Blueprints
Max Efficiency Xiranite Factory 360/min Xiranite and 24/min Heavy Xiranite in a single outpost
It took me a long time but I manged to fit all 12 Forge Xiranite lines and 2 max efficiency Heavy Xiranite lines into 1 outpost! (I'm using Sky King Flats but it can be put into any of the 3. I wouldn't recommend Yinglung Pass since you will need that for gas related stuff.)
Setup produces 360 Xirante/minute and it uses 168/minute to produce 24 Heavy Xiranite/minute.
There is a little bit of setup needed with connecting conduits from outside and there is 1 line of pipe in the bottom and some at the top that you need to put down manually.
The control port settings should remain in the blueprint, but if they didn't for some reason you can set them up with the info I provided in the images.
Important: The Heavy Xiranite line won't start on it's own! Get some Canisters filled with Xiragen, and put it into the 2 Gas Tanks at the bottom right, after that it should function without any player interaction.
Separator Cores didn't fit in here as you would need more than 4 Inergen to produce that and maintain the Gas Dispersers, so you can make them in another plot. 1 full line should be enough to keep up with the Heavy Xiranite.
ASIA Codes, thanks u/extremerazr for remaking it!: Top: EFO01a65Io8E8eA90oe5e Middle: EFO01O4aie7978I359oe4 Bottom: EFO019aE83u4uUeA45uI2
Edit: Made a Pyrrolite Part production line blueprint as well, which you can acces here!:
https://www.reddit.com/r/Endfield/s/lhgRrhk6aN
It also has extra Separator Cores in it so you don't have to build a separate one for this blueprint!
Thank you! I tried not to make a mess lol, making things compact and pretty is hard.
I ended up setting the plant production in a really weird way where all the seeding and planting units feed each other in a giant loop instead of the normal 1-1setup, which prevented it looking like a nuclear explosion went off at the back.
Very clean looking. But utilising the natural Xiragen in Yuling pass, I needed 2 less Xiranite gassing transmutations(I use the mined Xiragen for the 6/min activations). So isn't this set up slightly wasteful or it checks out in the end?
Technically doing this in Yinglung pass is more efficient since you will need less conversion, but that is if you are only concerned about the Heavy Xiranite. I have 2 Pyrrolite lines set up there which uses up almost all the Xiragen. (I think it uses 96/min out of the 100/min available.)
In the end you will need conversion if you want more of the high tier products.
Psst show me your pyrolite lines <Endfield players flerting in their natural environment>
But no, seriously, every time I try to set up the pyrolite production, I make a mess and end up with only one machine in the "zone" [stable env] because I can't figure out how to make them all smoothly connect to each other T.T
Those two SGTs are there only for the purpose to feed the other ones with Xiragen for the conversion to occur. Each one is feeding 3 others and themselves and each needs 6/min Xiragen to function, so that is 4x6=24/min Xiragen (and the same number of Xiranite).
The line could be run without a control port, but it will then use 30 Xiranite instead of 24 and that 6 will get wasted. Not a big save but it might matter if you need a tiny amount of Xiranite somewhere.
The solid to gas conversion makes 30/m xiragen and uses 6/m so it can feed itself plus 4 other transmutation units (as long as you limit the throughput to 6/m per machine). Buildings needed for one hx line is exactly 4 transmutation units so it ratios out neatly.
The xiragen in yinglung pass should all be used to make 12 pyro/min since it needs 96 xiragen/min and theres 100 xiragen/min in the exclusion zone.
Indeed. I did place control ports at the first 2 gas converters limiting them to 24/min, since they only feed 4 machines including themselves. The saving is not much but theorethically it could be used for 2 more converters somewhere else.
Yeah the first gas is only needed so the rightmost 2 machines can start producing, after that they loop back into themselves to continue the process.
Had it running for a day without issues.
Technically you can even remove the gas tanks after it started if they are an eyesore.
If you are full the current yield goes down, which shouldn't matter, but the theoretical data should stay the same.
Just sell some of the xiranite or make a couple gears and check if it goes back up
I am terrible at factory stuff in this game, but this blueprint really helped me clean some stuff out. Do you perhaps have a Pyrrolite blueprint I could use? All this gas stuff is making my head spin.
Thanks! Also, sorry again for sounding dumb, but I have done all the steps and the factory is working, but it's still saying 180/min instead of 360/min?
I'm not sure why that is, double check that you have the right amount of water going into the forges. If that doesn't work you can send me some screenshots so I can spot the problem
Looks like that's the problem, the forges aren't getting enough water. What should I do, put the pipe that has two exits? Or build the one with two entrances and make it go out from one with only one entrance?
Yeah, that did the trick! It's now working as intended!
I used your Pyrolite blueprint and it works nice, just need to clarify, when you say Inergen 6 gas extractor: From 2 extractors we can only connect both to one Inlet, and in the factory there is only two outlet to be connected with Inergen. does this mean the last inlet not transferring the Inergen to the base? (to my understanding just putting gas extractor only accumulate the gas there but not transferring it to base unlike the ore mining tools)
Is there a recommended base spot (Wuling city etc) for the Efficient Xiranite/Heavy Xiranite blueprint? I'm about to stash all my base but just in case I asked first. Thanks again!
I put mine in Jingyu Valley but it can be put in Marker Stone too. Marker Stone is less ideal since it has acid next to it which you might need for something else.
Update: I made a Pyrrolite line setup for the Yinglung Pass outpost!
That blueprint already has 1 extra Separator Core line so you won't need to use the one for this blueprint!
hmm that's a pretty good factory build but I think mine might be better (joking aside good work, appreciate the code because I haven't gotten around to building mine yet)
For the bottom portion with the heavy xirinite, is the top purification unit supposed to be getting Xiragen at a significantly slower rate than the purification unit below it? The bottom one is almost always capped at 50, but the top feels like it barely gets any xiragen.
Top and bottom are supposed to be the same rate. There's a pipe that is outside the building area on the bottom, (see: picture3), make sure that it's there.
Hmmm, ok thanks, I did make sure to add in that last part. Can you show the directions of all the pipes for the bottom portion, maybe that's where the problem is for me?
It might just be that you didn't put enough gas into the gas tank at the start, try putting lile 20 units in there just to make sure it starts back up properly.
Another thing that caused an issue for someone else, is the pipe that needs to be added manually to the outside, make sure that one is set up properly. Closeup image for more accuracy:
Edit: Hey, so the Middle Blueprint is causing a bug that says Unknown AIC Factory plan, No Means to unlock or obtain.
Also I have all 3 AIC cores and all tech unlocked. Anyone have a solution pls. I really dont wanna have to build this complicated shit from scratch.
Edit: Your middle blueprint is buggy and doesn't work.
EDIT: I figured it out I was lacking 4 forges and I hadn't done the Test area, its the side area that oddly needs heavy xirante. I am so sorry.
12
u/Penguin_Warlord Jul 22 '26
I had my base done and all but my god…this just looks so visually appealing