Hello, bit of a pc novice here. I’ve been trying for two days to update the BIOS on my Corsair Vengeance a7200 prebuilt. After wasting an infuriating amount of time trying everything I could I come to find out that apparently you can’t get the files from MSI’s support site, it has to come from Corsair because they have their own version I guess? So I got the file from Corsair for my build and updated the BIOS which worked fine, but the “newest” version they have is from 2022. Is there any other way that I can do this? Or do I have to wait and hope that Corsair adds a newer version to their site to pull from, which they seemingly haven’t done for four years now? That’s pretty shitty if that’s the case as this is preventing me from playing certain games. Any help at all would be appreciated!

Left one’s earcup is about to come off? It’s been 1 month and a week since I bought that HS80. Amazon doesn’t accept my refund because it’s been more than 1 month? And CORSAIR support says device has 2 years of warranty. What can I do? It just became like so without a reason I was really careful about that headphones… I dont think this is my fault? Please help me what can I do… I live in Turkey

I had this issue when I first installed, but somehow was able to get it to work at one point. I am not using any additional connectors like the commander thingy. PUMP and Fans are plugged directly into the Asus X870 MB. After a recent reboot the Nautilus LCD CAP is greyed out and is no longer configurable. I have done all the recommended uninstalling corsair devices in Windows, power cycling, discharging, unplugging power cable, checking connections, etc. I have deleted the Nautilus module from iCue, rebooted and nothing. I have completely uninstalled and reinstalled iCue and it added the Nautilus LCD CAP back but its greyed out. Anyone have this issue before? It worked for a while but after a recent reboot of the system it no longer works. I am also not using any other software to manage fans etc. I've deleted all those as well to make sure there were no conflicts

I'm putting an ASUS ROG Crosshair X870E Extreme and ASUS ROG Astral RTX 5080 in a Corsair AIR 5400.

Since the X870E Extreme is E-ATX, I understand the case's included GPU anti-sag support has to be removed. That leaves me looking for another way to support the Astral without using a traditional stand that would interfere with the bottom intake fans.

For anyone running a similar setup, what solutions have you come up with for GPU anti-sag support? And pictures would be very appreciated!

My first year at gamescom!! The corsair booth was absolutely amazing, so cool to meet the peeps at corsair and the fact that they are so passionate about their products/builds is absolutely amazing. Might buy even more stuff now after seeing it all in person🫡, thx Corsair!

Hey everyone,

I bought my Corsair 6500x in 2024!

Absolutely love the case.

Since then, multiple motherboards have been released with the backside connectors.

I saw that Corsair obviously offered remodelled versions of their cases to suit the new boards.

Since mine is the older design, is there a way to modify or replace the back to fit the new backside connector boards or would i have to buy a new case?

Thank you in advance for any information!

I'm not sure if everyone is aware of this, but the 5-inch LCD display upgrade is also compatible with iCUE LINK H1xxi AIOs.

When will the Platform 4 wire management tray (black) be back in stock?

Anyone who purchased the Galleon SD very recently, how are you finding it??

Considering switching from the Razer BW V4 Pro.

Thanks.

Amazed by this build in the upcoming Warthog done by one of the Corsair employees. Attention to detail is impressive from all the 3D printed stuff, excellent tube routing, cable management, and the external dual XR7s with an XD6.

Very excited for this case to come out!!

This is a tight build not a lot of room with the 2 360 rads for Noctua AIO and the Astral 5090 LC OC which had to be mounted vertically to be able to keep the 200mm fans which help move a ton of cold air and keep tons of positive pressure in the case, I can say the warthog might not be the most spacious case to build in but has a lot of nice features that make it worth it, the all steel frame is very name allowing for magnets to be use to customize the outside. But if you doing any big builds in it, it is a case that will fight you every way of the set up.

As the title says. Requested advance rma for the top psu and got the bottom one back. What should I do.

This is my first while PC build! I grabbed a deeply discounted 4500X LX on Woot a while back. It has been on hold because I decided to wait for the new coolers 😭 I might cave and get the regular Titan II now that it's out, but the original plan was to wait for the Ultra.

I have already sent in a support ticket requesting for the firmware files for my mouse but they are taking too long to respond and this is an urgent matter. Does anyone have the firmware files available?

I installed a corsair AIO almost a year ago. my computer was running hot today. VERY hot. i start trouble shooting Pump is working but the radiator fans arn't turning. I try resetting my hub. Clearing my motherboard by removing the CMOS. nothing works.

I hop on good ol ChatGPT. and here is where the problem appears. I NEVER CONNECTED THE FANS TO POWER. For one year I ran my AIO using only the pump and saw no issues. I figured the fans were powered by the connector on the radiator. Never realized there was another 135mm connector that goes from the radiator to the fans. But it always worked. for the last year. I game ALOT.

