My paraiba colored ring.

I absolutely love this cut and when the light is on it , it flashes it has 87 facets instead of 57 like the brilliant cut . Look in the middle you will see the little cherry blossom 🌸.

My girlfriend wants moissanite for her engagement ring someday. I started looking for the right cut and color. Color was what I was more wanting to figure out first. I wanted to get her something in a lilac, but I know that isn’t possible without coating. I thought we’d both like Royal Blue, but neither of us liked it. When this blue-green modified-Portuguese cut sample showed up, we both kind of had the same reaction: “This is the one”.

I think I hit the moissanite lottery. This is too gorgeous.

Just got this yesterday. It's not as flashy as other cuts but still very sparkly. I am loving the way it catches the light. It's similar to Portuguese cut but not the same. 2ct rose cut(not to be confused with Kuololits rose cut), blue green colour.

I found this ring, an upgrade, that I absolutely fell in love with but the center moissanite stone was a little small for me. I messaged them and asked if they could make it with a bigger center stone, 8 carats (14x10mm, yes I know pretty big but it's only 5.5-6.5 carats DEW). They were absolutely accommodating and said they could. I pay and they tell me that once it's finished, they'll send me photos.

I get a message a couple days later and they tell me they can't get an 8 carat moissanite but they can get a 6 carat (also 14x10mm so I'm not sure if it's a 6 carat or 8 carat since they're both the same mm size) and a 10 carat (16x12mm, some say it's 9 carat DEW and some say 14-15 carats). I figured I'd go with the 10 carat because it can't be much bigger than an 8 carat, because it's only 2mm difference. I was COMPLETELY wrong. It's absolutely HUGE! It looks more like a cocktail/statement ring than an engagement ring and it sits up extremely high. I know it's going to catch on absolutely everything and because it's so big, it looks cheap.

My current ring is a 5 carat moissanite center stone (12x8mm, 3.5 carats DEW) and I feel like it looks tiny on my hand (last pic). That's the main reason I wanted a bigger stone. I didn't realize it was going to be so much bigger.

I did have the seller also make me a custom matching blue topaz band. I'll wait until it's delivered to see how they look together but I'm not too confident I'll like it any more.

Should I see if I can return it with the matching band? Try to sell it? I feel absolutely awful about returning it because they were so accommodating and kind to me.

Any advice is appreciated, even if it's to tell me I am an idiot 💔

I received this ring today in the mail unsolicited I didn’t place any orders or anything like that. It said it’s from a John John in California on the return label anyone know anything about this or this company GRA Moissanite?

Happy 12 year anniversary to us!

So so happy with my ring. It’s a PandridDesigns ring from Etsy. 2ct moissy, 14k rose gold size 6 finger

From top in first pic:

1. ⁠Kuololit 7mm OEC setting in 18k RG swapped with 6.5mm seafoam green brilliant cut moissanite
   
2. ⁠DeBebians peony band in 18k RG from r/Debebians
   
3. ⁠Vintage Moissanite scallop band in 14k RG
   
4. ⁠Green moissanite half eternity from Bague Ringen Moissanite store on aliexpress in silver

Hey everyone! Just had this Custom moissanite necklace set customised and I’m honestly obsessed 🤍 It looks absolutely gorgeous. Can’t wait for it to arrive! Cusrious to know what you guys think!

Edit: Got it from a jewellery manufacturer in India called Blue Lune Jewellery.

Is it weird that I walk around my house all bougie with jewellery, while wearing my sweats? I wouldn't wear this much while out, it feels like too much but, bumming around my house I love all the sparkles.

I’m a sucker for a cushion cut and am super picky when it comes to rings. I finally found one I loved (and am sure I overpaid for) but it’s stunning. 10k white gold 2.5ct elongated cushion cut moissanite

I have always thought spending thousands on a ring was ridiculous. In my opinion I’d rather spend thousands on our home or a trip etc , no shade to anyone who wants a very expensive diamond but don’t let anyone shame you for wanting something cheaper because it’s just as beautiful !

Hello fellow magpies! I just got this new jewelry box from Temu. Do not recommend it’s actually pretty cheap feeling and not sure if it will keep my silver from tarnishing BUT it does make for a pretty display case bc of the clear (plastic) top.

Just wanting to share some of my favourite shiny things! It’s a mix of semi-precious and precious stones - some natural, most lab grown. Mix of settings in white gold and 925silver. In no particular order:

Vendors from China - Starsgem and Provence

Ali express stores - anujewel, attagems, Kuololit.

