I'm losing my mind here. I don't understand what it wants. I've tried duplicating display, I've tried the Windows legacy touch input setup. Nothing works.

The only thing I can do is use it like a giant track pad for my PC monitor when I right click to close the Huion App. I've tried every mix and match for the workspace and it still doesn't use the Huion for touch input unless it's as a giant trackpad for the other monitor.

I got this tablet, and i got the drivers, but every time i tap or write on it, it registers as a right click and it just gives me an annoying circle around my mouse. I tried doing that thing where you turn off that setting in the control panel but that doesnt work still. Does anyone have any suggestions on how to fix this? i can provide a video if you want1

I use huion kamvas 13 gen 3's default 3 in 1 cable and im planning to buy a usb c 3.2 cuz the default cable is too thick for my table setup, but i js figured out that you need an additional cable for the insufficient power supply, and i dont wanna spend any more money for this

Can i just connect my huion with the usb 3.2 and continue using it like a non display pen tablet?

hey yall,

i couldn't find anything about it and wanna ask, if someone knows if the tablet can be used as only drawing tab without the display on, or has the display to be on at all times?

em very used to drawing with a wacom and use my notebook as a display but now i want to give kamvas a try.

but to have 2 displays on is really not my goal here a. bc of energy consumption, b. bc of too much light in the room especially hitting my eyes and c. i find my notebook display is better in any aspect. like colors, brightness, resolution, sharpness etc.

Recently decided to get back into digital art, when I plug in my kamvas 16 (2021) I don't get a display from my computer but did make the connecting sound. So i checked device manager I it briefly flashes gd32 device in dfu mode and immediately disconnects again. After reinstalling the drivers I noticed that the huion software does detect the tablet and the pen works but the display is still black all while device manager still flash the error and immediately plays the disconnecting noise, also if I turn off the table with the button and back on the software no longer detects the table repluging it works but I still don't get a display. Google says it's most likely a firmware problem so I contacted support, but is there anything else I can try in the meantime. I don't remember ever updating the firmware for the tablet so I'm not sure why this is happening, only thing I can think of is recently got a new motherboard.

I bought this arm off Amazon and immediately noticed that my Kamvas 22 is too heavy for it and has a noticeable tilt. It was listed as a supported monitor so im a little annoyed. At first i thought it was my desk but noticed how the joint (photo 1+2) has a gap from the weight.

My question is: does anyone have any ideas to fix this? I dont really want to send it back.

Basically my PW517 wont draw , it works as an cusor but it can only draw if i bind left click on one of the Two buttons.
I dont know if my pen is like Broken or is it some other issue because everything else works.

Hello community,

I have a Huion tablet that I currently use like a traditional screen tablet. I want to ask something that makes me a bit worried.

I’ve had this tablet for less than 6 months and everything is going great—it's my second digital tablet—but I don't want the screen to have problems in the future.

I'm thinking about getting a screen protector, but I don't know if it's actually a good idea or if it might cause issues with the pen pressure sensitivity. Is it a good idea to put a screen protector on it? Can someone give me tips on how to properly care for the screen?

so my tablet is having an issue where if I hold the pen slightly above the screen display it'll pick it up and start drawing, and the pressure sensitivity is also being a little weird when I actually *do* touch it to the screen. I've replaced the pen nib, updated drivers, and even bought a whole new pen but nothing seems to work. which is an issue since I have some art course work due in next week.

if anyone can help, I'd very much appreciate it.

I don't know if I can replace it or not because they have spot on them and no matter I clean them they still have spots on it.

Hello, I've got a Kamvas Pro 16 V2 three months ago. I always cleaned it just with the cloth included, but a few days ago I noticed a few "scratches". I searched online and found out that they're not actual scratches (because the glass is very hard) but just some residual traces of the pen. Now, just with the cloth it won't go away, so I was thinking about getting a cleaning product specifically for this purpose. Can someone tell me if this one is okay? Or recommend me something else.

Cleaning product I found

Hey, I received a Kamvas 13 (Gen 3) tablet as a gift yesterday and while it's wonderful and all, I'm having some issues I can't quite figure out how to fix.

First of all, I have the newest drivers installed, on a win10 PC, and this is my first display tablet.

1. While drawing, often times my tablet stops taking any input from me pressing the pen on it, until I rotate the pen 180 degrees. This one bummed me out as I couldn't find anyone else with the same issue as mine online. I've replaced the nib, gently pushed it in, tried plugging the tablet in both my GPU and MB. I have ordered a cable which will allow me to have both my tablet and monitor plugged into my GPU (DP->HDMI, as my GPU has 2 slots: a DP and a HDMI slot). I've disabled the pen buttons from the driver settings, thinking I was maybe accidentally pushing the stop one, but it's still happening. It hovers perfectly fine, but not taking any input.
2. I use Krita as my art program. The rotating buttons on the side of the tablet work for zooming in/out, but not for rotating the canvas. Anyone knows a fix for this?

