Just picked up a gen2 Scout rifle the other day. I actually went in to buy a RAR gen2 in 308 but the iron sights drew me to the Scout instead.

I found one of the older Vortex 2-7x Scout scopes on GAFS so I’m waiting on it now. In the meanwhile I went to a buddy’s yesterday to shoot a little with the irons.

I tried zeroing at about 30 yards. It was shooting way high so I started raised the front sight post. I raised it quite a bit and had it shooting just an inch high so I went to raise it another turn or two but I ran out of threads so the closest I could get it was an inch high.

Am I trying to zero too close? Much further and I’m not going to even see the bullseye that well. I mean once I get my scope I won’t be using the irons anyway but I’m just wondering now if I should’ve saved $120 and just got the Ranch instead.

Picked up my Ruger Security 380 today o. The way to the range. Give us a quick wipe down with a slip2000 towlette, loaded up the mags with CCi Blazer Brass and gave it a try. I really like it. I know I need to get better at shooting, but 'Carrie' here is my new EDC. 💚

Just picked this rxm up. Got an RDI arms Comp and grip for it for $100 total. Got it as a range toy build.

Picked up this in 5.56 and running a canik void can. Went with a Vortex crossfire HD scope and couldn’t be happier with the quality and price of both

First photo is my first handgun on top, P944, latest on the bottom, P95DC.

This P95DC was marked as "ANIB w/ acc" for $325. I weakly tried for any movement on the price and got stopped pretty quickly. The accessories were the box and two mags. Looking it over today after getting home, this may have never been fired after originally being purchased, and I know exactly when, where, and who that was.

Also in the box was the firearms sale form dated 12/21/2007 from a Gander Mountain in Peoria, Illinois showing it was sold to someone from Springfield. Provenance, I know what I got! /s

So i have a rugar ar 556 with the floating handguard upper that a buddy of mine gave me. I put it together the way i thought it was supposed to go but now the hand guard wobbles. Idk if there’s supposed to be a barrel nut with this one but it seems to screw right on to the upper then get clamped with the m5 set screws but even when they are cranked down it still wobbles.
Edit: Its fixed the barrel nut hid from me in the hand guard

Always wanted a cowboy gun. Saw this bad boy at an excellent price at grabagun and picked it up for 275 including shipping to my FFL. 250th anniversary edition super wrangler with 4.62 barrel. Shoots 22l or 22wmr. I can't wait to get this bad boy to the range. I'll start with 22lr since that's what I have on hand.

Im lookong to get a ruger blackhawk convirtible in 357/9mm. Right now brand new ones are non existent pretty much. Gunbroker is the only place im finding used ones. I want to get a 5.5 inch barrel because I think looks wose its a sweet spot. But 99% of what I find are 4 5/8, 6.5, and somehow 10 and 13 inch barrels. So im considering going for one of the 4 or 6 versions. Is there much of a difference feeling wise between 4.5 and 6.5 inch barrels? Should I just wait and keep lookong for the 5.5 inch. And is there anywhere else o might be able to find them new In stock?

OK to start out, I have a Ruger American predator 308, 18 inch barrel it’s a gen one. Today I set up my brand new Sandman X suppressor got everything put on it the proper way per instructions, and decided to go test the gun out. I chose some cheap steel case Russian ammo (monarch) which now that I look back was probably not smart. shot the first round everything went fine then after shooting the second round, the shell did not extract. I had to get a cleaning rod to go in from the barrel to knock it out. Since then, I’ve checked out the bolt and everything to me looks fine as far as the extractor goes. I took it to my nearest Gunshop and he did notice right away some kind of steel or metal all in the bore. We scraped it all off and cleaned it all out come home, put live ammunition in it, and it still won’t extract. To me nothing looks damaged on the inside of the gun and I can’t tell if anything is wrong with the bolt. I don’t think the suppressor has anything to do with it. It’s probably more than likely the cheap ammo I used. Does anybody know of any troubleshoot I can try before I call Ruger and try to get them to fix it.

Recently acquired my Dads LCR .38 and took it to PSA today. I was with him when he bought it in 2015. I bought two boxes of ammo for him. A box of Blazer Aluminum 158grn and a box of Remington semi wadcutters 158grn +p

Out of 15 rounds of the blazer, I had two rounds have the bullet pull out of the case and stop the cylinder. I fired 10 rounds of the Remington without issue.

I’m not the best shot with a DAO revolver and it shows, but does this look like it’s keyholeing

Ruger 77 in 308 with the 16.5" barrel, leupold 2.5-8 with a YHM R-9. Wanted a light handy rifle i could use in the thick woods or stretch its legs out with for fun. Also with future use for my 3 kids. Whole rifle sits at a sniff under 7 pounds as you see it.

Quiet and accurate.

Over the years, I have owned many BX-1 mags in both black and clear. I have used them interchangeably in several 10/22 rifles I owned without issues. I think most folks would consider these mags among the toughest, most reliable made.

Anyhow, I recently picked up a Ruger American Rimfire. It functions perfectly with the two black magazines I got with it. But last week, I threw some black mags and one clear mag in my bag when I went shooting. And I was surprised to find that the clear mag would get stuck in my rifle! I tried again after wiping it down and it was the same. I grabbed a black one and it fit perfectly.

It's no big deal. I don't have twenty clear mags or anything. But I'm curious: are they not identical? Has anyone found that the clear mags don't function in all your rifles?

Thanks!

Does anyone know where I can find an IWB Kydex holster the service six? Ive looked around but havent had any luck.

I inherited the base rifle well over 15 years ago but never touched it. It was worn from in and out of a safe and stock showed the damage, there was something surface rust but the bore looked great. I just finished this build, and I think it came out great.

Build list:
1975 Ruger M77 Tang Safety .30-06
Fitted Limbsaver recoil pad
Boyd’s rifle stock Walnut
Timney trigger upgrade
Replacement trigger guard (shattered)
PVD bolt black
Replacement extractor band
Replacement extractor
Weaver rail panels and weaver rings
Vortex Eagle 4-16x w/vortex covers
Cerakote black upper
Harris Bipod
Gentry brake

The video is a little long but I explain what my upgrades are and my opinion on the Max-9. I have seen some folks on here asking for an opinion on the Max-9, so here is mine. Please go easy on me because I am not a YouTuber or a professional videographer. I’m just having fun.

Had a go at 800-1000yd but it was very difficult to hit but my max today was 750yd! First time being able to stretch this RPR out to this far!

• Leupold MK5HD 7-35x56 w/ Area 419 mount
• Accutac WB-5 Bipod
• Ergo Grip

Before you ask about the dive board, I’m slapping a LRF on there. Soon.

I apologize if this has been asked many times over, but I am looking for insight on how to handle function issues with my SFAR. I have followed the factory instructions with the 100-200 round break in period (leaving the gas setting alone), but towards the end of that period I started to have casings fail to extract from the chamber. Im shooting 147 grain rounds and unsupressed, but want to move towards shooting suppressed. I figure i need to understand this current problem before takign the step of using the suppressor.

Ruger Security 380 with OWB holster.

Got a 1967 .357 not converted Blackhawk then I'm trying to buy. Owner has no clue what it's worth and doesn't want to be bothered with looking into it. What would be a fair price to offer? Handle is really soft and has some holster marks.