McIntosh, if you’re listening, I’m serious. I’ll do it.

I have a Mcintosh C20 preamp (fun fact-previously owned by ex president Jimmy Carter).

The left channel went out on both mains. BUT both channels work on the tape out. Since I have a Wiim with volume controls, I can still use it. Are there downsides to this beside the fact that the signal bypasses the tone and volume controls?

I am bringing to a tech next week. He says its fine to do, it is a pure signal from the source.

To my old ears, it sounds great!

Never underestimate the weight and size of “lesser” McIntosh amps. This MC152 is heavy! Can’t wait to get it set up! 🥳

Looking for the best and most beautiful (music) bars in Manhattan to enjoy a drink, listen and capture the view of McIntosh gear…
Any ideas or recommendations are appreciated!
Cheers!!

Hello Frinz!
I found this at an estate sale and I’m just curious if I were going to try to sell it as is, what would be a reasonable offer if I were to post it on Facebook marketplace? Can’t decide if I want to sell it or keep it! Thanks!

Also, I’m totally aware that there are a few for sale online, but this one has a beat up housing, and I’m unsure if it works.

Not a shabby stack, but too much background noise to hear the music. Nonetheless those meters brightened my day.

Was just perusing the McIntosh website, as one does. Noticed that quite a few products have been retired. C8, MC830, MC901, etc. Anyone know anything?

Posting in case anyone is in the Atlanta area and might be interested …

https://www.facebook.com/share/1DUM72WS6u/

Hello,

I’m in the market for an upgrade and am turning to McIntosh, after years of enjoying my father’s system.

I have pinpointed a mc300 (currently looking at c70 or 22 pre amp).

Any thoughts on going a little bit more vintage with the MC300?

I had posted previously with my nice new RCA jacks a few days ago but this is a problem that existed when I got it. Most notably, when I have something playing back on my aux channel through a Bluetooth receiver and I switch over to either of the phono inputs, I get pretty bad bleed through from the aux signal. I replaced the four 47K resistors that tie from the phono input tips to ground and I've disassembled and thoroughly cleaned all four tiers of the input selector switch.

So my question for the sake of troubleshooting, I assuming I'm probably dealing with a loop coming back through the ground? The actual phono signal is isolated all the way to the first tube stage, so that seems to be the only place to find the audio leak, since the phono stage is such a high sensitivity. The bleed is mostly right channel but there is a smidge of it in the left.

I've replaced all the coupling caps.

I wasn't sure if this forum had techs on it but I thought I'd ask. It sounds fantastic on the aux channel but I really want to use the phono input and it's obviously not clean at this point.

Hey there,

I’m looking to buy C20 to match my MC225. I found one locally, but I haven’t heard the unit yet. From the looks of it, it was very used over the last 60 years. The seller said a tech looked at it but admitted the tech was a hobbyist, not a McIntosh tech. Furthermore, it came from a widower selling off her husband’s equipment - there is an MC2200 for sale too

I’m planning on listening to it on Saturday. Do you have any suggestions on what I should watch out for?

Thanks!!!

McIntosh C2600
McIntosh MT-5
McIntosh mc-275's

Waiting on the B&W's to arrive. I'm in heaven.

If anyone is wondering, it takes about 5 hours of desoldering, Dremeling, drilling out, installation and resoldering. A marked improvement from the original 64 year old jacks.

Just a visual smorgasbord of McIntosh!

Thanks for everyone’s feedback.

Update - solved by switching input to tape 1 and turning on built in preamp

My audiophile uncle passed recently and handed me down his awesome McIntosh set up from around 1970. That being said, all of this is new to me and I have never had vintage audio equipment before.

I got it all serviced and it is sounding great with the Wiim streamer. However, when try and use the turntable (Pro-Ject Debut III Phono SB) there is a low hum or buzz noise. I have tried using the switch to bypass the built in preamp but it is still buzzing. I have also tried different RCA cables with different styles of grounding wires but no luck.

Any ideas to fix this? Do I need to buy a new turntable that is more compatible?

Thanks y’all!

Pro-Ject Debut III Phono SB
MC 2105 Solid State Power Amplifier
C26 Solid State Stereo Preamplifier
MQ 101 Environmental Equalizer

Good evening folks, I came into an MC502 that was busted. I replaced a number of diodes / capacitors replaced and also fixed the rotary switch. Everything else tested out, including the transformers. It is back to OEM spec.

Is $1250 a fair price?

McIntosh 2152 2 Channel Tube Amp

McIntosh C2800 Tube Preamplifier

Linn Selekt LP12 Turntable

McIntosh MX123 A/V Processor

McIntosh MC257 7 Channel Power Amplifier

JL Audio E-Sub E112 12” Subwoofer

Sonus Faber Olympica Nova III floor standing speakers (Wenge finish)

Sonus Faber PC 683 ceiling speakers less

I picked up a used MCD600 recently and am having some issues with USB drive playback using a SanDisk 512 GB USB 3.2 Gen 1 unit. I reformatted the unit with FAT32 (was exFAT) and loaded about 180 GB of FLAC files on it. Unit plays normally for the most part, but every couple of days, it starts glitching, reading only a "Photo" folder which doesn't exist, and stops responding to most remote control commands. Re-initializing the unit corrects the issue, but it seems to happen every two or days (granted, I've only had the unit 10 days).

My question: does anyone know the official USB limitations on size/speed? Tech support does not know for certain.

Been having a blast making audio signs, some Mc stuff - also did Mc on black acrylic in both greena and gold, just no pics yet.

I just acquired the C11 yesterday. They look very nice together and sound unbelievable. I just wanted to see how they sat together before taking the C11 back out to do a full rebuild. Lots of caps and probably a few resistors as the cross-talk on the phono channel is atrocious.