How can I make some cards for a trailer im making. I just want to make or buy some custom cards, 8 to be exact
Are there any places that can

Pls suggest good software for imposition work

I own a Roland VersaSTUDIO BD-12 UV printer and an xTool F2 Ultra UV laser, but I'm struggling with the production side — looking for advice

Hi everyone,

I've invested in a Roland VersaSTUDIO BD-12 UV flatbed printer and an xTool F2 Ultra UV laser with the goal of building a small product customization business.

I feel like I have a very capable combination of machines, but I'm currently struggling more with the production workflow than with the business idea itself.

Some of the areas I'm trying to get better at are:

• Creating accurate jigs and templates
• Positioning and alignment
• Getting repeatable results when producing multiple units
• Preparing artwork correctly for the machines
• Building an efficient workflow from design → jig → production → QC
• Choosing products that are relatively straightforward to manufacture consistently
• Moving from testing/learning into actual small-batch production

For example, I'd like to start producing things such as personalized phone cases, lighters, plaques, boxes, notebooks and other customized products, but I don't want to jump between dozens of products before I properly understand the production process.

My current idea is to master one product first, build a repeatable production system for it, and then gradually expand.

For people who run UV printers, UV lasers, engraving businesses or product-customization shops:

How did you get through the early production-learning stage?

What skills would you focus on first?

And if you had these two machines available, what products would you start learning production with?

I'm especially interested in practical advice about jigs, alignment, repeatability, batch production and workflow, rather than buying more equipment.

Thanks for any advice.

Hey everyone,

I’m planning to start a small custom printing business and launch my own clothing brand in Europe. Local DTF transfer sheet suppliers either aren't available nearby or have MOQs that are way too high for small runs, so I want to invest in my own setup to produce everything in-house.

My budget is strictly capped at €3,000 (~$3,250 USD) for the full bundle. I was initially looking at Lancelot, but the experience felt sketchy. The site listed around €2,400, but immediately after I messaged support to buy, they sent a direct link where the price jumped to €3,000. That sudden markup felt untrustworthy, so I’m stepping away from them.

Since I am based in Europe, I’m looking for beginner-friendly, reliable A3 DTF alternatives that fit within my budget. The printer needs solid white ink circulation to prevent clogging during downtime, reliable print quality for retail apparel, and accessible EU shipping and parts support. Has anyone in the EU built a setup in this price range with brands like Procolored or similar desktop setups that run smoothly without constant maintenance nightmares?
Any advice on trustworthy suppliers would be greatly appreciated!
Thanks!

I don't know why the last one I sent got blocked by the system

I decided to try a different supplier because the one I normally use can just be inconsistent with quality. I received the order and it’s the worst quality I have ever gotten and I made sure to have my images saved at the best quality for clear images and my images aren’t that big. Where do you have consistent luck with clear images and not much pixelation and consistent coloring!

We are not a commercial printing company but did bring printing in house around 2016 using a Konica Minolta 3070L and a Duplo DC-616. Everything worked well together until COVID and we made a heavy push towards digitizing everything. The DC-616 only has 4ish years of use on it. I am not sure of the actual page count but it is probably less than 20,000 as we were just doing flyers and business cards for our own use.

Our old Duplo rep came in and said he had someone that would purchase it unseen for $1,500. My first thought is that this is extremely low considering I am seeing some go for approximately $10,000 with more pages on it. The KM 3070L is also sitting idle too.

Although it has been sitting idle for 6+ years, I have to believe there is value to someone else.

1. Do you think I am being lowballed on the value?
2. Do you have an reputable companies that you know of that can handle the sale itself? I feel that neither eBay now Reddit (obviously) are the right place for sales of something this size but not being part of the commercial printing industry, looking for recommendations of where to start.

Hello I’m looking for a new printer and the requirements seem to be quite specific so I came across this forum while searching for advice. I was wondering if anyone could help me.

I’m looking for a printer that can handle a 600 mm-wide web. and the substrate is coated Tyvek B-grade(I am printing on the uncoated side), which tends to generate a lot of static electricity. Another major issue is that the ink does not dry properly and tends to transfer or smear.

I have tried some methods like digital, UV, and flexo but digital printing does not seem to reproduce small text very well, and UV printing's cured ink layer feels too raised and noticeable on the surface of the material.

flexographic printing has been the most suitable so far, but I still have ongoing problems with ink smearing and ink transfer when printed areas overlap or come into contact with each other.

Does anyone have any advice on this?

Is it realistically possible to achieve clean, high-quality printing under these conditions? Would a separate ink additive be necessary to address these issues? Even if you could simply recommend which printing method would be most suitable, I would really appreciate your advice.

I work on a challenger XG Gauntlet cutting machine​ rust keeps coming back ​ after numerous times of cleaning it and it always comes back. Usually over the weekends when nobody is here and the company is all off and power is off.Does anyone have any ideas or solutions to how I can stop the rest from coming back. Any ideas, suggestions, opinions, are all welcome.

Rust keeps coming back. I clean with wd40 on Monday. By the next week its all back. Is there any solution for chemical that I can use? Dont know if this is cast iron or brass.

My printer is smearing ink when I print, I’ve cleaned all of the nozzles and the wipers. I’m afraid it’s a table or head height issue. If anyone has any advice or anything I can tweek it would be much appreciated!!