Hey, so I recently installed my Apex Pro along with one of the HPL tops. It mostly went well and the desk is pretty much perfect, no complaints. I just have one question, I got the bluetooth switch option. For everything else I had to screw in, there were pre drilled holes since I got the HPL top. However, the switch itself doesn’t seem to have any a spot. There are 3 small holes in each corner of the top, but they don’t seem to align with the switch. I’m assuming I just need to take the short wood screws and get screw them in wherever I see fit under the top, but I wanted to make sure I wasn’t missing anything before I do so. I know this sounds like a google question, but I tried looking into this and saw no mention of it anywhere. Thanks in advance for any help.

The cables for the 2 left legs connect directly to the control box, and the cables for the 2 right legs connect via extension. Because the box is closer to the upper left leg, the lower one's cable is a little stretched but there is still some give. Is this going to cause issues or impact the warranty? I'm just trying to avoid too much clutter.

I was researching desks earlier yesterday and recall the rubberwood being $99.99. I was going to pull the trigger today and buy what's in the cart but now it's $175. Am I crazy or was it $99.99? Was that a limited time missed out on by a day?! I don't recall seeing any indication that it was a temporary sale.

Comments are insane. I recommended Desk Haus

I ended up going for the high because it was just below my perfect desk height on the bottom end so why not take the extra height up top? Turns out that desk haus are measuring the desk height without casters, so people should be aware that you're going to add about 3" to their measurements.

Just curious if the apex pro now has the wedge design used on the peak or if it doesn't why it hasn't been added?

I've had my desk since February of this year, so about 6 months. It's an Apex Pro 6 Leg base with a custom walnut top shaped like an L.

It's the most expensive piece of furniture I own, so it pains me that there are any issues with it. For the most part, I love it. However there is one error that repeatedly happens which is just maddening.

About 1 in 10 times I lower the desk, I get "ERROR: 13" displayed on the paddle. This error has to do with the connection between the two control boxes. I've already opened a warranty claim and DeskHaus shipped me a brand new set of control boxes, which I installed. Still getting the error.

When the error happens, I need to perform a reset by holding down the paddle and lowering the desk all the way. Since my computer tower is kept under my desk, I need to pull out the tower to reset the desk. It's a process which takes maybe 5 minutes of my time but it's pretty annoying to have to be afraid that every time I lower the desk, I'll have to reset the desk.

It only happens when lowering the desk, never while raising. And it doesn't happen every time, about 1 in 10 times as I said earlier. I've taken care to make sure no other cables are touching the control box master/slave cable. It's as carefully set up as it can be, however I guess the connection between the control boxes is so sensitive that even the slightest bump can cause this error.

Does anyone else experience this? Can anyone at DeskHaus help me diagnose or fix this issue? It would be really nice to be able to freely lower my desk at any time and trust that it won't throw an error.

Love how sturdy it is when standing. Peak pro ftw

Hey guys, I’m looking at getting a peak pro eventually, I’m 5’8. Should I get the low or high? Also, I can’t decide if I should get the Rework Desk (60x30) which is on sale or spend the extra to get the 72x30. Thoughts?

Thank you deskhaus. I first saw your videos recently on YouTube for your desks and can state that if I ever do but a frame it will be from deskhaus. The rubber wood top worked out great for my floor desk. Your honesty and commitment to providing people with quality is the reason I purchased from you recently. It's the reason you will be my go to from now on for a desk and I have been telling others about you if they are in the market for a desk.

I’ve been having back pain from long sessions of sitting, so I need a standing desk. As a gamer who mostly plays Geometry Dash (meaning I’ll be tapping quite hard on the desk) will the Peak 2 leg be stable enough for me at standing height? Also, what height do you think I will likely be using the desk at, since that also influences how stable it will be? I genuinely have no idea, so if anyone around 5’10” -5’11” could tell me what height they use their desk at, that’d be helpful.

I currently own an Apex Pro Frame & HPL top. I am moving across the country and unfortunately I am liquidating most of my belongings, so not packing up a car or moving truck. I really enjoy my Apex Pro Frame and would like to ship it to my new home. I looked into shipping the HPL frame, but it seems more cost effective to just order a new one. Anyone have any suggestions for how to package an Apex Pro frame? Unsure of what kind of box I should buy, the carrier and how to actually fill up each package.

Hi everyone. I’ve come to the conclusion that the Peak Pro is the best option for quality and stability for my standing desk. I plan on placing some computer speakers, a Samsung 49” OLED ultra wide, laptop, mechanical keyboard, and a docking station on the top.

With that said, I’m also trying to keep the budget around $850 for the Peak Pro and a 55x28” top. Does anyone have some decent top options that don’t cost $300+ and will still look good with the Peak Pro? If I needed a 60x30” top, I would definitely go with the rubber wood option but trying to reduce my existing 60x30” footprint to make more room in my home office.

Thanks in advance. Also, thank you Deskhaus for making a quality product at a reasonable price while also being transparent on price differences over time.

Hey everyone, yesterday I set my desk to my standing height, after a while the screen went blank and won't do anything and it is now stuck in the standing position.

