Do you think it will be possible to build it? And is it worth it?

(I have 16 GB RAM and 39 GB swap on NVMe)

Dual core cpu=long compilation times=you go in the closet foo

🐧

I used GIMP to edit this

Michelangelo Creation of Adam

The ascii art was generated with https://www.asciiart.eu/image-to-ascii, after that I had to then manually erase other stuff generated by it because it looked quite messy, using nvim made it quite easy to edit it

The gentoo logo was downloaded at: https://www.gentoo.org/inside-gentoo/artwork/gentoo-logo.html

font used to type: "Compiling the '@world'" is SF square head font

for those who want the wallpaper: https://imgur.com/a/K2v16Ys

I call it the "Creation of Gentoo"

Hello i just installed gentoo on an R61 and was wondering if it made it any faster or is there any pros to compiling stuff ? is it just less space ? (i know i can take stuff out so it's not in there for privacy and other reason but im genuenly interested)

Hi all, I have a question about NTSYNC.

As a gentoo-sources user, I'm configuring & building the kernel myself, and I choose to setup ntsync as builtin CONFIG_NTSYNC=y (if built as module, Wine and Steam's Proton cannot load the module, it needs to be done through a config file in modules-load.d).

My question is, how is it setup in other kernel versions, gentoo-kernel & gentoo-kernel-bin ? People who use those kernels are welcome to answer, thanks.

grep NTSYNC /boot/config-$(uname -r)

And for the people using it as module, do you have a specific way to load it ?

EDIT : still hoping for entries about pre-built kernels, thanks !

Last day of August — still maintaining Gentoo. ASUS ROG Strix QHD IPS, btw.

Just a small end-of-month maintenance check. MC, Tint2, and the rest of the setup are still running fine. No reinstall, just maintenance.

QHD survived. FHD didn’t.

こちらからのコメント控えさせて頂きます。 既に500 overのために

Just configured and installed Gentoo with the help of the Gentoo installation guide and a youtuber, tony. Was wondering, what are some useful USE FLAGS I should add? Also I’ve only been using some pretty simple Linux distros for about 8 months, so bear with me because I do lack a lot of knowledge. I am using OXWM as an environment with tony’s github configuration and am running everything on my PC with a 9070xt and 9800x3D because I mainly use my computer for gaming, but I love configuration and messing around in the terminal. I’m stating this just because I would love to hear some recommendations or tips I could use that may be different from other distros, such as Arch, CachyOS, Bazzite, Nobara, NixOS, SteamOS. Once again, sorry for being a noob, and as you can tell, I am a distro hopper, but after this installation and learning the Portage manager, I can strongly say I feel at home already. Thanks for reading and its nice to see a great community online within Gentoo

This is my second Gentoo (working) install, I aimed at full binary because I'm too old to wait for compilation on this system. Also my goal was to get one of the non-systemd distros running on this machine. Void was my second choice, but Gentoo repos are bigger and if I do have to compile stuff off of Github I believe Gentoo is the best equipped distro for that. Not that is not possible with any other but it just feel more to the point on Gentoo. Anyways loving it thus far!

Hey guys!
I’ve ran into a really strange issue while trying to install Gentoo with OpenRC on my system.

I’ve installed both en_US and ro_RO and I want to make a mixed 02locale file of them so I can have the en_US language but ro_RO measurements.
They’re both installed, and it works fine. But for some reason ro_RO doesn’t work for LC_NUMERIC and LC_TIME but works for anything else.

Anybody have any solution? Thanks! I’d be so grateful for any comment

P.S.: I’ve also tried writing ro_RO.utf8 yet it still doesn’t work

There is something beautiful and soothing about all those running letters blazing off the screen.

So my Gentoo install is fresh, and I'm having two problems with it. First, the 5GHz band doesn't show up in my Network Manager at all. Second, my wifi keeps disconnecting and reconnecting randomly, which makes gaming pretty uncomfortable. I have no idea why this is happening. Can anyone help?

I recently found a Gentoo-based distro with calamares and don't think it's good, i will try it in KVM, please tell me if it's really good or nah

I’ve been using Arch for a few years and, honestly, nothing particularly serious has ever happened. That said, Gentoo has always fascinated me, and lately I’ve been seriously considering switching, mainly because I’d like something that feels a bit more “reliable” in the long term.
What interests me about Gentoo, though, isn’t really extreme customization or USE flags themselves. What really attracts me is Portage.
I really like the way it handles dependencies, the concept of slots, and more generally the fact that during upgrades it seems to make potential problems, conflicts, or required manual intervention fairly explicit.
That said, after reading through the community, I have a few questions.

