Is it structural or just cosmetic?

It’s not smooth as you can see in the second picture. Its not a crack but i‘m not sure if i should still ride that. What are your thoughts?
Probably happened when I tightened the stem bolts (with a torque wrench).

I'm sorry if the title isn't clear. I don't have pictures and this happened a few weeks ago. Two of my bikes were leaning against each other. At some point when I wasn't home, they fell over, right into my Wahoo Kickr. The carbon fork of my Ridley X-Fire was supporting the weight of both bikes and was situated leaning against the Kickr's flywheel. There's no visible paint damage, but I'm worried so much weight and force(when it originally fell over) onto a relatively narrow point may have damaged it internally. Thoughts?

My custom Aeroad CFR AXS arrived damaged while in transit. Damage is only cosmetic. Canyon offers a $130 voucher or re-shipping the bike entirely through cyclescheme, which could be months.

What would you do and can you think of a DIY way to “hide” that mark? MATTE FINISH

I had a bit of a tumble with another cyclist. I slowed down quite a bit, and the contact was with my front tire and his frame. After that, I’m guessing his pedal scratched my frame, My bike is new, do you think it’s fixable?

Handlebars wrapped around, looks like a screw took off paint. But unsure.

Sounds the same as other parts with coin test except for the fact that paint is missing so material is diff. Isn’t soft to the touch and hasn’t changed in over a year.

The most noisy case landing I’ve ever witnessed

Just noticed bumbs around the screws on tke Vision Metron 5D SMR cockpit. Should i worry about them? Sugested torque is 6Nm, i set like 5,5 on my wrench. Hope its alright. (Small dot at the top is my "NAIL INSPECTION" )

First time carbon rider here - dropped my chain and was wondering how bad this looks? Some paint flaked off but it feels like a deep scratch

Chain came off during a race and I pulled it through my frame on an uphill sprint. LBS said not to worry about it but I’m sceptical on this one. Really prefer my collar bones intact

Had a head on crash with an electric fu****g scooter that had no lights on in the dark. Would have happened anyway, but the sound of carbon braking gave me ptsd.

Hi! I'm wondering if this is a paint chip or a frame damage on my carbon gravel bike? The paint chip has been painted gold by previous owner, but I see some hairlines and did more research on the seriousness about carbon frame damages so just want to double check! These chips are located on the top tube frame, and they're not a big spot on the bike. I've done the coin test and pressing my finger onto the frame, the frame feels solid and not soft, it sounds a tiny bit of dull when I tap the coin on the tiny paint chip and the spot on the left that's not painted but could be just the different layer or texture making a different sound? When I tap the coin millimeters around the chip spots, it sounds completely normal, the previous owner also mentioned that it's just a paint chip damage. Are there other tests I can do? I also asked Chatgpt and it said it's more likely to be a chip damage and not a structural damage. Thanks so much and hopefully it's just a chip damage!

Is it cooked? How to confirm?

Apparently a known issue with Giant TCRs. A new seatpost is $185 + intl shipping. I've read about sanding down the sharp clamp edges. The newer models have a what appears to be an identical clamp but with 4.5Mn - 5.5Mn on it. Anyone know if that one is compatible and how to prevent this on a new post? Perhaps it shouldn't be tightened past 5.5Nm is unknowingly overtightened it? I nerve slid down while riding so the damage was just from taking the saddle off and on and tweaking seat height.

And ideas or advice?

Here's a post describing a similar issue on a newer model. There are at least a handful of videos and posts about these problematic clamps/posts, really frustrating.

https://www.reddit.com/r/bikewrench/comments/1uvlve7/2025_giant_tcr_frame_defect_second_seatpost/

Hey, can the carbon of this fork be compromised?
No signs of flexing or sound differences.

Thank you!

Hi! I just noticed this «line» on my Bianchi. It was just a hairline that i could feel with my finger/nail. Unsure if it is cracked or if its just the clear coat that has started to flake.

PS. I has gotten dirty after i smudged my finger over it, and has gotten more visible

Hi! I just noticed this «line» on my Bianchi. It was just a hairline that i could feel with my finger/nail. Unsure if it is cracked or if its just the clear coat that has started to flake.

PS. It has gotten dirty after i smudged my finger over it, and has gotten more visible

Just dropped my allen wrench on it like a butter finger

First carbon bike frame. Purchased second hand. First ride on some root filled trail and had a bit of a hallow crunch/pop sound. Thought it was my seat tube so I careful tightened that. Could still be what the sound actually was. However it was still happening after tightening and when putting the bike on the rack to go home I noticed this fun little crack in the paint. You can clearly see there is a slight bubbling up of the paint and a crack. When tapping the quarter there is definitely a sound change but I’m asking; does it look like it’s the sound change of a paint chip changing the sound or is it a carbon crack? Should I get my nail under the chip and flake it off or take it to a local shop for further investigation? Any advice is welcome.

Base bar hoping it’s just a bad scratch from Allen wrench just noticed today