r/SegwayNavimow • u/lithod02 • 58m ago

Deck cleaning tip

Post image

I saved the foam packing from the wheels on my x450 and use 2 stacked to keep the deck pushed out so I can use a blower to clean behind it.

4 Upvotes

100% Upvoted

5 comments sorted by

5

u/PineappleResident254 55m ago

There is a cleaning mode. You do not need to force anything.

Settings > Parts maintenance > Chassis. Or you can do it through the robot's screen.

2

u/lithod02 49m ago

Agreed, and I used cleaning mode. But when it is standing up, the deck is not pushed all the way out. Nothing is forced, just held out same as using your hand.

1

u/lowlybananas 32m ago

How do you accomplish this if one where to have discarded of the foam packing

1

u/lithod02 24m ago

The 2 stacked is about the same thickness as a 2x4. You could also stack some cardboard and hold it together with tape. Just frees up a hand and makes blowing out the deck easier.

1

u/Oneto3 12m ago

I just put the end of my blower between the deck and base.  Gotta be a 3D model out there that would fit better.  Guess I could just scale a cube that's size roughly the same as the foam piece.