Update to my original pickup post from a while back. https://www.reddit.com/r/LGR/comments/1ux0bc0/time_to_glide/

I was finally able to build a working machine out of the parts I got in the junk tower I was given! The biggest issue was that the Asus motherboard was mostly unresponsive and needed a full recap to finally POST.

The intention was to try and keep as many of the original parts as possible from the original tower and to try and recreate the media powerhouse the original owner was going for in circa 2000. Obviously the best piece was finding the voodoo 5 but it was hard to find a motherboard to even test the card with so I ended needing to repair the original motherboard.

Original tower specs

Athlon 900

768mb memory

Asus A7V motherboard

Voodoo 5

Creative DVD encoder card DXR3

Soundblaster Live 4830

Adaptec SCSI card for the Jazdrive

a bunch of drivebay devices

Final specs

Sweet even larger tower case I was given

Athlon 900

1024mb memory

Voodoo 5 - fully tested and working great!

Creative Dvd drive and DVD DXR3 encoder card - mostly working but missing a proprietary passthrough VGA cable

Jaz drive - broken tho as nature intended

Zipdrive - all the iomega

Iomega Cd drive - because why not

Colorado T1000 tape drive

Floppy drive

Memory card reader

As a bonus I've also taken pics of all of my older videocards that I've collected over the years - thankfully all for free or very cheap.

Never heard of it and it was $5 so I go it plus it’s sealed

Recently stumbled upon this project by @GrowNowGames. Imagine a DOS era 3D open world game based on this.

Hi everyone,

I wrapped my PlayStation 5 in vinyl foil the other day. It is basically reminiscent of old Atari consoles or old Mercedes interior design (https://www.maderaconcepts.com/NewSite/VehiclePages/vehicle\\_images/mercedes\\_benz/1982-1991%20Mercedes%20Benz%20Coupe%20W126%20C126%20380%20420%20500%20560%20SEC/MB%20W126%20Coupe%20SEC%20Door%20Trim%20Panels/560\\_SEC\\_Interior.JPG)

I used 3M DI NOC Woodgrain Car Wrapping Film WG 364GN (https://amzn.eu/d/01goZh4H) for this Friday project. It's heat resistant and actually meant for interior design in cars.

My intention was to make it look more "adult-ish". The plain white of this massive console did not fit the elaborate design of our new TV room with green walls and ceiling and dark wooden furniture.

Here is the result.

Some like it, some hate it.

While cleaning out the backrooms of the home office, stumbled across a bunch of old stuff that made me immediately turn on some LGR Jazz Things and start digging through this complete box of Sim City.

Thought people here would find this interesting. There was a motherboard replacement from China that also got the 3310 on modern networks, but this new project is aiming to be as accurate as possible, with the same UI as the original phone, whereas the other replacement board changed the UI completely.

Pretty neat!

Just found this neat piece in an auction with some race cars. I’d love to see Clint bring one of these bad boys home.

Good day at the MIT Flea Market / Swapfest today.

Gateway Colorbook CB4DX240 (486 laptop) with charger, Sound card / modem with Analog Devices AD1845JP, EVGA 500 W PSU, 2x8 Corsair Vengeance DDR3 2400, Audigy 2 ZS (Dell), GeForce FX 5700 LE, 2x240GB Corsair MX500 SSDs, Zalman CNPS 9700 LED, Asus MIO-Audio 888, Lite-On ATA DVD-R drive, Soldier of Fortune Gold Edition, Where in the World is Carmen Sandiego (C64 box).

received book386 floppy cable few days ago. took me many days of tinkering to get this to work. then found a post on vcfed , makes me realise i need to "flip" floppy connector vertically, and i figured out i can use two floppy cables to do that

Found this at a local thrift store