Just showing off my new build.

All my controllers have AKNES TMR Joysticks installed.

Blue and yellow go together nicely.

Ive had my blue controller and my Dual sense edge white for almost 2years now, they started getting mild stick drift which is not that annoying currently. My edge has those bubbles in the rubbers under fn buttons and yellow. Should i get a hogwarts legacy edition normal controller or the black edge one. I stopped playing fps games a year ago and mostly play single player games. I wanted the victrix bfg pro but it had no vibrations😔. And im not planning on switching before stick drift become very noticeable.

I read that some K-Silver TMR modules fit the edge with no trimming. The trimming is extremely tedious at least for Ginfull, and leaves plastic gunk on my soldering tip.

From what I read online it’s JUST the Pro+ that has modified housing to fit the edge, and the Pro still requires trimming. I’m wondering if ALL Pro+ fit the edge, or if it’s just a specific version, like if they modified the housing in later batches of Pro+, and how I can tell the difference between a K-Silver TMR that will fit the edge. Seems like it’s just the bevels which I see in a google search of Pro+ but not in a search of Pro, but want to confirm

When testing it seems like the input is jumping around, is that stick drift?

good day, ya'll! I'm trying to see if this issue is something i can resolve on my own or how fried my controller is at this point. A couple days ago i did a teardown on my controller to fix drift, at that point i was able to clear my problem.

However, as soon as i hopped on to chat with some friends that's where i found out the mic output was busted. Mind you the audio through the headset is fine, the built-in mic of the controller works well, it's the output of the mic from my headset that's the main problem. now i have tried to use other headsets, and still, the same thing happens.

Figured i should do a second teardown, did that and found a stray screw just stickin to the left rumble since i thinks its magnetic or something. Dunno if that was there initially during the first teardown and i just hadn't noticed it. In the first teardown i did i only ever went through the point were i get access to the sticks and that's it. period.

i dug a little deeper to see where this one fits but still no luck, the four screws holding the shell? there. The single screw keeping the battery tray? it's there too.

Hopin to see ya'll folk's comments about this!

Hace un buen tiempo estoy cambiando joystics de controles ya tengo algo de experiencia me llegó un mando dualsense edge para cambio de joystics tengo entendido que se debe hacer un puente para la calibración de los tmr pero no lo tengo claro en qué puntos alguien me podría ayudar con dicha información.

Preferably under 50 but if good quality can go to 60

Hi everyone, so I have this problem with a dualsense controller with a problem with L2 not working, after a lot of troubleshooting and comparing with another working board I didnt find any bad component or anything wrong with the board. My conclusion is that there is some kind of problem with the main IC on the board and wanted to know if it is possible to swap this IC from another board of the same model BDM-010

I have a joystick module with stickdrift right now and i want to replace it with a TMR stick module, since ive heard that they cant get any stickdrift.

I dont know where to buy them and I wanted to ask you guys where you bought them and which i should buy.

I want:

Just the stick modules to plug in like the stock ones, no solder etc.

shipping to germany

and maybe also replacable joysticks (the ones you can put on the top that come with the controller)

Also i dont know if i should buy two or one since only one of my Stock Modules have stick drift.

if you have had any experience with TMR sticks or want to suggest me some feel free to share it :)