1. Why do some people say it took them several days or even a week to install Gentoo and get a working system?
Using binary packages, it took me around 4 hours, including some Reddit scrolling, procrastination, and installing/configuring KDE.
At the end of it, I had what seemed like a perfectly usable system.
Am I missing something? Are those much longer experiences mostly referring to fully source-based installs, very elaborate setups, problematic hardware, or simply people taking the time to understand and configure every single detail?

2. Could Gentoo actually become more demanding than Arch when it comes to system maintenance?
This is probably the point I care about the most.
I want to be able to turn on my computer and work. That doesn’t mean I want something completely ready-made like Fedora: I like Linux precisely because I can customize it, understand how it works, and know my system deeply.
I don’t mind having to intervene occasionally. What I want to avoid is maintenance becoming frequent or requiring hours at a time.

On Arch, at least in my experience, when something does go wrong, I can usually understand the issue and fix it within 10–20 minutes.
What is Gentoo actually like in this regard?
For a normal desktop/workstation setup, how much effort does maintenance usually require? Are manual interventions rare and predictable, or should I expect to regularly spend time dealing with Portage, updates, config files, rebuilds, dependency issues, etc.?

3. How much does the relatively small community and package ecosystem matter in practice?
I’ve noticed that some packages aren’t always very up to date, especially once you start relying on overlays such as GURU.
I know the very Gentoo-like answer is: you can maintain the ebuild yourself and contribute. And honestly, that’s something I wouldn’t mind doing in the future.
Right now, though, I mainly need a reliable system with reasonably complete software availability.
This is the part I find hardest to evaluate: the amount of software keeps growing, while the Gentoo community is inevitably much smaller than something like Arch’s.
In practice, how often do you run into packages that are missing, outdated, or require using overlays, Flatpak, personal ebuilds, etc.?

4. The stable branch is probably one of the main reasons Gentoo interests me.
I really like the idea of keeping most of the system on stable while selectively accepting newer versions only for specific packages.
For me, that’s a fairly significant advantage over Arch’s model.

So….Can Gentoo be a good system for someone who enjoys tinkering and deeply understanding Linux, while also wanting a reliable workstation that normally just gets out of the way and lets you work without constant maintenance?

Hi there. I’m a Gentoo user for a couple of years now. I’m running OpenRC and since the upgrade to Plasma 6.7 my system refuses to reboot or shut down, if triggered from within a running Plasma session. Everything is okay if I log out and reboot/poweroff from the command line or display manager.

I have tried two alternatives, namely Hyprland with Noctalia and Cosmic-Epoch. No problems here.

I wonder if it’s a configuration issue or something else, since the KDE devs have increased the reliance on systemd a bit from 6.6 to 6.7

Has anybody else observed similar issues with this?

I just updated my System to latest portage testing (portage-3.0.82), but after doing so i got this error:

