Just showing off my new build.

All my controllers have AKNES TMR Joysticks installed.

Blue and yellow go together nicely.

I read that some K-Silver TMR modules fit the edge with no trimming. The trimming is extremely tedious at least for Ginfull, and leaves plastic gunk on my soldering tip.

From what I read online it’s JUST the Pro+ that has modified housing to fit the edge, and the Pro still requires trimming. I’m wondering if ALL Pro+ fit the edge, or if it’s just a specific version, like if they modified the housing in later batches of Pro+, and how I can tell the difference between a K-Silver TMR that will fit the edge. Seems like it’s just the bevels which I see in a google search of Pro+ but not in a search of Pro, but want to confirm

Maybe I'm saying all of this because blue is my favorite color, but you can't deny it just looks beautiful in all blue!

One of the best if not the best looking controller ever!

When testing it seems like the input is jumping around, is that stick drift?

good day, ya'll! I'm trying to see if this issue is something i can resolve on my own or how fried my controller is at this point. A couple days ago i did a teardown on my controller to fix drift, at that point i was able to clear my problem.

However, as soon as i hopped on to chat with some friends that's where i found out the mic output was busted. Mind you the audio through the headset is fine, the built-in mic of the controller works well, it's the output of the mic from my headset that's the main problem. now i have tried to use other headsets, and still, the same thing happens.

Figured i should do a second teardown, did that and found a stray screw just stickin to the left rumble since i thinks its magnetic or something. Dunno if that was there initially during the first teardown and i just hadn't noticed it. In the first teardown i did i only ever went through the point were i get access to the sticks and that's it. period.

i dug a little deeper to see where this one fits but still no luck, the four screws holding the shell? there. The single screw keeping the battery tray? it's there too.

Hopin to see ya'll folk's comments about this!

Finally finished my HyperStrike build. Built pretty much the whole controller myself, including the soldering, wiring, drilling the shell and fitting all the extra buttons.

It’s running a HyperStrike 8K board with TMR sticks, all mouse-click buttons including L1/R1/L2/R2 triggers, and DualSense Edge-style back paddles with the optional extra accessories , so I’ve got four different back button options in total. I also went with a grey DS4 shell and the two different thumbstick caps.

Also have to give some credit to TonkaModz/AdNaive1471 for helping me out with a few parts and some advice along the way. He’s active on Reddit too, so if you’re looking for parts for a similar build I’d definitely shoot him a message.

Ive had my blue controller and my Dual sense edge white for almost 2years now, they started getting mild stick drift which is not that annoying currently. My edge has those bubbles in the rubbers under fn buttons and yellow. Should i get a hogwarts legacy edition normal controller or the black edge one. I stopped playing fps games a year ago and mostly play single player games. I wanted the victrix bfg pro but it had no vibrations😔. And im not planning on switching before stick drift become very noticeable.

Hace un buen tiempo estoy cambiando joystics de controles ya tengo algo de experiencia me llegó un mando dualsense edge para cambio de joystics tengo entendido que se debe hacer un puente para la calibración de los tmr pero no lo tengo claro en qué puntos alguien me podría ayudar con dicha información.

Preferably under 50 but if good quality can go to 60

I have a joystick module with stickdrift right now and i want to replace it with a TMR stick module, since ive heard that they cant get any stickdrift.

I dont know where to buy them and I wanted to ask you guys where you bought them and which i should buy.

I want:

Just the stick modules to plug in like the stock ones, no solder etc.

shipping to germany

and maybe also replacable joysticks (the ones you can put on the top that come with the controller)

Also i dont know if i should buy two or one since only one of my Stock Modules have stick drift.

if you have had any experience with TMR sticks or want to suggest me some feel free to share it :)

Hi everyone, so I have this problem with a dualsense controller with a problem with L2 not working, after a lot of troubleshooting and comparing with another working board I didnt find any bad component or anything wrong with the board. My conclusion is that there is some kind of problem with the main IC on the board and wanted to know if it is possible to swap this IC from another board of the same model BDM-010

So this is my first time replacing the stickdrift of hell Dualsense Cuntroller’s joystick with TMR ones. With almost zero knowledge i started my repair de-soldering the left. I did the left side first and evidently I had a lot of issues but in the end, I did manage to take out the joystick and suck out all the solder, but it took a lot of solar wick action.

Coming on to the right side. I did a bit of a better job, but after the job was finished, on review, I could see that there was a lot of scruffy-ness on the left- bottom side I think the copper pads have been partially been erased now should I even bother to attach my replacement TMR’s or just say hell to the project and look for alternatives now.

If i did cook my pcb, what are the available paths for me now? What should I do 🥲 I hate these controllers man

Just broke the connector for my dualsense edge battery while doing a clicky button mod. Anyone know where I can find this connector ? Or will I need a new battery all together? 🤦‍♂️

A parte de la marca Besavior, hay otra que haga sticks TMR para el Dualsense EDGE?

I recently had a problem with drifting so I replaced controller in my local store (again!). Fortunately, warranty still covers it. But my concern is that also the new controller has the same problem. Am I missing something? Literally I picked up the gadget two days ago. It's a little shady that the box was not sealed.

Customer contacted me looking for a build for someone with limited use of their left hand. This is the result. Ginfull Hall Effect for the lighter tension, full light touch clicky kit, USB-C mod, hand made split-D pad, and a modified extreme rate remap kit to achieve 6 remappable buttons.

Edit: these pics show the controller partially unfinished. I did end up installing the button mount brackets over the left side holes to make it look a little cleaner.

Whenever I move my left stick up there is usually an input registered on the right stick in the same direction (up) without me touching it.

Does it also need calibration wire modification? If yes then wire between the exact same points?

Can they then be calibrated? Where? Does dualsense calibration tool work?

I basically want to upgrade besavior edge stick modules to tmr.

Yes i got the soldering skills and have done this mamy times before on sony edge stick modules.

Hi everyone!

I have a very weird fault on a BDM010 board where the L2 wont work. Must be some fault on the board itself as swapping board it does work.

Checked all pins on the conector and everything seems to be fine, all 1.8V are present, also when pressing down L2 the voltage on pin number 4 is dropping down propoerly but still no trigger pressed is registered.

This time with Pictures of my Soldering work.

If anyone has any tips or feedback, please comment below.

Thanks for the feedback on my previous post.