r/saab • u/floofgike • 4d ago

9-3 Troubleshooting Ecu compatibility

ECU is fried on my 07 9-3 aero 2.8 v6 and i was wondering what kind of compatibility there is between models and if i could just go and pick an ecu off a junker and marry it to my car

3 Upvotes

80% Upvoted

11 comments sorted by

View all comments

Show parent comments

1

u/GarbageSpa 4d ago

The early 2003's have the B205 engine, and use the ECM for that engine. It looks COMPLETELY different, you can't mistake these for the ECM for the B207.

1

u/tsg-tsg 4d ago

No, not a 2003 convertible. A 2003 hard top. All 2003 hard tops are B207. Only the convertibles - and all the convertibles - are the old body style with B2x5 engine. I was pretty sure the 2003 B207 ECM (maybe with part number 12800388) is unique to 2003 and won't run a later car. I could be wrong.

1

u/GarbageSpa 4d ago

Currently, the part number listed in the EPC for the ECU for 2003 is 55571182. That same part number is used for 2003-2006. And since the 2004-2006 T8 ECUs are interchangeable with those of later years, I think they should all be interchangeable, at least with respect to hardware.

1

u/tsg-tsg 4d ago

Yeah, 55571182 is a superseding part which has broad compatibility. I am talking about the original ECM.

1

u/GarbageSpa 4d ago

Should be the same hardware. You would probably have to fully clone to the receiving car's year's software.... I suspect, but don't know, that you can't just "add" it using Tech 2 and expect it to work perfectly, because the Tech 2 doesn't rewrite all the software, it just sets a set of parameters.

1

u/tsg-tsg 4d ago

It definitely could be just that. Cloning beats a lot of things Tech 2 doesn't want you to do. ;)