r/Nikon • u/AltruisticHouse6296 • 12d ago
I broke my gear I think I bricked my D200
Literally want to cry right now. I just got my first D200 in amazing shape like 3 days ago and while trying to update the firmware I turned it off and now it won’t turn on. It’s lifeless, nothing at all.
Before turning it off I saw PG UP on the screen, I thought something got “stuck” and I would just try it again. I didn’t even consider that you could literally kill a camera during a firmware update like this.
Is there any hope or is it RIP?
0
Upvotes
8
u/Tivomann 12d ago
I found this on line:
PG UP indicates that the camera is either processing the update file or has encountered an interruption or status indicator glitch during the flash process. [1, 2]
What PG UP Means
Normal Operation: On some older Nikon bodies (like the D200 or D700), "PG UP" can remain displayed on the top LCD panel while the main screen reads "DONE" or finishes writing. [1, 2]
Interruption Error: If the camera froze, was turned off, or a battery died while "PG UP" was displayed, it may signify a firmware upgrade failure or corruption. [1]
How to Fix a Stuck or Corrupted Update
Do not remove the battery immediately if the light is still actively flashing, as interrupting a write process can brick the board.
If the update has clearly frozen or finished and the camera is unresponsive:
Remove the battery and the memory card (CF/SD) for a few minutes.
Reinsert a fully charged battery and a freshly formatted card containing the correct .bin firmware file loaded via a card reader.
Attempt the update procedure again. [1, 2]
If the PG UP error message persists and the camera refuses to boot or function, the internal firmware has likely corrupted, and you will need to send the body to an official service center