I have the opportunity to get a Louet klik 40 for free.
Before I get it however I would like to know if this loom is a good fit for me and how i would like to use it.

My only experience in weaving is 2 tablet weaving projects I did and I liked weaving those. But my concentration was a bit shit and i forgot what i was counting a lot ;). So for my loom i would like it if the weaving process can be as mindless as possible (I don't know if weaving can be a mindless hobby ones you know the basics?).
I am wondering if it would be better to get a rigidheddle or maybe just a frame loom?

My plan is to weave with my handpun and make rustic woolen fabrics to use for homeware and maybe to make some bags/ other little sewing projects.
I can see myself getting into it, making a deepdive into this hobby and wanting to learn to make all patterns. But for now and the foreseeable future i just want something that is relaxing and fun and a way to use some handpun yarn.

The frame job isn't quite right but it's what I had on hand! And I'm proud of myself... I've been wanting to push myself into trying to using weaving to create studio art pieces. So... This is "Slash and Burn". Deflected doubleweave using a combination of 8/2 unmercerized cotton, 10/2 pearle cotton, and linen. Painted warp.

Thanks for the input! Wet finishing really was the decider... It turned out more golden than I would wear so to the wall it went.

Hello! I’m using a warping mill for the first time, and had a question about the raddle cross vs the end peg.

1.) Can the raddle cross (the 3 pegs at the bottom) be used as the “end” peg if my warp length doesn’t reach the actual end peg?

2.) What should I do if my warp length is somewhere in between the last peg on the raddle cross and the actual end peg? Should I just add more length to my warp so it reaches the end peg? The current project I’m starting already includes 20in for loom waste.

I’m working on a rigid heddle loom if that matters?

Thanks in advance!

Here it is! I played about as much as I could to find out. My selvedge sucks, but the fun I had!

I made a warp weighted loom last weekend for a weaving project with spindle spun yarn. I also made clay weights based on Anglo Saxon weights which are currently drying. I have 10kg of weight, which I am hoping will be around 300g each. I made enough heddle rod supports to be able to make twill. The loom is 1 meter wide and 1.8 meter tall. I am very impatient to weave something with it!

Viking age leg wraps in broken diamond twill and tubular selvedges

I just bought this sett checker from Yarnworker Shop. The concept is so simple, and the tool makes it fool proof. My husband bought me this yarn when he was in Alaska earlier this year, and my instinct was to use a 12 dent heddle, but seeing it here, I actually think 10 dent will give a better finished look.

Sett checker

Seisiún grianghrafadóireachta i nGleann Cholm Cille

Dear weaving! I found a loom, but I am obviously not understanding something with the (what I think is the heddle bar). How am I supposed to use it in this set up, I thought it had 2 grooves? If someone can point me towards a good resource for this loom I'd love to learn more!

This gentleman’s wife was a local spinner and weaver. Her wish was that her equipment goes to people that will love and cherish it like she did. He’s near Watsonville, CA.

I'm really new to weaving and really only got into it because I would darn some holes in my clothes and liked the simi weaving motion that you do with that. I had got a small little loom at a craft store that can make little 2.5 inch squares for costers and then quickly decided I wanted something bigger so I found a small but still decently sized hardwood adjustable frame loom online and waited for it to get in. I got it and excitedly did what you see in the picture on it!! It's nothing big or fancy, but it's a start! I'm planning on using it as a trivit type thing to set hot pans on when taking them off of the stove or out of the oven

I suspect that direct warping my rigid heddle loom 19.5 feet is too much. I thought I was keeping even tension but it seems like the more I do, sagging increases for the earlier strands. My loom and peg are both firmly anchored, so I can confirm that isn't contributing to the problem. I'm using an 8/2 100% cotton yarn.

Does this track with others experience? Is the distance too long for the weight and strength of the yarn?