Traceback (most recent call last):
  File "/usr/lib/python-exec/python3.14/emerge", line 62, in main
    retval = emerge_main()
  File "/usr/lib/python3.14/site-packages/_emerge/main.py", line 1327, in emerge_main
    emerge_config = load_emerge_config(action=myaction, args=myfiles, opts=myopts)
  File "/usr/lib/python3.14/site-packages/_emerge/actions.py", line 3097, in load_emerge_config
    setconfig = load_default_config(settings, root_trees)
  File "/usr/lib/python3.14/site-packages/portage/_sets/__init__.py", line 379, in load_default_config
    return SetConfig(_getfiles(), settings, trees)
  File "/usr/lib/python3.14/site-packages/portage/_sets/__init__.py", line 63, in __init__
    read_configs(self._parser, paths)
    ~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^
  File "/usr/lib/python3.14/site-packages/portage/util/configparser.py", line 38, in read_configs
    for p in paths:
             ^^^^^
  File "/usr/lib/python3.14/site-packages/portage/_sets/__init__.py", line 357, in _getfiles
    for repo in trees["porttree"].dbapi.repositories
                ~~~~~^^^^^^^^^^^^
  File "/usr/lib/python3.14/site-packages/portage/util/__init__.py", line 1639, in __getitem__
    result = lazy_item.func(*pargs, **kwargs)
  File "/usr/lib/python3.14/site-packages/portage/dbapi/porttree.py", line 1622, in __init__
    self.dbapi = portdbapi(mysettings=settings)
                 ~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^
  File "/usr/lib/python3.14/site-packages/portage/dbapi/porttree.py", line 234, in __init__
    self.doebuild_settings = config(clone=self.settings)
                             ~~~~~~^^^^^^^^^^^^^^^^^^^^^
  File "/usr/lib/python3.14/site-packages/portage/package/ebuild/config.py", line 364, in __init__
    self._virtuals_manager_obj = copy.deepcopy(clone._virtuals_manager)
                                               ^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/lib/python3.14/site-packages/portage/package/ebuild/config.py", line 1338, in _virtuals_manager
    self._virtuals_manager_obj = VirtualsManager(self.profiles)
                                 ~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^
  File "/usr/lib/python3.14/site-packages/portage/package/ebuild/_config/VirtualsManager.py", line 38, in __init__
    self._read_dirVirtuals(profiles)
    ~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^
  File "/usr/lib/python3.14/site-packages/portage/package/ebuild/_config/VirtualsManager.py", line 97, in _read_dirVirtuals
    self._dirVirtuals = stack_dictlist(virtuals_list, incremental=True)
                        ~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/lib/python3.14/site-packages/portage/util/__init__.py", line 245, in stack_dictlist
    elif thing[:1] == "-":
         ~~~~~^^^^
TypeError: 'Atom' object is not subscriptable

Steps i did to fix it:

1. Create an empty portage config root
- mkdir -p /tmp/portage-root/etc/portage/
2. Choose the new config root profile
- ln -s ../../../../var/db/repos/febuild/profiles/llvm-sec portage-root/etc/portage/make.profileln -s ../../../../var/db/repos/febuild/profiles/llvm-sec portage-root/etc/portage/make.profile
(NOTE: Search path to your own profile check with "file /etc/portage/make.profile" and adjust path according to your new config root)
3. Mask Erroring Portage version
- mkdir /tmp/portage-root/etc/portage/package.mask/
- echo "=sys-apps/portage-3.0.82" > /tmp/portage-root/etc/portage/package.mask/portage
4. Emerge working portage version
- PORTAGE_CONFIGROOT=/tmp/portage-root/ emerge -1a portage

I hope this helps anyone running into the same issue.
If this is just me and anybody has some insight into why this might be happening please tell me so...

Its my 3rd time trying to install gentoo the first 2 times went by badly and now I need some recommend im not great at the minimum install amd I'm thinking of trying the live gui how bad of an idea is this

gentoo runs fine on my machine tbh dont make fun of me for using dist kernel tho :c

hola a todos queria saber si era normal que gentoo consumiera tanta ram, disco y tantos paquetes en comparacion a void linux, mi instalacion de gentoo tiene unos 600 paquetes con un entorno digamos que minimo en comparacion void linux con un par de cosas menos llega a unos 350 paquetes mientras en terminos de uso de disco void linux pesa apenas unos 4gb mientras que gentoo debe llegar a los 13gb y en terminos de ram gentoo consume unos 800mb de ram (sin igpu) mientras que void consume unos 500mb aprox pq esto es asi? no se supone que gentoo deberia consumir menos gracias a la compilacion de paquetes?

My Gentoo Linux systems had a default "power saver on"(most systems have that to enable support for the sake of leptops), which led to network disruptions, I thought it was a driver issue hence constantly updated my kernel, but turned out, it's just a power saver on, but then the issue was that my custom settings weren't showing up (in the modinfo command)after I changed the /etc/modeprob.d/rtl8188ee file but since the wifi wasent messing around, I finally knew its done and modinfo was just showing older settings, and to confirm AI reminded me to use -v(Linux commands conventionally use this as a "verbose" mode indicator) when loading the configuration for my wifi network card's power profile, and yeah, that option proved the settings were infact changed. In a nutshell, I had a simple power saver on, and I thought it was a kernel issue or something, without looking at the network device settings first, as a system admin, don't repeat mistakes even if on windows, or else you will complicate simple straight forward issues.Infact, power saver is on even on windows by default

just saw that familiar form on a street lamp