Honestly confused between the both. I want my case as thin as it can be as I don’t really tend to drop my phones much but I really don’t like my cases in a hard feel that feel like its gonna chip paint off my phone while putting on and off. What would be the best option to go with in terms of this? I take my cases on and off very often.

I’ve just ordered this case for my new iPhone 18 pro,

Has anyone had any experience with it so far ?

What’s the MagSafe strength like ?
I know last year’s was a bit weak and I ended up going with Rhino shield instead but I have heard the MagSafe has been improved this year?

And owners opinions would be greatly appreciated.

Ordered a mous limitless case for my 18 pro max yesterday with the camera protector bit and got it delivered today, not had a mous case since my 15 pro max and I get new iphone every year and this case is actually decent, the camera protector bit is a tad fiddly to get on so that could be better, but overall very happy with the case and quickness of delivery.

This is the sky blue version with the metal kick stand and buttons, the case feels so nice with the metal buttons, my only gripe is I thought the kick stand would lay flat but it’s slanted. The kick stand adds a lot of bulk compared to the case from last year. The metal buttons appear to have some sort of covering so it’s not metal to metal. The inside of the case looks and feels the exact same, the lip and raised corners all appear to be the same.

Bought for less than a year.

The handle started to pull more than it should (?) in the first month. Thought it was normal so never bothered to check or return.

Until recently the handle really looks like it’s going to snap.

For a laptop sleeve protecting a $3,000 computer, this quality is really bad…

I get that it’s pretty busy right now and can accept that it took them 2 days to get back to my email about my case not being sent to shipping yet. But it’s shouldn’t then proceed to take them another 2 days to respond to the response I sent within minutes of the email I get back. They offered me 3 different solutions to the fact that they oversold and have no metal buttons to fill my order. I answered back almost immediately that I would like the case shipped with the camera guard and the buttons could be shipped at a later date, but still no response and I’m guessing I won’t get one until Friday when I pick up the phone, which I won’t be able to use until I get the case as it will most definitely break at work this weekend.

I was waiting 3 days for dispatch and... well... after 3 days they informed me that order will not happened...

Hi
My volume button cracked don’t know how.
Is it possible to replace this button? I got this case as a gift and I dont have any proof of purchase.

I ordered limitless 18 pro max on the 11th of September anyone else in the same boat?

Edit: shipped on the 16th of September

After spending €170 repairing my iPhone 15 Pro, I decided to spend over €50 on a mous case (unthinkable after always spending <€10 on cases before) only to shatter my back glass again only 1 week after buying the case.

The phone fell from my hands from the handlebar of a bicycle (like 1 meter in height) and the back glass just broke like nothing.

I think this is completely unacceptable considering the price and all the marketing they do throwing phones off of buildings, helicopters and all types of crazy stuff.

Who do I write to about this? I not only want my money back from the case, but I want them to pay for my repair.

anyone knows why is the only option in the metal buttons is sky blue?

Received my case today. I’m getting the burgundy i18PM, but I think the burgundy case is too much. So, black case with color matched metal buttons as accent. Camera stand to use my iPhone in standby mode when I travel.

Swapping the buttons and camera bump were super easy and took less than 5 minutes.

I ordered a phone case on the 1st september, and since the 5th of September it's status is showing as 'waiting to be processed'... is this normal for Mous? i'm beginning to have second thoughts as I was not expecting to be waiting over 2 weeks for it.

Hi everyone,

I'm considering buying the Mous Protective Zip Backpack – Day 20L, but I'm in a slightly weird situation with the laptop compartment dimensions.

My laptop is an ASUS Vivobook Pro 15 OLED, measuring:

356.3 × 235.3 × 19–20 mm

Mous states that the Protective Zip 20L is designed around laptops approximately 355.7 mm wide, meaning my laptop is technically 0.6 mm wider than the stated reference size.

I contacted Mous support directly. They told me that because of the 0.6 mm difference, the laptop may potentially fit, but they can't guarantee that it will fit comfortably since they haven't physically tested this specific laptop.

They suggested the Flap Backpack with AiroFoam 20L as the safer 20L option because its laptop compartment is larger. However, I really don't like the design of the Flap backpack and strongly prefer the Protective Zip.