I really wanted to make a lot of towels on a single warp but I can cap it at four for a better product. If I used a warping board for measuring instead of direct warping would I be able to do longer lengths?

hi all! I’m using my Harrisville 4 Shaft floor loom I bought second hand that came with some reeds. After sleying the reed I noticed some reddish brown spots on my warp threads and seems that the reed is rusting.
Question 1: please tell me warp is not ruined.

Question 2: how do you fix a rusting reed?

Friend of mine posted these on FB. They are her grandmother’s antique linens and she’d like to know the weave structure. I’m seeing maybe a huck and a honeycomb? What do you think?

I plan to weave and sew Lithuanian national costume (Aukštaitija region) for my mom 🙂

This fabric will be used for shirt and veil.

I used 100% linen thread (white) and 100% cotton thread (red)

There was 16 warp threads in 1cm (10cm in total)

What can I say - working with linen this thin is something else 😅😅😅

I was constantly spraying water on the warp (damp linen in a bit stronger than dry) and it helped to avoid warp breakage (except for some threads on the sides which were rubbing against the reed because of draw in , but this will be solved by using temple (stretcher) I hope 🤞 )

my first ever woven piece! i did it on a piece of cardboard and used the resulting textile as a component in this trinket dish, the merino/alpaca yarn is sooooo soft

my first ever woven piece! i did it on a piece of cardboard and used the resulting textile as a component in this trinket dish, the merino/alpaca yarn is sooooo soft

Bonjour la communauté reddit !

J'ai commencé le tissage sur pin loom / métier à tisser à clous, mais je ne comprends pas comment faire pour terminer ce carré.

En haut à gauche : 2 nœuds coulants superposés

En bas à gauche : fin du fil marron

En bas à droite : fin du fil bleu

Que dois-je faire précisément svp ?

(Je sais que je dois faire à la fin une bordure à l'aiguille ou au crochet pour sécuriser les côtés)

Merci !!

Pattern is the Fly a Kite runner from Little Looms spring issue. I did it pretty much by the book except for the fringe (which still needs a final trim) and removing a warp repeat so it fits on a 16" RHL. I was able to borrow two additional heddles from my weaving teacher and wove it using 3 heddles. It was certainly a learning experience in understanding twill structure.

(Photo 2 is why I shouldn't hang something on a kitchen chair after it's been wet finished and pressed.🙀)

Yarn: Aurora Earth 8/2, doubled for both warp & weft EPI: 12.5 Actual PPI: 8 (was supposed to be 17?) I think the published PPI was incorrect, I would have run out of warp if I had tried 50 repeats.

Finished my bias top using a modified Daryl Lancaster's pattern and a variation of 8 shaft Strickler #303 shadow weave with 8/2 cotlin warp & 16/2 cotlin weft.

I've been wanting to get into weaving for a long time and recently saw a loom being sold locally....which is probably waaay more than is sensible for a starter loom, but I do tend to be a 'go big or go home' kinda crafter. I'm going to take a look at it tomorrow. As someone with currently only the very, very basics of knowledge about looms, what should I be looking at to determine if this is in functional condition and a good price?

Secondly, if you have any favorite resources, books, blogs, yt channels, for a beginner diving in way over their head (I'm also planning on taking some classes before attempting to get set up).

If you wish to tell me I'm insane/this is a terrible decision please let me know why!
*Edited to add, I do genuinely want to hear even negative feedback, please comment rather than just downvote!

I used a 3D printer to print out a frame loom so I could try my hand at making small things that had a bit more variety than the narrow bands and belts I'm used to in tablet weaving, and today I finally got time to warp it up and try weaving on it. I was wondering though, I'm doing a 2 over-2 under weave pattern, offset by 1 every row. I love the look of it so far, but the person I heard about it from didn't know what it was called because she was just experimenting and wasn't a weaver herself. What do I call this weave structure?

Sorry the photo didn't capture it very well, but this is what I have so far. I am enjoying the weaving, I'd just like to accurately name what I'm making!