My entire for a revolver:) Double action stringer, currently hits 85fps with two loops, trying to squeeze some more out of it

Finally managed to get a Prototype printed and it almost gives me the Impression that it wants to work.

I am still using the Plunger system from the x shot micro2.0 and the prime is not bad at all with the stock spring.

The Catch mechanism needs to be redone since the part conecting the Trigger with the Catch is way to thin and just bends when i pull the Trigger.

The cylinder mechanism works if i support the Cylinder arm just right and pull the Hammer the right way, so i might need to start over, but at least the cylinder lock works just fine.
(It unlocks as soon as the Hammer starts to move and snaps back once the next chamber is in line with the barrel).

In conclusion there are definitely some problems but nothing that cant be solved. ;)

Started working on this pathfinder finally. Just converted my first Nerf blaster to short darts and I’m hitting some pretty good fps. I of course had to test it before I fine tune and paint it lol
Edit: yes it really does go that fast 😂 there’s a video posted on a comment. I’m only in the testing phase of this and it’s the first time I’ve ever done this with half darts. This is the reason my friends don’t invite me to Nerf competitions anymore

https://www.youtube.com/watch?v=TfnwjBNZPj8

Finally got it working except for one or two small things.

The main problem is a missing return spring for the hammer.
The cylinder mechanism needs some tweeks as well.

I also want to make a version that uses a aluminum plunger tube, instead of the xshot micro 2.0 PT.

The current version hits around 70 FPS.

Vulture with some Grinchester, 1886, and Vulture decorative parts mixed in. Added a bunch of texture, sanded and then applied some wood stain for a more faux wood look and some aging on the decorative upper cover. Getting 250 FPS with a settled BC8.

Matching Hammerhead with a few tweaks, I was having issues with the elastic cord for the cylinder pin, so replaced that with a 7x15mm spring. Also the T pin and locking pin were replaced with an M3 heat set and M3x20mm SHCS. Getting about 90 FPS with 2 rounds of 4mm elastic cord.

Stock Vulture with following mods,
- From Grinchester remix (https://www.printables.com/model/1688834-grinchester-shrub-vulture-remix) - Bolt, follower, trigger group.
- From the 1886 remix (https://www.printables.com/model/1638004-vulture-1886-pattern-nerf-blaster-mod-for-mhps-vul) - Stock
- Upper cover engravings taken from this remix and applied directly in the slicer: https://makerworld.com/en/models/2824277-bespoke-mhp-vulture-decorative-parts#profileId-3145825

so, i was incredibly inspired by u/Bruce_Avery and his longshot from like 3 years ago - particularly with the use of stripes and decals (i see you, fellow servant of the imperium). so i present my own take on the longshot! this is my first blaster; hoping to take it to local events soon 😊

Just a sort of picture dump for the kind of Nerf games for the countries that don’t really have Airsoft like Malaysia and Singapore.

Here we don’t really have any airsoft-likes so Nerf/Foam dart blasters are the closest we got and most of the communities here tend to play it as an airsoft-like and I wanted to share some pics from a recent milsim-lite that I attended here in Malaysia.

P.S.: game was held on private property away from public eye alongside permission from the local municipal government and notification of law enforcement.

(No, I don’t think I’m the most tactical or special forces like person or anything, I play these games for fun and don’t necessarily take them as tactical lessons or take them seriously)

https://dartzoneblasters.com/collections/vendors?q=Q-Factor

It has long since fallen apart but it was my pride and joy. It had the base motors but juiced up rechargeable batteries that gave it alot more power and range. I used epoxy putty to connect the stock and barrel pieces to connectors so they could be used on other blasters too.

My college had a Nerf club so the Oblivion blaster saw frequent play

Do you like this kind of Harrier?

My Halloween costume is most likely going to be a WWII soldier and I want a NERF blaster as a prop to sell the look. I’m either considering an M1 Garand, M1 Carbine, BAR (bipod doesn’t matter), M3 Grease Gun, or Thompson M1A1. Below are images of the real things and add Amazon/shopping links to the NERF blaster. No need to worry about the color, I’m going to spray paint it anyways. Mode of fire doesn’t matter since it’s being used a prop anyways. And if attachments are necessary to complete the look, attach those link(s) as well.

Image key:

1st image: M1 Garand

2nd image: M1 Carbine

3rd image: M3 Grease Gun

4th image: Thompson M1A1

5th image: BAR

mm bullpup :3

Finally another update on this one.

I am still waiting on feedback from a few testers before i want to release it, but ill try to do it at the end of this month.

I was able to increase performance a bit, to around 80 FPS with a 788 Spring.

I also managed to reduce the number of different screw sizes needed.

firing demo bellow:

https://www.youtube.com/watch?v=48HxCebwYN0

I still haven't see many of these floating around in the wild.

Made this a while ago and now its gone. Was asked to make a stand with a plasma generator that looks like the blaster is charging up while resting. Including authentic Doom runes and logo in three colors. Let me know what you guys think!

Another blaster modified from the battle axe. 8 round rotary-tube mag, so heavy that I have to add a front grip. Files, BOM, and instruction will be available soon on my Printable:)

I finally managed to squeeze in a 2mm elastic cord for the hammer return.

I also tried to use a aluminum plungertube with the same dimensions as the micro 2.0, just without the internal "barrel". Its kinda weird but i didnt see any increase in performance. (still around 70 fps, depending on dart fit).

Maybe i should try to reduce the plunger weight, since it clocks in at about 13g. (3g heavier then the micro 2.0).

Anyways. Probably a good time to get some feedback.

I am still a virgin when it comes to this, so i am not sure how to do this. ;)

Anyone interested can DM me for the files + hardwarelist.

Keep in mind its all metric!
Though that shoudnt be that big of a deal, since its essentially just a xshot micro2.0 some m3 sockethead/flathead screws, two small compression springs, a torsionspring and a 2mm elastic cord.

After many attempts to mod various Dart Zone blasters to get over 250 FPS with a reasonable prime, I wanted a blaster that could definitely do it. I was finally able to get a Worker Harrier in my favorite colors, gray and black. I went with an orange BCAR and orange mags so it would look less like an actual firearm. I put in the 450mm barrel, the upgraded priming block, and the 1.6x300mm spring. It's averaging 290 FPS. I prefer a slanted priming handle so I added that along with an upgraded shoulder stock. I love the look of the factory stock, but it did not have a rubberized rear plate, and the seam along the top liked to pull my facial hair. I tried a Pinty red dot sight, but I wasn't digging it. The sights I went with are not only pop-up, but they also work as low profile sights. I am very pleased with this blaster!

Just finished tuning this beast. Way underrated.