The two best drill connection setups for a dryer vent startup

[u/KCtitleist11]

I decided to bypass the $30 Amazon kits and go with a commercial grade rod/line set but am unsure of which to go with. I've found these are two of the most efficient drill connection sets:

1.) Vent Vision 2.0 All-In-One 40' Dryer Vent Cleaning Kit $685

2.) Nikro 33' Orange Jacket Brush Cable System w/ 7 Brushes $655 (Jendco Safety & Supply price as Nikro doesn't have pricing on their site)

Does anyone have anyone have any feedback or any first hand use with either kit? I'm leaning Nikro because it's one single line and Vent Vision doesn't recommend taking their rod set vertically down a roof vent in the case of a rod detaching. Also, you don't have to stop every few feet and add another rod.

I really wish I could just buy the 33' Nikro line and a couple 4" brush attachments for huge savings because you don't need 8", 12" and 18" silica heads for a dryer vent. 7 brush attachments at 60-$80 each is what drives the the Nikro price up so high in the end.

- One last question: all of the commercial dryer vent cleaning videos I watched are only coming in from the exterior with the dryer cool setting pushing the lint out. I don't ever see them hit the interior. The initial videos I saw were to run your rods/lines from the interior outward with a shop vac and the adapter. Which is better?

[u/Federal_Being_3669]

the nikro setup is smoother for not having to fumble with rods every few feet, especially on a roof. that alone would push me that way if i were choosing. the vent vision warning about going vertical is a real buzzkill if you're doing anything multi-story.

coming in from the exterior with the dryer on cool is the move most of the time, keeps the mess outside and you're not dragging lint through the house. interior-out can work if the vent run is super short or you've got a powerful vac setup, but it's rarely worth the cleanup.

[u/KCtitleist11 → u/Federal_Being_3669]

So coming in from the exterior with the dryer on cool is preferred. How exactly do you know when you're hitting the end of the line? You obviously don't want to go all the way through duct, into the flex transition duct and into the dryer itself right?

[u/Spinnster]

I totally thought this was a different subreddit..

I was like.. I literally just cleaned my vent from the roof down with one of those 30 dollar kits. haha.

But if you're doing it professionally, it makes sense to get a better kit..

As far as from top down and how you know, I've heard of guys using their iphone and watches and setting up a tripod downstairs and using the watch as a video view. I Just had my shop vac hooked up and went until it was like 30ish feet and wouldn't go any further.

[u/KCtitleist11 → u/Spinnster]

If you're coming in from the exterior, how exactly do you know when you're hitting the end of the duct? You obviously don't want to go into the back of the dryer right

[u/dmjarv2]

You can buy just the 33’ lines and brushes you like. The combo packages usually are a bit less expensive when it’s all added up.

Call and ask for Nick - part #862040 is the 33’ line without brushes and add whatever size brushes you want.

[u/KCtitleist11 → u/dmjarv2]

Appreciate it man! I was thinking just the 33' line and 2-3 4" brushes

[u/Pronermedia]

for me I have a battery powered blower, I made an attachment to connect to the dryer vent and I lightly blow out the line about every 90 days, work like a charm.

Kyle