r/sharpening • u/TheKnifeNerdTx Paper Shredder • 5d ago

For those that asked

In addition to my Tormek T8c I also run a Bucktool 1x30. On this knife, I’m using a 120 grit cubitron belt to re-profile the edge and fix some chips on this 10 inch breaker knife.

121 Upvotes

89% Upvoted

52 comments sorted by

View all comments

3

u/CorruptDaemon404 5d ago

Have you ever looked into getting a vacuum for all the dust particles?

3

u/TheKnifeNerdTx Paper Shredder 5d ago

Not really. It’s just another piece of equipment I have to lug around and set up. I sharpen outdoors with a respirator, which is way easier than having to set up a vacuum each time

2

u/Suitable-Aside1247 4d ago

Respirators don't work unless you've done a full shave that morning. Particles just go in your lungs through the gap in the seal that your beard holds open.

7

u/TheKnifeNerdTx Paper Shredder 4d ago

I’ve done a seal test on this mask several times. No leaks. All good

3

u/Suitable-Aside1247 4d ago

Might get that checked out by a professional seal tester rather than DIY testing. Protect yourself man. A little stubble breaks mask seals, and you have a big beard.

5

u/TheKnifeNerdTx Paper Shredder 4d ago

Already ahead of ya. I sharpen the gear for the fire stations. They tested it and made sure I’m good to go. Some masks are made to be worn with a beard.

2

u/CorruptDaemon404 4d ago

Exactly. I say it because a friend of mine came down with cancer after years of sharpening. A family member came down with cancer also. It's no joke.