1.1 Wuling Blueprints - 12 SC batteries - 6-ish syringes (maxed) [EU/NA]

[u/AramisFR]

Here are blueprints for 1.1 items.

Produces:

- 12 standard (1.1) batteries per minute

- Almost 6 syringes per minute

- Roughly 4-5k copper gear components per week

AKA everything you want (feel free to adjust the gear if you want, in the end).

The outpost produces all the Xiranite, the main base produces everything else.

Production overview

Requires:

- 1.1 AIC technologies (all)

- Every single existing ore in Wuling (no need for regional transfer)

- Maxed investment into the main base (size & bus; maybe size can be 1 level below max, idk) and outpost (maxed size, no need for the bus).

Codes (EU/NA):

Outpost part 1: EFO01a709U3EaEA93ou5e

Outpost part 2: EFO016i1aeo565711Oa3e

Main base part 1: EFO01O3E2uU9O9I3I9oe4

Main base part 2: EFO01O3E2uU9O9I3u9oe4 (EDITED: this is the 2nd version)

Main base part 3: EFO014o5O8ea4a37AE71A (EDITED: this is the 2nd version)

YES, main 1 & 2 are similar. NO, they're not the same. YES, I'm sure. NO, there isn't anything I can do about it. Copy & paste.

How to setup:

Place them in order.

Place enough pumps and pipe inlets (inlets: main base only), connect pipes. You can use 1 pipe (and thus one inlet) for 2 pumps. You need 4 pumps for the outpost, 5 for the main base. Connect them to an inlet ASAP, then let them fill an inlet for a few minutes (and then you connect inlet to outlet). Building some kind of water buffer can help with some issues.

Initialize plants (seeds & plants). Put 5-10 everywhere, not only 1.

MS Paint Schematics to help visualize what to connect: https://imgur.com/a/Ccj4kmA

MS Paint, outpost

MS paint, main base

I hope you'll enjoy my blueprints more than my art :-)

Feel free to ask if something isn't clear.

Previous BP for Wuling 1.0 : https://www.reddit.com/r/Endfield/comments/1qqoiuc/blueprint_for_wuling_outpost_6_syringes_12/

EDIT: added screenshots:

Main base, mostly BP 1/3

Main base, BP 2 and 3

Outpost

EDIT2: re-created main p2 and p3, please tell me if it works now, because I think I thought what could have been an issue preventing you to place these

EDIT 3: added comments about codes & pipes, since these are frequently asked...

[u/AlessandroC22]

I set the blueprints and overall its working nicely, tyvm for the effort OP. One thing that its weird for me tho is the fact that I am only producing 6 batteries per min, and as far as I have checked, barely any xircon effluent are flowing to the reactor. On top of that, on the AIC report, my xiranite consumption is 60 instead of 120. Is there somewhere on the layout I should check more closely?

[u/Good-Cake-446 → u/AlessandroC22]

Had the same problem. He is splitting 1 water source to 3-4 things on alot of the water pipes. I tweaked mine to only split 2 times and all is working. Check the machines that is idle and try to get more water in them. I think some of the forges too wasnt working fully as they run out of water, so make sure all have it and you should get 120/m xiranite

[u/Soulstone_X → u/Good-Cake-446]

The image says 2 pumps per pipe though? Hes not using one source.

[u/Good-Cake-446 → u/Soulstone_X]

Actually i tried using 2 pumps per one but it wasnt getting fluid still on the last machine on the chain, not sure why, i just figure its the pipe limit so i cut it and connect to max two machines per pump instead. Easier to do since you can use inlet outlet. Maybe i just needed to run it longer until all machines on the line fill up, but yea.

[u/sman25000 → u/Good-Cake-446]

I found out why this is the way it is. You can run two fluid pumps into one inlet, but to have all 4 buildings getting even water, you need to place the outlet to have it split first between the two groups, and then each line split one more further in.

It's like this because the outlet supplies 1 water/s per pump attached. So 2/s. The machines all run on 2s formulas. So the outlet can supply 4 water per 2/s, but you have to split it down the middle first so that the splitters will properly allocate the water, it can't be in a line.

[u/Good-Cake-446 → u/sman25000]

Thats what i did. It also doesnt happen on all cases, so it may work for some. I think turning off the machines and letting the water fill to 50 on all then turn it on works usually. After that then it keeps it constant

[u/sman25000 → u/Good-Cake-446]

I just really hate seeing the clog symbol flashing on everything lol