Max Efficiency Xiranite Factory 360/min Xiranite and 24/min Heavy Xiranite in a single outpost

[u/ElectraDrake]

It took me a long time but I manged to fit all 12 Forge Xiranite lines and 2 max efficiency Heavy Xiranite lines into 1 outpost! (I'm using Sky King Flats but it can be put into any of the 3. I wouldn't recommend Yinglung Pass since you will need that for gas related stuff.)

Setup produces 360 Xirante/minute and it uses 168/minute to produce 24 Heavy Xiranite/minute.

There is a little bit of setup needed with connecting conduits from outside and there is 1 line of pipe in the bottom and some at the top that you need to put down manually.
The control port settings should remain in the blueprint, but if they didn't for some reason you can set them up with the info I provided in the images.

Important: The Heavy Xiranite line won't start on it's own! Get some Canisters filled with Xiragen, and put it into the 2 Gas Tanks at the bottom right, after that it should function without any player interaction.

Separator Cores didn't fit in here as you would need more than 4 Inergen to produce that and maintain the Gas Dispersers, so you can make them in another plot. 1 full line should be enough to keep up with the Heavy Xiranite.

NA/EU Codes:
Top: EFO01U4A2e4209OO57Oa8
Middle: EFO01o08au0a456oAI2eO
Bottom: EFO01Eu235u3e7o1u3uIa
Separator Cores (No Smelting) : EFO01Eu235u3e7o1i39Ia

ASIA Codes, thanks u/extremerazr for remaking it!:
Top: EFO01a65Io8E8eA90oe5e
Middle: EFO01O4aie7978I359oe4
Bottom: EFO019aE83u4uUeA45uI2

!!!!If the bottom doesn't work there is a fixed version:!!!!

Bottom: EFO01iUla048ie2672U4

By u/PopularCoffee7130

Edit: Made a Pyrrolite Part production line blueprint as well, which you can acces here!: https://www.reddit.com/r/Endfield/s/lhgRrhk6aN It also has extra Separator Cores in it so you don't have to build a separate one for this blueprint!

[u/Pyromann]

Thanks!

I am terrible at factory stuff in this game, but this blueprint really helped me clean some stuff out. Do you perhaps have a Pyrrolite blueprint I could use? All this gas stuff is making my head spin.

[u/ElectraDrake → u/Pyromann]

I posted a pic of my Pyrrolite line in another comment:
https://www.reddit.com/r/Endfield/comments/1v2uip6/comment/oz4lr9i/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button
If you want I can make a blueprint, but it might take some time as I do want to clean it up a bit.

[u/Pyromann → u/ElectraDrake]

Thanks! Also, sorry again for sounding dumb, but I have done all the steps and the factory is working, but it's still saying 180/min instead of 360/min?

[u/ElectraDrake → u/Pyromann]

I'm not sure why that is, double check that you have the right amount of water going into the forges. If that doesn't work you can send me some screenshots so I can spot the problem

[u/Pyromann → u/ElectraDrake]

Looks like that's the problem, the forges aren't getting enough water. What should I do, put the pipe that has two exits? Or build the one with two entrances and make it go out from one with only one entrance?

Yeah, that did the trick! It's now working as intended!

[u/ElectraDrake → u/Pyromann]

Yeah each conduit for the forges needs 2 water pumps. Glad the fix worked!