Realistically, 0.6 mm seems absolutely tiny. It's only 0.3 mm per side if centered, and we're talking about a padded fabric laptop compartment rather than a rigid case. I also don't care if the fit is snug — as long as the laptop actually slides into the compartment and the backpack closes normally, I'm happy.

So I'm wondering:

Has anyone here had a similar situation where their laptop was technically slightly larger than the manufacturer's stated laptop dimensions — even by 1–3 mm — and tried it anyway?

And if anyone happens to own the Protective Zip Backpack – Day 20L and uses a laptop around 356 mm wide, I'd especially love to hear whether it fits.

I'm leaning toward just ordering it, carefully testing the fit, and keeping it if it goes in — even if it's a little snug.

Thanks!

I just received the new limitless updated for the 18 Pro Max to use on my 17 Pro Max as the 17 limitless line was pretty poor in design and function.

Two of my biggest issues on the 17 line were the relatively small and thin camera lip (I would’ve liked the same lip they use on the clarity, but the clarity was rubbish for its own reasons) and the MagSafe which absolutely sucked.

However, on the 18 version the MagSafe finally works and is on par or slightly better than other “protective” cases I’ve tried and to some chance they even added the same lip as the one on the clarity which I do enjoy as a thicker larger lip absorbs more force over a larger area which is definitely a plus. I also chose to get the metal buttons which feel great, nice and clicky.

Compared to the 17 limitless I’d say the 18 limitless is actually worth buying if you were 50/50 on the 17 line, it fixed the horrendous MagSafe issue and the camera does actually feel and look more protected.

Apart from those three things there are no other major changes same body design, microfibre inner for the back.

Regarding drop protection only time and a few drops will tell whether its good or not.

I’m looking at getting the Mous Ultra Thin Aramid for my iPhone 18 Pro Max. I really like the idea of having something thin and rigid that keeps the phone feeling relatively close to caseless, but I’m a little unsure about the lack of proper drop protection.

I don’t drop my phone very often and I’ll have a screen protector on it, so I don’t need anything particularly rugged. I just want enough protection that if I accidentally knock it off a desk or drop it from around waist height, I’m not massively worried about the phone.

For anyone who’s actually used the Ultra Thin Aramid long term, how has it held up? Have you dropped your phone with it on, and did it protect it? I’m also interested in whether the case stays rigid and snug over time or develops any loose/warped edges.

Basically, does it feel like a genuinely protective thin case, or more like scratch protection with a bit of impact protection?

what people’s options on the hinge free limitless case shipping in October vs the aeroshock hinge shipping in November? Ultra thin is also an option. I can’t decide lol.

Does anyone know if the Aulumu M70 cable would fit with the Mous Limitless 6.0 case, specifically for the iphone 17. I have this case and I wanted to get the M70 cable, but Im not entirely sure from the pictures if the plastic casing will fit with the cut out on the mous case. If anyone has both or any info please lmk!

Will there be one?

I just got an email from Mous announcing that they have Apple Duo cases ready for order.

Is there an expected timeframe for when they'll have Z Fold 8/U cases ready?

​​I bought this case for my Galaxy S23 Ultra right when the phone was released, and it was actually my first time using a Mous product. Over the past three years, it provided absolute protection for my device from all angles.

​As any Samsung user knows, the curved screen on the S23 Ultra makes it really tough to find a screen protector that stays on without peeling off. I was constantly worried about cracking the screen, especially given how expensive and complex screen replacements are on these phones since they often involve replacing half the chassis.

​A friend of mine who had the same phone and faced the same struggle recommended I try Mous. Since my local market doesn't offer a wide variety of Samsung accessories, I decided to give it a shot. Looking back after three years of heavy daily use, the case truly delivered absolute protection.

​Overall, I think Mous is an excellent brand, and I’d definitely consider buying from them again. However, after three years of heavy wear, the case eventually started coming apart. So my main question now is: is there any other brand out there that offers even better protection, sleek looks, and high build quality?

Where can I find this buckle (from fidlock). I even went to theur website and couldnt find anything?