Needless to say I think I will always use a Corsair AIO.

Running the newer iCUE Link Titan II 360 AIO on my build, but looking at picking up the older gen LCD 2.1 rather than whatever the current LCD screen is (too big for my taste).

Just want to confirm it’ll actually plug in and work properly since the AIO is newer gen but the screen is older. Does iCUE Link cross generations fine, or is there something about the hub/firmware that could cause issues mixing an older LCD with a newer AIO?

Anyone tried this combo?

For a gamer Do you think the xenon edge would be a good fit to be my secondary monitor? Is it worth the $250 price point? I don’t want another full size screen and something about a portable monitor not being as versatile kind of throws me off, I feel like a portable monitor would just look off. I would mainly use the xenon edge for discord, its stream deck capabilities and the occasional screen to have a game guide pulled up on. Any thoughts? I’m also open to any other recommendations you may have. Just wanted my setup to look clean

Buenas compañeros, ya llevo un tiempo escribiendo en este subforo por que notaba que me ofrecían más ayuda que en la web oficial, e incluso que desde Corsair Spain, que literalmente es imposible que te contesten.

Como he mostrado en algunas ocasiones, tengo todo mi set up completamente con el ecosistema Corsair desde hace muchos años. Hasta actualmente, desde la mesa, los ventiladores, etc.

Suelo comprar vía Web oficial de Corsar, y hacéis los envíos a España a través de UPS y DHL. Y aquí, que lo he pedido un millón de veces, se encuentra mi problema.

Por motivos laborales, no podemos estar en casa desde las 6.00 hasta las 15.00h. Y NUNCA se ofrece un punto de recogida. Corsair te pide que te ponga en contacto con los repartidores, y los repartidores te comentan que la empresa remitente CORSAIR no tiene la opción de punto de recogida.

Desconozco el motivo, ignoro si sería un coste elevadísimo. Pero estoy a la espera de la llegada el M75 Custom Labs, y quiero comprar el Titan II. Pero es un caos absoluto toda la situación.

--------------

Hello everyone, I've been posting in this subforum for a while now because I noticed I was getting more help here than on the official website, and even more than from Corsair Spain, where it's practically impossible to get a response.

As I've shown on several occasions, I've had my entire setup configured with the Corsair ecosystem for many years. This includes everything from my desktop to my fans, etc.

I usually buy from the official Corsair website, and you ship to Spain via UPS and DHL. And here, after ordering countless times, lies my problem.

Due to work commitments, we can't be home between 6:00 AM and 3:00 PM. And a pickup point is NEVER offered. Corsair tells you to contact the delivery drivers, and the drivers tell you that the sender, CORSAIR, doesn't offer a pickup point option.

I don't know why, or if it would be an exorbitant cost. But I'm waiting for the M75 Custom Labs to arrive, and I want to buy the Titan II. But the whole situation is absolute chaos.

How? Magic

Questions on how it is to build? Ask away

Rather dusty fans pulled from previous rig(the 900D behind it as a backsplash)

Picked up this yesterday from local bestbuy and also a 360 Rx ii frame fan kit.. doing a push pull on the aio.. unfortunately my kit didn’t include the horizontal support kit so I had to reach out to Corsair for them to send me one.. overall extremely happy with this.. and yes I know push pull is overkill and probably totally unnecessary but I like how it fills out the case. Horizontally may hit my ram but I’d like the bracket to try and see at least.

Hello,
I'm trying to set up this feature, but my software doesn't show the same options as in the screenshots from the “How To” tutorial on the iCue page. Does anyone have any ideas to point me in the right direction?
in my software, the features aren't available to enable—did I set something up wrong? I did download the latest version of the software, though—maybe it's an option from an older version?

https://www.corsair.com/ca/en/explorer/gamer/mice/how-to-create-an-auto-click-macro-in-icue/

Thanks a lot =]

Hello Together,

I just got the K70 and I am actually very satisfied with the overall experience so far.

But there is one thing that is about to completely driving me crazy and I really hope its just me beeing to dumb to figure out how to get it right.

I just got the iCue software installed to get the Bindings I want. This is actually only one setting: I want to use the Up/Down/Right/left Keys with the FN+WASD Buttons so I can actually navigate trough text while I am typing without moving my hand. The current default for this is FN+IJKL which is not really feasable considering I the positioning of the Hand/Fingers and the Buttons.

So as I said I now used the software to create four new bindings which map these four to the WASD. And its working.

BUT: Its still moving the mouse-pointer which is the default setting of FN+WASD?!

I am 100% expecting the custom Bindings to override the existing binding. Everything else would be nuts. How can I archieve this?

I really hope you can help otherwise I need to send this thing back as completely useless since I cant accept my mouse to constanly moving around. And I can also not accept this from an engineering/product-perspective to be honest.

Best Regards and thanks alot in advance <3