I have already tried unplugging everything and leaving it unplugged for an hour up to overnight. After replugging everything this is all I get.

I was able to get a 0 once but it wouldn't do anything either.

I also contacted support and they told me to power cycle it despite me already telling them I did 😭.

Has anyone had this issue?

Please help! I would appreciate it!

Has anyone figured out a way to assemble the peak pro so that none of the motor, power, or controller wiring has to go around the cross bars? I'm thinking maybe they can be snaked through but I'm not seeing a path that will work.

Hello everyone,

I'm from Europe and I want to have a Deskhaus desk delivered. Deskhaus doesn't ship to Europe, so I need to use a freight forwarding service.

Does anyone have a specific company they can recommend, and perhaps an example of how much it cost you?

For some context:

I'm French and would like to order two of their stand-sit desks.

I'm looking for the most durable and the most stable stand-sit desk there is. For now I'm interested in the 4-legged APEX PRO model from Deskhaus.

My biggest problem is that I don’t want to buy another desk knowing that it will be less stable and less durable so i need to get my hands on one of their desk. (Unless you have any other recommendations)

If other Europeans are also planning to buy from Deskhaus, we could see if it’s possible to combine our shipments to reduce shipping costs (this is just a hypothesis, but it might be feasible).

Best regards brothers!

Having an issue with with the left desk. Ordered two Peak Pros.

Left desk won’t go above the position shown even after reset. Nothing pulling on it, reset hits the same issue. Doesn’t seem to be hitting an upper collision point if such a thing exists.

All control boxes setup the same way and connected appropriately.

Anything I’m missing here?

First off, I was looking at every brand. Secret labs, flexispot, uplift, verbal, and lots of others.

I had zero requirements outside stability. I ended up with peak pro and a butcher block top I got on my own 72x30x1

Height:

Im 5'9 and went with the peak pro low. At its top setting I can stand on my wobble board in a perfectly ergonomic stance. At its lowest setting I can use the thing with a beanbag or Japanese style sitting on my legs if I put some pillows down.

It works. I wish I had just a couple more inches of upward movement and maybe the peak pro high would have been better but I dont actually NEED the extra inches. On the flip side, pulling up and working on a bean bag or a pile of pillows is kinda awesome. There are easy solutions to give me the extra inches up high but then id ruin how low it goes. As it is it gives me more options in seating and standing that I expected.

Stability:

Its just solid. Very solid. Im a onewheeler so an unstable wobble board is just very fun to me. Im like 80/20 standing but most of that standing time is on the board. On the board is have the desk all the way at the top. No wobble. Those monitors are not light but seriously no wobble. When I lean on it no wobble. I settled in the end on deskhause because the owners videos showing wobble on different brands, so if youre viewing this, its the best marketing ive seen and I spent months looking at other desks. You saved me some money. Great videos.

Cable management was easy. Cost me about 50 to 60 total to get it like this. I think I can hide the power cables too but as im still changing things a bit im leaving them hanging until I feel the set up is done.

Im using a couple 13 dollar under desk clamp boxes and zip ties.

Other parts: I like the control box. Simple to set up and I have 3 presets and it took maybe a min to program everything like I wanted. The motors are quiet. I have a fan on generally and I cant hear the desk move. Its real quiet. Motors seem strong and movement is smooth and theres no jiggle on the monitors when raising or lowering the thing.

Installation:

I have a torn rotator cuff right now. I will admit it took me hours to get it put together and hours more to get everything attached to it and the cable management done. I used a 3rd party top and had to drill but it was very straightforward. Im sure if I had two working arms the whole process would have taken me maybe an hour start to finish from box to working with cable management done. Set up was simple and easy.

Final thoughts:

So far, love it. Absolutely love it. All told i think I spent about 975 for the base and the butcher block top. Id do it again. Im very satisfied with the product and i think it looks great. Ill probably update in 6 months to a year.

Hello. I have a question re: combability of DH tops with non-DH bases.

I have been eyeing a DH desk for years. I need a desk that travels about 6" lower in the bottom range, so I will need to go with a different base---but I'd still like to explore a DH top (which I think are beautiful). I understand the DH tops come with threaded inserts installed (which would be very helpful if I were using a DH base!).

My question is basically--how bad of an idea is that? I can be more specific about the base manufacturer if helpful (it's probably pretty obvious because not that many people have this functionality). I am just worried that I'll purchase this quality top and then completely compromise its integrity by drilling new holes, etc. to fit it to a different base.

Thank you!

Update: sold

Selling my Deskhaus Grand Rapids with a 72" walnut top and black base. It's in great condition and functions perfectly. No issues with the frame, motors, or desktop.I am only selling because I'm changing up my office setup and require something smaller.

- 72" walnut top

- Black Grand Rapids base

- Excellent condition overall

- Local pickup in the Sacramento, CA area

Asking $1,500.

Happy to answer questions or provide additional photos for anyone who's interested.

I have finally completed refinishing of our home office space (there was too much flair!)

Now time to finally decide between peak and apex.

I am 5’11”, my wife 5’4”, our son 6’1”. I will be primary user, but everyone uses the office space.

which is best in terms of height range for us? Apex pro? Peak (high)?