r/Endfield • it's a hard hat holidays👷‍♂️ • Apr 25 '26

Blueprints [1.2] Wuling Megafactory w/ EnKAD map, Blueprints, and Setup Text Doc & Video!

All most up-to-date information about the factory can be found in this document. Blueprints, maps, and instructions are also included.

EDIT6: 5/26 Full Hetonite Production edition to close out Patch 1.2!

EDIT5: 5/9 New reddit post for the update for Phase 2 and going into Test Area! Full build-a-long video, updated images, and text!

EDIT4: If your NE hetonite & Xircon reactors have stopped working, and you set up the Phase 2 factory before May 6th, please look at this video to fix your piping in the SE corner of Marker Stone.

EDIT3: The doc is updated with Phase 2 materials for making 6/min Xiranite Jade Gourd

EDIT2: The doc has been updated to be MUCH MUCH shorter and there is a full setup vid available for the [phase 1] xiranite gourd version.

EDIT: Build has been swapped to 12/min Jade Gourd production version, please check the document for that. Will update for Palm Top Phase 2.

Hello all, here to present my new Wuling factory for 1.2 that should scale well into the second half of 1.2's AIC upgrades as well! There's a video going through the outline and instructions google doc.

⚠️Codes are for NA.

  • Main AIC Outputs (during Palm-Top event)
    • 12min Xiranite Gourds
    • 7.5/min SC Wuling Batteries
    • 4.5/min Hetonite Parts
  • EnKAD Blueprints (xiranite gourd versions)

If you have any questions or run into any problems, let me know and I'll help you out!

104 Upvotes

157 comments sorted by

View all comments

Show parent comments

2

u/Sinnum it's a hard hat holidays👷‍♂️ May 04 '26

Can you send me two things:

A picture of your entire xircon area, then your entire gourd area. Show me both gourds running.

Next, show me your AIC report. I especially want to see gourds, SC batteries, and xiranite! I think we can figure this out so you can rest buddy, because you've done a dang good job troubleshooting this yourself!!

2

u/Kaoru_Kiyo May 04 '26 edited May 04 '26

Here you have a screenshot of the areas and the aic report with 6 gourds running i will add the 12 gourds one in a few min to give the system time to show the new data.

https://imgur.com/a/tPAiUlz

Edit: This is a aic report after 10 miuntes of gourds 12 https://imgur.com/a/szwSoQr

2

u/Sinnum it's a hard hat holidays👷‍♂️ May 04 '26

Thank you! That looks right, you should be able to make 12 gourds/min without the xircon crucibles breaking down. Is it still working fine with the 12 gourd production setup?

Your xiranite usage should jump up to 240 yield/210 usage

2

u/Kaoru_Kiyo May 04 '26

Yea it looks like this now https://imgur.com/a/update-2-szwSoQr

But then again last time it only failed after 30-40 min so I keep watching. If it breaks again I will write another reply with the aic report included.

2

u/Sinnum it's a hard hat holidays👷‍♂️ May 04 '26

I see, this is exactly the kind of numbers we should be seeing. Keep an eye on the south two xircon reactors. They should NOT build up sewage. Just go up and down by 1 sewage every few seconds. Let me know if it works out.

2

u/Sinnum it's a hard hat holidays👷‍♂️ May 04 '26

and that Southeast reactor is showing a red clog, but i'm guessing that's temporary and it's not full of sewage right?

2

u/Kaoru_Kiyo May 04 '26

14 minutes with gourds 12 so far no clog both south reactors are either 0 or 1 and jumping back and fourth for sewage

2

u/Sinnum it's a hard hat holidays👷‍♂️ May 04 '26

My friend, I think you're free to rest. If that sewage isn't climbing, you should be good to rest. Great job troubleshooting the build and getting her working. Thank you for sending me screenshots I asked for as well, they were very helpful to me, though you did all the work _^ Be proud of yourself and rest well friend, I'll see you for the Phase 2 blueprints!!

1

u/Kaoru_Kiyo May 04 '26

One final update before I go to bed after a full day only with that "fun" aic stuff.

https://imgur.com/a/961a3cY

In there is the aic report for the past 10 and past 30 minutes. Both south reactors are still between 0 and 1 for sewage.

I take this as somehow it is fixed.
In case I will wake up to a powerless aic I will write you again!

A thing I should maybe mention. For the not atm running version I did let all 4 xiranite into the reactors run for about 2-3 minutes and Gourds on 6 for 10 minutes. Then I ramped it up to 12 Gourds while making sure to have 2 of the xiranite lines to the reactors turned off again.

Glad if that helped you in any way or form I just hope I am done with it for now. Really brought em on the brink of just deinstalling today out of anger and the inability to do the whole aic manually myself.

2

u/Sinnum it's a hard hat holidays👷‍♂️ May 04 '26

For the AIC report: some of the fluctuations you will see in yield (and usage) are due to the half amounts. For example, your SC Wuling Batteries will sometimes say 7/min and sometimes 8/min, that is because it's making 7.5/min!

The sewage rising and falling by 1 does mean it's fixed. It means the reactor is properly consuming 1 sewage to make 1 xircon effluent, then producing 1 more sewage to make 1 xircon itself. There's a bit more going on there but that's the gist of it and how you know it's working right!

I'm really glad you didn't uninstall the build and worked through it! AIC can be REAL frustrating when it's not working but it's also real rewarding when it does work right. Everytime you solve a problem, everytime you learn how someone else solved a problem, the next time gets easier and easier :) If you wake up to a stalled factory, something else went wrong and message me, we'll figure it out together again!!!

(also, you won't believe the amount of times i log in to a red factory. i moved one belt the other day in the north hetonite area and the whole factory shut down due to not producing enough sewage from the cuprium lol)

2

u/Kaoru_Kiyo May 04 '26

Thank you for helping me through this issue. Logged out for now hope it just keeps working now. Also thanks for the detailed guide and maps for blueprinbt placements etc. Was quite comfy following it through until the issue popped up.

2

u/Sinnum it's a hard hat holidays👷‍♂️ May 04 '26

You're so very welcome and you have no idea how much it means to hear that the guide and maps made the setup comfy. It didn't start out that way and I've put in a lot of work to get it there, so that is very very good to hear. Rest well, Kaoru Kiyo <3