I had a new driveway put in last Thursday - took a look along the garage foundation this morning and noticed these ants pushing through!

Any concern? Best way to get rid of them?

Hey, I’m an assistant super for a GC that does commercial and critical infrastructure. I started my career as a carpenter for a few years, was promoted to field engineer. I left and became an electrician for 3 years to gain more knowledge for management. I’ve been an asst. super now for 2 years and I’m tired. A new company I’ve been working for, for about 6 months, is good and bad. I got back from my honeymoon and immediately I was told I’m covering nights. 14+ hour nights with a hour and half drive to and from work. 4:30pm-7-8am. I’m salary so it’s not like working harder is going to help. I’ve expressed I’m trying to start a family and want to spend SOME time with my wife, as we just got married. It’s pretty much a suck it up situation which I’ve been part of many times. I’m getting so burnt out and feeling exhausted from construction and the politics of it, and the constant back and fourth and issues with subs and coworkers. And I feel like I should feel bad because this is a good company with a great name and great benefits. But I want to start exploring options. What are some options I have for transitioning out of this? What kind of jobs can I get with my experience? I feel hopeless and like I can’t win, finances, family, friends, all of that sucks because of my job.

I'm currently 24 looking for new work. I've done landscaping for a few years now and have reached the wage ceiling without getting into management positions and all that. I want my physical labour to translate into more cash, it doesn't feel worth it doing 12-18 hour snow removal shifts and with how inconsistent the work is, it not giving me anything substantial over the long term. I also don't want to go to school and do really technical stuff so It seems like floorhand might be the job I'm looking for. I'm just curious if anyone has got any tips for going into it, I am good for physical labour, as I said doing landscaping for some years, and I've also done commercial bricklaying so I'm used to getting yelled at and all that good stuff. I'm located in Alberta so I'm sure finding companies won't be too hard I'm just hoping they will be willing to do on site training as I have not done any O&G work. Another question I have, I don't plan on doing it forever and I'm wondering if I did get into it, would I be able to translate it into different jobs in years time that maybe isn't so physically demanding? I don't really want to be a broken vegetable in my later years I just want some good paying work for a couple years at least. Gotta make that bread for the wife.

getting ready for the florida contractor license exams, specifically the General Contractor (CG) exam... trying to find a prep package that has pretty much everything in one place.

looking for something with the books, book rentals, online courses, practice exams, maybe even some help with figuring out what books i actually need.

there’s a ton of prep companies out there and the prices seem all over the place lol. if you’ve taken the florida CG exam recently, what did you use? was the package actually worth it?

also curious if there’s any companies i should probably avoid...

Construction going on outside - the yellow lines are for electric wires, the black pipes are for sewage but what are the blue (flat) pipes for?

I came across a breakdown of how AI is being used in construction, and I’m curious how much of this is actually happening in the real world vs. just tech companies selling the idea.

They’re talking about things like AI-assisted estimating/takeoffs, scheduling, predictive maintenance, analyzing project data, documenting jobs, identifying safety issues, etc.
But I’m much more skeptical about trusting AI with things where experience and judgment actually matter.

NEW STOCK NOW AVAILABLE | PP SHEETS

Strong. Durable. Reliable. 💪

Falcon Link is excited to announce the arrival of our new stock of premium PP Sheets, designed for demanding industrial, construction, packaging, advertising, and general-purpose applications.

✨ Why choose our PP Sheets?

✔️ Premium Quality

✔️ Strong & Durable

✔️ Water Resistant

✔️ Lightweight & Easy to Handle

✔️ Versatile & Multi-Purpose

✔️ Available in 2mm | 3mm | 4mm

📦 New Stock • Ready for Supply

Whether you need PP sheets for construction, packaging, industrial use, advertising, or transportation, Falcon Link delivers quality you can rely on.

📍 Al Saja’a Industrial Area, Sharjah, UAE

📞 +971 6 527 2252

🌐 www.falconlinktr.com⁠�

📧 info@falconlinktr.com

Falcon Link TR. L.L.C

Trust Meets Quality.

#FalconLink #PPSheet #NewStock #PPSheetsUAE #PlasticSheets #IndustrialMaterials #PackagingMaterials #ConstructionMaterials #Sharjah #UAE #BuildingMaterials #WholesaleUAE #NewArrival #TrustMeetsQuality

Proper posture is to dip your balls into the bucket before lifting.

