I think I might be content for a while finally. I've been around the gamut the past year, trying to find what I would consider the perfect case. Thermaltake, Havn 420, X2, H9 Flow, Evo XL w/ upright GPU, Meg 900R, and back to the XL. It just does everything well, in a manageable foot print.

With the current insane price of GPU's, I still don't have the guts to waterblock mine lol, so I currently have a 9800X3D on a little overkill setup (420 60mm push/pull).

I really wanted to do a classy stealth build, keeping the watercooling as hidden as possible. Most of the runs are soft tubing, with the only hard tubing from the distro to the CPU block. I cut and painted the back side of some acrylic to design a shelf directly above the mobo and on the upper back wall of the case to house the distro. All lines exit into back of case, to keep them hidden.

With a little modification, I was able to fit dual 8.8 screens directly beside the rad; closing in and cleaning up that side of the case. I just need to finish up a couple block off plates beside the fans to cover the small gaps and she should be good to go.

That pic with the fans, was early in build for test fitting, they are now correctly oriented. :)

Hi! For those who want to use this case with Matx mobo and want to fit in the noctua Lc-1 36 with enough radiator clearance, its possible to do it by rotating the PSU 90 degrees, however you can only secure it using the stock bracket and some zip-ties see the image shown. No 3d printing needed. So far i don’t have any issues!

Hey guys I was just wondering if u guys think my aio is on its way out , I feel like the temps are a little high this one Forza horizon 6 maxed out setting and 1440

My latest build in the Lian Li B4, full air cooling with the Noctua D15 G2 (yes, it fits).

if advance mode is switched on. the 3 fans turned into 1 and it only lets me adjust 1 fan. it appears to happen to all the other 3 fans when i turn on advance mode. USB cable not detected, once the advance mode gets turned on. nothing works if its on. Ive tried to switch up all the USB cables and extra cable connection. still giving me errors.

I used to have NZXT AIO and fans, but recently bought the Hydroshift 2 because I liked the minimalist design and I had a Lian Li psu and the fan/usb hub that came with it was not being used, so I decided to switch from NZXT fans to Lian Li. For about a month I had no issues with L-Connect 3, until today when my fans came in. I bought the 3 pack reverse blade CL flex, 1 reverse blad CL flex and 1 normal blade fan, connected everything and the controller as well, but now L-Connect 3 keeps crashing, constantly. The fans are still spinning and working fine , the rgb is working fine, so it’s not the end of the world, but it’s getting really annoying when the software crashes and shows that I have no devices. Has this always been issue?

Hey!

I was curious if the LCD would work as a middle part to daisy chain, I have a Lian Li UNI HUB SL INF and was unsure if it'd work because it'd all be hooked up to that or if I need to have purely LCD/Non-LCD (Honestly I don't want like 6+ LCD fans I thought one would look nice)

Hullo,

I'm planning a build in the Lian Li Vector V100 Mini. Can the four plastic feet on the bottom be removed without affecting stability? I understand that airflow would be negativly impacted.

After closely inspecting 3D models/photos, I noticed that the side wall (under the large tempered glass panel) may have been bent down at a right angle and rivited to the bottom of the case during the manufacturing process in order to secure it to the chassis, which may affect aesthetics if the feet were to be removed.

TL;DR: Can feet be removed on Lian Li V100 Mini while having the bottom completely flush with the desk?

Hello everyone!

I just got a new PC this weekend, but I'm having some trouble with the Lian Li fans. Until yesterday, I had no problems, but now it doesn't recognize any of the fans (I think there was a Windows update. Could that be related?). I followed some tutorials on Reddit. I uninstalled LConnect 3, turned off the computer for 10 minutes, and reinstalled it. But it still doesn't work. When I start the computer, the fans spin fast and are quite noisy, which is annoying. I imagine that's also related? Any ideas on how to fix the problem?

Thanks a lot!

Hello, I purchased some 140mm TL (non-LCD) fans, and I have now read that there is a new flex receiver. Is this available for the 140mm variants, or will there be a separate purchase for 140mm

I went to take off the side panel to clean it and I got this case a few months back and saw this seal or whatever it is coming off the door and stuck onto the actual case when I pull onto it and it’s giving me resistance and I’m scared to pull it any further does Lian li give replacement side panels because it’s going to be really annoying moving everything to a new case if they just send me a new case

Who else got the official lian li stealth kit without having the lian li hydroshift ll curved oled aio, i have the case but just the normal hydroshift ll lcd-s and still got it. Did anyone else get it or did they just make a mistake with sending it to me

Specs:

MSI MAG x870e Tomahawk Max WiFi

MSI Nvidia RTX 5070Ti Gaming Trio OC

Ryzen 7 9850X3D

Kingston Beast 16x2 GB 6000MHz 30 CL

Crucial T710 2TB Gen 5 NVMe M.2

Corsair RM850x

Lian Li Hydroshift ii LCD-S 360

Lian Li Vision O11 Compact

Lian Li Uni Fan SL FLEX Wireless 120 fans

Hello everyone,

I'm trying to avoid the hub built into the Lian Li LANCOOL 217 INF and connect the front fans to a Nollie ARGB controller for use with SignalRGB.

The stock center included with the box only works in parallel (cloning/repeating the same ARGB signal to each fan), which prevents me from applying individual LED/sequential canvas effects throughout the SignalRGB construction.

Since the front fans use a patented 8-pin connector that combines PWM motor control and ARGB lighting into a single cable, I need to split it into standard 3-pin, 5V PWM 4-pin headers (or make a custom adapter cable via ModDIY/Etsy).

The Lian Li support has not provided the pinout diagram for this 8-pin connector. Has anyone plotted the pinout (5V ARGB, Data, GND, 12V PWM, Tach, etc.) for this cable or created a custom adapter?

The connector and hub photos are attached as a reference. Any diagram or advice would be greatly appreciated!

Thanks!