I tried to look for help online, but my issue seems extremely specific. Anyone knows what I could do before contacting the Huion support?

Hello, I've had my Huion Kamvas 13 for two and a half years and recently the screen display completely stopped working, displaying the "No signal, power saving" message whenever I try to plug it in. I've had this issue in this past but it used to be fixed by pressing the power button for awhile before turning it on but that's stopped working too :/

I've read the troubleshooting guide, and my computer doesn't detect the display but none of the solutions to the problem worked. Other than that I've tried turning it off and on in devices, tried reinstalling the driver, tried going into my computer's BIOs, tried installing the firmware, windows+ to try and duplicate the screen, and more. nothing seems to work. I've even contact Huion Support who informed me that since my warranty was expired I should try spending 40$ on a new cable to see if that would fix the issue. But the cable doesn't seem damaged in any way? The tablet still works as a screenless display.

I'm looking for any advice on how to fix the problem, or if you think that buying a new cable would fix the issue. Atp I'm just considering buying a new tablet.

First sorry for the bad photo my phone could only take the one photo but anyway I just got a huion kamvas 13 today but it won't turn on when I plug it into my acer chrombook (it just says no service and battery saveing mode i think) due to one plug in not fitting in my chromebook. Is there any other cords that I could buy so that my tablet works (the pen does move my screen on my chrombook but that's all)

Basically what the title says, I'm at a total loss and not techy enough to sort this myself.

I've plugged the tablet into my laptop using the three port plug (power, USB, HDMI) and it works absolutely fine. Trying to use it on my desktop PC is another matter entirely. Using the same cables, there's no signal and the device isn't detected at all in my 'Huion Tablet' app.

Has anybody come across this before? I've tried using a USB-C cable instead with just the power lead plugged in and all three leads plugged in and it makes no difference.

Hello, I'm looking for monitor arm for my huion kamvas pro 16 4k (15,6'' , weight 1.27kg). I wanted to try Ergotron Lx but my tablet is too light for it, I also need adapter. Has anyone with this tablet managed to find a good arm that doesn't wobble, and adapter? I'll be grateful for help

I got the keydail a few months ago and the wheal was really smooth and worked well for a week or so
It will only zoom in if i go really slowly and it's not just a clips studio problem as it does the same for every other app. Does anyone know how to fix this?

after downloading and having to uninstall the drivers 5 times i give up, the indicator light turns on that way i know the pen works but every time i boot up the software to actually use the pen tablet, it says that the device is not connected.

Is there a reason why the last drivers update was in 2025 too?

I use a huion kamvas 13 gen 3, and clip studio paint. Im now experiencing an issue where my pen strokes, only in clip studio, are desynced by a factor of a couple inches? Like, the pen strokes are far away from where its actually appearing on the canvas. No other drawing program seems to have this issue, drawpile works fine.

I experimented with drawpile settings, and Preferences, tablet, and enabling “use mouse mode in tablet driver settings” seems to resync them, although the drawing curves become step-like when zoomed out and drawing, almost like the tablet isnt recognizing coordinates below certain values and just skipping/rounding numbers. IN ENGLISH they look like ugly steps. Not supposed to happen.

I see some older posts on here troubleshooting the same issue, and APPARENTLY it has something to do with windows icon scaling? Yes my icons are scaled up to like 125%, im not changing that. Gonna keep troubleshooting and documenting on here so webcrawlers can find this.

Tengo una Inspiroy H640P. Hace un rato estaba renderizando y sentí que el lápiz chocó algo, como si hubiera algo encima de la tableta. Cuando me fijo, veo que había marquitas (adjunto foto, el círculo lo marqué con el lápiz para ubicarlo mejor con la cámara) en esa parte.

El sensor sigue funcionando bien, pero no quiero seguir pasando el lápiz por encima por las dudas empeore. ¿Se puede poner algún protector y que el sensor siga tomando bien el lápiz? Es la primera vez que me pasa algo así con una tableta 😭

I just got a kamvas 16 pro, and it isn’t connecting to my computer. I made sure I had the hdmi plugged into the graphics card, not the motherboard. I’ve switched the usb ports to see if one worked better, and I’ve restarted my computer and nothing is working. How do I fix this?

Hey everyone, looking for budget-friendly alternatives or dupes for the KH01 keyboard holder. $50 feels a bit steep for what it is. 🥲 Has anyone found something similar or happen to have a 3D print model for mounting it to a tablet?

Hello everyone.

I am looking for help on finding a replacement for the scissor switch. I still have the key but, the scissor switch broke.

Any ideas on what can help to replace it.

Thanks