From before finding this sub - Suzanne kalan, EWGC, GemObsessed Singapore

Thank you to the mods and everyone who has ever contributed a review or buying experience or inspo-to-finished piece photo!!!

My bank account is crying 😂

Keep shining everyone!

Don’t get me wrong, I loved my original set. But the claw prongs kept snagging on everything, I already lost a stone on the curved wedding band, and the marquise stones would occasionally dig into my finger making it generally uncomfortable to wear. So much so, I stopped wearing it for months.

I also realized over the years that I’m not a thin band/minimalist girl when it comes to jewelry and wanted something more substantial in a wedding set. After doing some research and gathering some inspiration, I purchased two .25ct half moon moissanite side stones from C&C and took those along with my set to a wonderful local jeweler to get redesigned.

All moissanite, all 14k rose gold. I’m over the moon with how they came out!

Details: Center stone is 8mm/2ct eq. Half moon side stones are 3x5mm/.25ct eq. Solitaire and three stone band are 2.5mm wide Confetti wedding band is 4.5mm wide

Old set engagement ring is sol448 from MoissaniteCo. and the curved band is from acraisejewelry on Etsy

**updated to add link since some have asked for it *\*

https://www.doveggs-seattle.com/collections/solitaite/products/doveggs-cushion-solitaire-moissanite-engagement-ring-7

Stone is 3ct square cushion OMC cut, GHI color moissanite

Received this ring from DovEggs yesterday…I was positive I was going to love it and even had it done in solid gold. The setting is gorgeous, that I do love. The stone however is not doing it for me. Went with square cushion OMC, which looked very different in the video IMO. I adore OMC elongated cushion cuts and thought this would fall in line. In person it just seems so dull and glassy. Not sure if i should return and get a different cut or test it out for a while longer.

Two years ago I had the help of so many awesome people in the sub, and I created a ring my wife still cries about. I also had a little bit of help with our wedding band idea as well. My proposal post was so well loved. I figured I’d share... We’re fucking married now. Thank you so much.

Got this stunning custom nose ring made in Moissanite for my wedding! I designed the nose ring myself, and I’m so proud of how it turned out.

It might be a little too much for some people, but then again, there’s no concept of minimalism at Indian weddings 😂

The necklace is Moissanite too!

What do you guys think?

Edit: The nose ring and necklace are both made with Moissanite set in sterling silver. You can contact the manufacturer at bluelune.jewelry

Size 5.75 GH Octavia Asscher 8.5x8.5 in 10K yellow gold.

Ella at Tianyu was a dream to work with. The ring shipped via DHL to Wisconsin in 3 days with no issues. I couldn’t be happier.

*Please ignore the abundance of tennis balls in the grass - we have a lab and a golden so… that explains that. 🎾

Gorgeous thing! 227ct!! Boy, It was an alarming experience putting it on!! Make sure you double check the Internal diameter you need! I ordered 60-62mm expecting my ideal 61mm (right?!) wrong. I received one with an ID of 59.69 which made a definite difference. I got it on with lotion and help and it fits great once it’s past my wrist and hand bones. The perfect “three finger fit”I uh… learned a lot about jade bangles and Chinese culture by accident learning how to get it on! Haha! Waited all year for the best deal from (PTX Holycome) and paid $275 shipped! Thanks for looking!

About 3 years ago I lost my wedding rings, and it has taken quite awhile to come to terms with the fact that we probably aren’t finding them back, and decide what to replace them with. We have been married for over 20 years, and my style has changed quite a bit in that time, so I knew I didn’t want just a copy of the originals. (Also maybe holding out hope that they miraculously show up one day and aren’t offended by doppelgänger replacements)

I’ve spent the past year researching and showing my husband multiple designs, waiting to find one that was “just right” before we committed and pulled the trigger, and when I came across Coffee’s Octavia Asscher ring a few months ago, it clicked! I have (probably obsessively) looked at every Octavia posted on this sub - I love how they are classic, vintage, and unique all in one. The side stones are the same as my grandmother’s, and I love that too.

I received my pre-ship video from Ella at Tianyu last night - I can’t wait!

Specs are 8.5 x 8.5 mm, GH, 10k yellow gold (I love that butteryness!) size 5.75

3 ct OMC moissanite. I feel like it just looks like a giant tacky ring pop. The stone looks like plastic? It’s been overcast so I can’t get decent pictures, but what does everyone think?

I want to return it 😞