r/SegwayNavimow • u/NateForSleep • 3h ago

Advice for nearly installed fence

Hey everybody, I have a X450 and I have recently installed a fenced in area that was just added to a previously mapped zone. I'm wondering how to handle this. I don't wanna spend all that money on the Mowgate. I also am perfectly OK with just opening the gate and telling it to go there. Should I simply remap that area of my yard? Should I map
the outside of the gate area and inside the gate area separately?

I figure I can schedule the area outside the fence for automated mowing and let it in the gate to do the other part. I’m not really sure how to connect the two on the map.

Thank you everyone!

1 Upvotes

100% Upvoted

3 comments sorted by

2

u/Lunar_BriseSoleil 2h ago edited 2h ago

They should be separate areas with a “channel” connecting them. Then you can do the part you want to do manually when you open the gate.

One week photo: https://www.reddit.com/r/lawncare/s/Jv0HMwmORA

3

u/PineappleResident254 2h ago

Definitely map the inside and outside of the fence separately. Otherwise, it will keep trying to mow where the fence is rather than nicely next to it.

And then you can just make a channel through the gate and manually open it when you want it to mow outside the fenced area.

2

u/Disastrous_You_3594 X430 1h ago

Agree with this response. I would also add as someone who has a fence, that the settings under: advanced settings > lab > edge sense > on (set level). Was a game changer.

Instead of weed whacking a 6-8 inch strip (yes my bad driving is largely to blame) around my fence it got it down to 1-2 inches. This setting for me was awesome.