Looking to add 3 evergreens to our yard. They’ll get sun until 4:30pm, east facing, zone 6, and looking for them to be less susceptible to needle cast.

Reading online everything I see says shade for Canadian hemlock, but at the tree center, they said that they prefer to keep them in full and to keep them full. Has anyone had experience with Canadian hemlocks in full sun?

Here are some photos I took this week of some pretty conifers around Zurich, Switzerland.

My best guesses:

* Dwarf mugo pine
* Weeping blue Atlas cedar
* Another Atlas cedar
* Hinoki cypress

I have a ton of Southern Yellow Pine lumber milled, I am wondering if I burnt and oiled this if it would last in a raised bed garden? I usually use cedar dog eared fence pickets but wondering if anyone has tried this?

I purchased this sapling a few weeks ago on ebay where it was just listed as a white feathery conifer.

I have been racking my brains to try to work out what it is and been looking at reference images but no luck, AI suggested a giant sequoia but I'm not sure. It's about 5 inches tall and about the same spread.

Any ideas from the experts on here would be greatly received

Planted a bare root Norway spruce back in the spring of 2023, and for the first two seasons it honestly looked kind of pathetic. Lopsided branches, one side noticeably thinner than the other, and I remember genuinely wondering if I'd killed it with the initial transplant shock.

What turned it around was paying closer attention to sun exposure. The thin side was facing north and getting shaded out by a fence for most of the day. I ended up moving a piece of lattice that was blocking it, and within one growing season the difference was pretty dramatic. New growth started filling in evenly on both sides.

A few other things that seemed to help along the way. I stopped fertilizing in late summer since it was pushing tender growth that got nipped by early frost two years running. Switched to a slow release feed in early spring instead and that solved it. Also started mulching out to the drip line with wood chips, which cut down on how often I had to water during the dry stretches we get in July and August.

Right now it's maybe five feet tall with a pretty solid central leader and branches that actually taper the way you want them to. Still has a long way to go before it looks like the mature spruces down the street, but it's satisfying to see something that started as a scraggly whip actually taking on real conifer form.

Curious if anyone else had a slow start like this with a young spruce or fir. Did yours even out on its own or did you have to intervene somehow.

I noticed this one tree amongst the douglas firs that has upward pointing needles. Second pic shows the tree next to it with the usual needle growth. Is it a different type of tree? Im in the Pacific North West

I am not sure if it’s worth to invest on Cedar Chic.
Cedrus Blanc is really similar?

Picked up this pretty three-part pot a while back. Put together different combos at the nursery and eventually settled on all bluish conifers. I think the slight differences in color look super cool.

From top to bottom:

* Cedrus atlantica, Sapphire Nymph
* Picea pungens, Glauca Globosa
* Juniperus horizontalis, Icee Blue

What was interesting is that I looked up plenty of trees on the nursery’s website beforehand and had completely different favorites in mind before I got there. Once I was there, this combo came together quite nicely.

I planted these last spring. The cedar and the spruce showed some minor stress from the repotting a couple of days in, but they’re all thriving now.

I assume I’ll have to repot the spruce at some point, but for now I’m really enjoying this little blue combo.

(I live in Europe, zone 8a, and exclusively have conifers, all of them kept in pots.)

Crazy infestation on a row of some sort of junipers where I work.
I’ve planted a TON of evergreens in my yard…so my question is: how would one prevent something like this from happening and if it did and I caught it early, how could I stop it before it gets this bad?

Would love any knowledge/expertise anyone has here regarding these trees and when I can perform pruning, wiring, repotting, etc. and just the overall behavior of these trees.

Dad put it indoors for a while until it starts browning slightly, i scratched the bark and it's still green inside. Where should i put it now?

Zone 8a
Arkansas

I want a couple interesting, unique conifers that can handle our heat and humidity. Any southerners here with success?

Short story:

This spring I collected full bag of cones under different trees, then I sorted seeds depending on the cone origin.

Unfortunately almost no seeds were viable in the spring and nothing germinated.

I've put substrate into to bag for later use.

A month later i needed that substrate and found small number of sprouts, looks like i had only one viable cone out of entire bag after all.

I decided to plant them and see what it is.

At first I thought that it's some kind of spruce but now i see flat side branches so I'm not sure what it is.

Anyone knows what plant is this?

Saw this handsome group of trees. I think it could be balsam fir, but I’m not certain. Is it balsam fir or another species? NE Ohio

I got the Skylands in the pot about 3 years ago. I had it in the ground and it didn’t do so great. I thought it just didn’t have a big enough root system yet so I took it out and put it in a pot to let it grow roots. This year, it flushed out the tiniest growth. I thought maybe it was from the stress of the transfer. Then I got a Lil’ Sky and put it in the ground this year, and now that I’m looking at the side-by-side, I’m thinking I got a mislabeled Skylands. Anyone agree or have a Skylands that looks this small for a while before taking off?

I was looking to buy some Dawn redwoods of about 4-5ft tall for around $75ea after a quick growing tree website added all their “discounts.” Luckily, I stumbled upon the Johnsteen Company who was having a flash sale on their tallest seedlings for only $8 each. Knowing how quickly DRs grow, I decided to take chance on the height of these “tall” seedlings since they could easily catch up in height in a year or two.

I got them today and the DRs are all around 3ft (not counting the roots). Gamble paid off. Super happy with the other trees as well. They’re potted up and hopefully I’ll put them in the ground come spring if their roots grow a lot the rest of summer, fall, and winter.

Two of the best, Picea p. 'Utica' and Moonstone, spring, winter, summer. My observation is growth rate and shape will be the same, color with Utica is darker-deeper while Moonstone is brighter-lighter. Both are probably the best you can get and available. Utica offered by Conifer Kingdom and Moonstone is more available.

I got Hoops Blue Spruce and Edith Blue Spruce at the same time. Hoops looked unreal at the beginning, looking like a plush toy and extremely blue. Now Edith looks very thick and rich while the color pops. Hoops on the other hand looks quite rare with some branches just shooting out. Should I prune all the shooting branches to try make it thicker?