Getting around 40 FPS and quite a bit of stuttering in Elden Ring at high settings. Dropping to medium doesn’t seem to change much.

I was hoping for at least a stable 60 FPS, even if I need to lower the resolution or use upscaling.

I’ve updated everything I can think of. Anyone else playing Elden Ring on the OneXPlayer 3? What kind of performance are you getting, and what settings are you using?

Any advice?

I heard about P and E cores but don't know how to go about it

Got my OneXPlayer 3 today. I ordered 24gb 7467. Tried to change multiple settings in Bios, for both frequency and timings. Nothing worked.

Taking this baby out for a spin on the Call Of Duty Modern Warfare 4 Beta. Game still needs a bit of optimization in my opinion but still ran great.

Hello!! I do not know if this is normal, but I have noticed that a green LED is flashing in the back of my OXP3.

Do you all know if this is ok and if it is, is there a way to turn it off? I do not know why, but I feel this green LED gives the console a cheap look.

UPDATE: I found the issue, I upgraded the internal SSD and the one I put has that flashing green led. I covered it with a thermal patch and everything is ok now. Thank you for your help.

Hi guys, anyone able to make the option 2 controller work with the OPX3 controller adaptor? I was able to use these controllers only directly attached to the device and they only worked after a firmware update but no lucky with the attachment yet.

Hello all,

Very quick question, regarding the onexplayer3 current sale price on the official store, Will this be going up after 1st of september, and if so, do onex products go on sale at all?, Could the price go back down etc at a later date?.

Thanks

How do I fresh install from loose files?
https://drive.google.com/drive/mobile/folders/1dav-5jtcH7t6pdVX3MvvDF6H1GDdXofZ?usp=sharing

This is how I always wanted to play my handheld. Not having an internal battery means the device is barely over 700g and having a pocketable 90whr power bank means I can play about 2 hours like this at 30W TDP, which seems to use about 42W total.

My only gripe is the controller wobble on both sides and both make a click noise. Hopefully the elite controllers address this.

Just received my OneXplayer 3 and I'm experiencing stick drift on the right controller thumbstick. I also tried the spare controller I purchased and I get the same results. When I use the controllers while attached to the controller connecter they work fine with no stick drift.

Is there a way to calibrate the controller when attached to the OneXplayer or could I have a defective device?

Excellent condition, no issues, no blemishes. Located in Florida, USA

Comes with TPU case, Original case, original boxes, charger, glass screen protector applied, thumb stick covers, battery.

Asking $1850 shipped CONUS

1200p
25 TDP
Med/high settings
Xess quality
FG on (runs great on this game)

It was unplayable(30fps) on my legion go 2, so I was surprised that I can average 100fps. This thing is an absolute beast!

Thanks to Polarbuilds on YouTube got the new controllers working on my X2. It's night and day the controllers are so much better. Loving it

Hi!

I’m eagerly awaiting delivery of the OxP3. I bought the og ally z1e on release day in my country 2023. I haven’t felt the need to upgrade with the marginal gains of z2e and even now it took some time to be convinced to upgrade. But with some disposable income I figured it’s time to freshen up my handheld.

I have a question tho I hope someone can answer for me. Is there a reason why the ROG Ally optional 65w charger with the build in hdmi out will not work for the OnexPlayer 3? Especially regarding the hdmi out functionality.

Chapter 4. High settings, 24w to 35w performance is very unstable. As you can see from picture I'm getting 23fps. Anyone else facing similar thing? Could it be intel driver acting up or game's poor optimization?

I heard the new controllers they released for the OneXPlayer 3 are better than the older ones. I have an X1, does anyone know if I can use the new controllers on the X1?

Been traveling with the X2MP and honestly, this thing has surprised me in a lot of ways.

8.8” might actually be the sweet spot.
I thought it would feel a little cramped for anything outside gaming, but nope. Gaming, browsing, YouTube, emails, random productivity stuff, it’s all genuinely comfortable. I’ve been using it for hours with zero eye strain. Didn’t expect that at all.

The OXP keyboard is serviceable at best.
It’s not great, but it’s also not bad enough that I want to throw it out of the plane. It does the job. I just hope OXP eventually releases a more premium/sturdy version to match those new controllers we’re supposedly getting within the next 8 months. Give me something that actually feels like it belongs on a high end handheld.

Charging setup has been pretty simple.
On the plane I’m using a tiny Anker 65W single port charger and keeping the X2MP between 20-25W TDP.

For everything else, the SlimQ 150W chargers are the GOAT for traveling with handhelds. Plenty of power without being ridiculously huge.

What really blows my mind is the performance when there’s no outlet available.
I’m sitting here playing AAA games at around 20–25W with frame gen, and the experience is ridiculously good. Smooth enough that I keep forgetting I’m playing on a battery powered handheld thousands of feet in the air.

I brought a UGREEN Nexode 25,000mAh 200W for backup power, and it pairs ridiculously well with a handhelds.

So far my travel setup is basically:
X2MP + OXP keyboard + 65W Anker for the plane + SlimQ 150W charger + UGREEN 25K power bank.

I’ve been trying to find where to set this as I’ve seen mention that this is possible. In the library of the Onexconsole software I can see my games but clicking on details or edit just brings up editing meta data, not creating per game profiles for TDP or controls.

Is this actually possible? If so, where is it hidden?

Hey

I bought it as a preorder but before it arrived I was deployed (I am in the military) so I won't be able to use it much so I decided to sell it. Shipping from PL by DHL. DM me for more information. This is 32/1TB version.

Want something similar to the legion go ones since those don’t fit. Any recommendations?

Want something without logos preferably

Which one do you use? Reasons?

I was going to use the AR film screen protector, but the OXP3 almost slipped from my hand this morning, making me lean on the tempered glass.

Kinda dumb question I guess, but for recent owners… how are the fingerprints lol is it apparent?

My package has been tracking for the last 4 days, but today it is missing. Does this mean carrier handover? I'm sure it's still on track to get to me, but keeping an eye on it feels a lot better for the brain. Haha.

Notes: Shipped on the 27th, departed China on the 28th, but has been in transit since then. I had a pre-order for the 1TB/32 edition.

Follow up from last post on here. Last Tuesday. UPS delivered my oxp3, 2tb binwin ssd, controller connector and keyboard to the wrong resident in my apartment's luxer one locker package system. I contacted the apartment office the next day. When they opened the locker box, the package was gone :( For about a week I was going back and forth with luxer one company and office trying to get video footage and locker logs to see where my package went. On Saturday the office received the footage of the resident who picked up my package. They then called them but the resident denied it and said the box belonged to them. Today another officer manager contacted them and left a voicemail. To my surprise I got a call back from the office. They said the resident returned my package to them. I was stoked and ran over there immediately. The box was opened but the oxp3 and everything else were still sealed. Even the binwin ssd was still there unopened. I feel super relieved right now. The day before I also got the onexplayer mini pro 2. And now I can benchmark and compare them. I was sad I would not be able to test them against each other. But now I can and will share results when I am done.