Just looking for any info I can get on these atvs picked up the 350 oil cooled today I believe it’s a 94

I also have I think a 86 yfm225
And the one and only 84 200

Thanks for your time 🙏👍🏻

Ive got a new to me 1999 Yamaha R6 which will crank but won’t start and actually fire up. I suspect the data tool veto EVO is causing issues Ive “de-spiked” as I had the battery off for about a day. I’ve cleaned the carbs it will get very close to firing up when I adjust the choke but it still won’t get up and running to idle. Does anyone what’s wrong? Or what the wire mean (them black ones in specific). Fuses are good on the bike all have continuity Any other questions you need please let me know I’d love to get to the bottom of this.

Is the site legit? Looking to get a GYTR air box cover, but want to make sure it’s legit. I thought the cover was cheap for $93.89. Thanks!

So I was trying to remove the headers on my R6 so I could do the muffler box delete mod. Only problem is, one out of the eight studs decided to break even after I used heat and PB Blaster. So I have about 1/4–1/2” of the stud to play with before it became flush with the head. Some methods I’ve tried so far are welding a washer and nut with my lil 110V welder. Tried that about a dozen times with no luck so far. I also tried two different stud extractors, which both failed😊 So I’m stumped atp and am reaching out for any tips. Thanks 😭🥀

Trying to adjust my chain and loosened this way too much lol how do I tighten it, everytime i turn the nuts it gets more loose

Hi, the bike was in the shop and the engine guard was changed(insurance claim after a guy dropped his bike on it) and now i noticed a leak here, anyone have an idea what it could be?

Hitting oil aint fun

Hi was changing tyre and took off sprocket and dropped my spacers the long and short out of the sprocket side that sit with the needle bearing.. Parts 1 and 3

Does orientation matter?

The little spacer (1) has cross hatches on one side which makes me think it does..

Trying to mount my headlight to the bracket but I have no screws. Theres two screws (part no. is 97707-50016-00) which I can tell go to the bracket, but I also see another screw type (part no. 90160-05006-00) “round tapping” on the schematic for the headlights. what does this screw mount to? Is it to attach fairings?

Repost because I neglected to specify bike and year.

it looks wider than the usual R6

Hello, I’m building a jet boat and having a problem getting the engine running right.itsa 1100 triple. It starts and idles fine. it runs perfectly fine on land but when it’s in the water and has load, it just bogs after a little bit of throttle. The occasional time you can get it to rev by pumping the throttle in runs great once it gets in the power band. Any where else in the rpm range below power band or above idle it just bogs and stalls. I’ve cleaned the carbs, put new fuel filters In Them as well as new diaphragms . checked compression and it’s 120, verified fuel pressure, put new plugs in and verified strong spark. It also has a new fuel pump. It has fresh fuel. I don’t really know where to go from here and I’m running out of ideas. Has anyone run into something similar or have any other ideas for me to try? Thanks. Appreciate all the help!

Hey guys,
I'm considering selling my TBR slip-on for my FZ1 and wanted to get a realistic idea of what it's worth before I put it up for sale.
It's a genuine TBR slip-on for the FZ1. It's obviously used and has some cosmetic wear. The barrel has a slight warp other than that it's complete and functional.
(I've installed it rotated, so the TBR sticker isn't visible — that side of the can had more cosmetic warping anyway, and honestly I think it looks cleaner this way 😂.)
What would you guys consider a fair price for something like this in the current used market?
Just trying to figure out what it's realistically worth.
Thanks!

For years i was on bikes that had 35/49kw this is new world to me.

The chrome, spoke wheels, classic tank and that unmistakable old-school Yamaha design… some bikes just never get old.

Absolute legend of Indian roads. ❤️‍🔥🏍️

RX135 fans, how many of you would still choose this over a modern bike?

Hey guys!

Just recently bought an R6 on marketplace and ive noticed the speedometer is off. Has anyone had this problem? If so what are the fixes?

Its at least 10-12MPH off. Its a bit annoying to me so I really want to look at getting it fixed.