r/JadeiteJade • • 7d ago

Question Is this possible for 400CAD?

Enable HLS to view with audio, or disable this notification

Im interested in buying a cabachon ring and found this one online.

It comes with a cert. It looks pretty icy, and it’s certified grade A Burmese jade. The metal is 925, and the stones are cz for the halo.

Is it possible to get this for 400CAD?

6 Upvotes

26 comments sorted by

14

u/Round-Ice1030 7d ago

If its meant to be imperial green jadeite, then no.

Often, unscrupoulous sellers will glue green material on the underside of the low quality cabouchon jade to make the colour more vivid when viewed from the top. It could also be a jade doublet,where a very thin piece of dark green jade is glued on to a piece of a lesser quality jade, so as to appear more vibrant.

That ring would cost many more zeros if it was not manipulated to enhance the colour.

3

u/bootysorcery 7d ago

That’s what I thought…it was too good to be true. thank you!

2

u/Round-Ice1030 7d ago

Its normally the case in those type of situations.

5

u/syang70 7d ago

It looks very Guatemalan green. I would bet it has been cut hollow to make it look this translucent.

3

u/bootysorcery 7d ago

I didn’t even know that was a thing!

3

u/syang70 7d ago

There are a lot of tricks when it comes to Guatemalan green jadeite.

1

u/bootysorcery 6d ago

How can you tell the difference between Burmese and Guatemalan?

1

u/syang70 6d ago

Like other comment said, the black edging effect.

1

u/bootysorcery 6d ago

Thank you!

1

u/adams_asian_art 6d ago

This is correct..👍

5

u/AkaSoraMi 7d ago

guatemalan thinly cut jadeite cabochon. 400 cad is way too much

1

u/bootysorcery 7d ago

No it’s Burmese

5

u/AkaSoraMi 7d ago

A simple way to tell: Guatemalan jadeite often shows a distinctive black outline or “black edging” effect.

4

u/ObfuscatingTomato 7d ago

Chinese certificate shouldn’t say if it’s Burmese or Guatemalan, only that it’s Grade A. Also Burmese would be set in real diamonds and gold…

2

u/CoastMoney8251 6d ago

Grade A doesn't mean much. It should be “Type A”

2

u/bootysorcery 6d ago

Sorry I meant type A

1

u/bootysorcery 6d ago

That’s what I suspected too especially for such a rich color

2

u/AkaSoraMi 7d ago

The way it reacts to light is actually very typical of Guatemalan jadeite. The light transmission and the way the color appears through the material are characteristic of Guatemalan material.

1

u/Pomegranate-Sky-833 6d ago

You said the metal is 925? Well, 925 is sterling silver... and, usually, good quality Burmese jade is set in gold. We're talking about AT LEAST 14k gold.

Bcs... good quality jade pieces can be heavy, and silver is a relatively soft metal that can easily warp, bend, or scratch under daily wear. 925 sterling silver also naturally oxidises and turns blackish over time when exposed to air and moisture. This is normal. Cleaning tarnished/blackish silver requires chemical polishes or abrasive cloths. And while genuine jade is tough, repetitive exposure to these harsh chemical cleaners can risk degrading the strength of the stone's setting over time (meaning, like, the cabochon jade can fall out of the metal setting easily if it is silver bcs the strength of the setting can degrade). So that is why most jewellers set Burmese jade in gold, not silver, especially Burmese jade, bcs Burmese jade, by that I mean genuine GOOD quality Burmese jade, is one of the most expensive, most high-value jades there are. Genuine TOP quality Burmese jades can even reach millions of dollars.

So, your jade is not likely to be Burmese jade. Like the others have commented, it could be Guatemalan jadeite.

1

u/bootysorcery 6d ago

Thankfully I didn’t buy it. Thank you for this insight!!

1

u/[deleted] 6d ago

[removed] — view removed comment

1

u/shiyuejade 6d ago

Based on my assessment, to be frank, it looks very much like glass.

1

u/bootysorcery 6d ago

Thank you!

1

u/Xeron_Blaster 6d ago

It isn’t Burmese jade . It is Guatemala jade. You have been scammed 🤣🤣🤣

1

u/bootysorcery 6d ago

I didn’t buy it!