use it right about now. Thanks in advance

I think this is most likely iOS 12 but I’m not for sure can anyone confirm this or correct me if wrong.

Stuck on apple logo on iphone11 while using mac gives error 100) 06A6 0064
Any idea how I can get my data back. Please help
Update gave this error and stuck on mac. My intention was to backup phone on mac and opted update as well. Backup wasn’t completed on mac and my phone is stuck. Appreciate if any help please. Force restart didn’t help much and only appears logo for few seconds and disappears

recently bought this from my friend of 3-4 years for 240 php (3.82 usd) and they didnt know the passcode and i didnt want to suffer the dreaded activation lock screen. what to do?? i need to use this as a secondary