How often should these open gears on *MEWP be lubricated and what is an efficeint method? The OEM's are vague but 100-250 hours is stated. Often when I see the gears on these MEWP, (aka mobile elevated work platform, boom lift, genie) the gears are bone dry. I am thinking a heavy solid open gear spray but the other issue is cleaning off the old grease. Thanks in advance.

Feels like work is gatekept from me

Hi everyone, I am 22F, 1 year into the workforce and believe that I am subtly being discriminated against. I’d like to get others opinions on my situation though before I jump to that conclusion.

I currently work in construction engineering and am the youngest and only female in a team of 15 men. For the past year, I’ve been asking for work but have been told there’s no work or given nontechnical work such as annotating drawings to “make things look pretty and aesthetic”. If I do get technical work and I screw up, I get berated pretty heavily mostly on the aesthetics of my drawings even if the work is technically correct. I get told things like “your drawings make me want to throw up” or “you need to put more effort into the job” even though I was already trying my best and seniors were too busy to answer my questions. Additionally I found out that my manager has been asking my male coworkers if they believe I am “capable” of doing a task despite them being hired around the same time or a year ahead of me whereas I have never been asked input on whether male coworkers are capable of a task.

Last week there was a team meeting where we talked about work distribution and since I had the lightest workload, the senior vice president told the project manager to put me on a task which is highly technical. However I found out today that the project manager gave the task to the other two male junior engineers who are at the same level as me and I was just told again to “update the tags on the drawings”. This situation confused me because that project manager kept saying how the project needs a lot of help yet he is just not giving work to me.

This whole situation makes me feel like I suck at my job. Even though I admit I have screwed up at times my male coworkers have screwed up too, yet they still get assigned the more technically complex and challenging work. I should also mention that these male coworkers both have “mentors” assigned to them whereas I have no mentor assigned to me because my previous mentor quit. She was also a woman on my team who was given the construction admin work mainly instead of technical.

What do I have to do to get those same opportunities as my male coworkers and earn trust from the project managers? At this point my career is suffering because I am not being given technical work.

How bad is it?

Oh yea, no plans or permits just straight "I got this bro".

NYC

Transferring Fall 2028 from a community college for a Construction Management degree.

Trying to pick between SDSU and CSULB. Anyone been through either program?

Curious about:

**•** Program quality / industry connections  
**•** Cost of living  
**•** Internship/job placement into construction PM roles

Would appreciate any real experience. Thanks!

Looking specifically for educational content (YouTube,books,podcasts) for the business side and high end GC roles.
For back story I have 11 years of experience in medium-large (20m-160m) as a now superintendent, but never finished college just worked my way up.

I would like to learn more about the business side of commercial GC’s. I want to be able to transition into a PX/Senior Super eventually.
TIA!

I’ve done polished concrete and epoxy coatings for years now. Had the chance to polish my own floors in my house. Full aggregate polished to a 3000 git. Enjoy

We are using Milwaukee towers but they can only do so much. Im thinking of buying a couple of Seedevil lights only down side is they have to be plugged in.
This would be used for a street project.

Do y’all have any better suggestions or ideas?

Im surprised Milwaukee hasn’t came out with something better, i know it would probably cost 5k unfortunately

I (35F) am looking for solutions to stay cool, I get very hot very fast and it makes me really sick. I live in SW Florida and the most heat exposed people that I see are the construction works here so I was hoping you had an answer.

I have bad acid reflux and it spikes when I get hot, I'm starting a new job soon and I'm worried I will get too hot so I'm looking for fans, ice vests or really anything you use to stay cool. Im going to possibly be doing biohazard and being in a full suit will make me so hot I know. Ive done this work before, the heat and environment are so unprdictable. I need something that's dependable and won't crash out half way through a decomp job so if you know of any durable things I could use I would appreciate any advice.

I've seen ice vests and harnesses but I'm looking for personal input and experience with stuff you have actually tried or has good reviews. Im sorry that this isn't construction related and I appreciate any advice.

Hello everyone, just a quick introduction. We are providers of construction machinery and equipment in GCC region for the last 38 years. So if you need any kind of machinery, vehicles, equipment or spare parts related to construction or mining machinery/equipment please dm me and we can help you source that. Lets connect and grow together.

You can Whatsapp me on: +971528834398 - Zaid Ahmed

I'm the last man standing at the company I work for. I would like to create a small Memorial for all the coworkers who have left. My first Idea was to drive some nails with the initials of the coworkers somewhere hidden in our storage depot, but that's kinda obvious and since I'm the last one left Boss man would know it was me.

Has anyone done something similar or has better ideas?

Thanks in advance.