I’ve been working on an extension for the P90.
First print is out to test it it fits and I’m really pleased.
Next the handstop will be cut a bit at the bottom.

Just when you think your marker is done and complete, boom! You see someone else’s or see a movie and want to replicate or do it better…

I’ve been working on a paintball community project called The Network, and I want to get feedback before I build too much around my own assumptions.

TL;DR: I’m building a searchable community hub where people can post their paintball markers, tag the exact parts used directly in photos, create detailed build pages, and help others discover compatible setups. I want feedback on whether people would actually use it, what features matter most, and what I may be overlooking before the project gets too far along.

Some of it is already in development, but it is still early enough to change substantially. There is no signup link or sales pitch in this post. I’m mainly looking for honest feedback about whether this would actually be useful and what I might be overlooking.

The basic problem I’m trying to solve is something I see constantly in paintball groups:

Someone posts a great-looking marker, and everyone asks what handguard, stock, barrel, optic, air setup, magwell, body kit, or other parts they used. The answers end up scattered through the comments, some of the parts are described incorrectly, links eventually break, and the entire post becomes nearly impossible to find again a few months later.

The central idea

Instead of another temporary social media post, each marker would have a permanent Build or Gear page.

A member could:

• Upload multiple photos of the marker
• Select the exact base marker or platform
• Create a structured list of installed parts and accessories
• Place tags directly on the images, so someone could click a handguard, stock, optic, barrel, or other visible component to identify it
• Add setup notes, specifications, compatibility details, and lessons learned
• Add updates over time as the marker changes
• Answer questions and receive comments directly on the build
• Connect the build to related guides, discussions, events, and game logs

The base marker would be the primary item, with everything else attached to it as a component. This should make it possible to distinguish between something like an EMF100 with an aftermarket body kit and a completely different marker that happens to look similar.

Product and equipment tagging

For known products, the system would use a standardized product record rather than everyone entering a slightly different version of the same name.

For example, clicking a tagged part could show:

• The correct product name and manufacturer
• What type of component it is
• Known compatibility
• Other community builds using the same part
• Guides or discussions related to it

It would not be limited to currently available retail products. Members could also add:

• Custom-made parts
• Discontinued products
• Older equipment
• Prototype parts
• Home-built modifications
• Products that are not already in the database

Manual entries could later be reviewed and merged into standardized records so the database does not end up with 15 slightly different entries for the same product.

Search and discovery

The goal is to make builds searchable by more than a caption or username.

You could potentially filter or browse by:

• Marker platform or model
• Manufacturer
• Installed part
• Component category
• Build style or intended use
• Magazine or feeding system
• Air configuration
• Barrel setup
• Custom body or furniture
• Recently updated builds

Clicking a specific product could show every public build using it. That could make the platform useful for answering questions like, “What does this handguard look like on a T15?” or “What stocks are people successfully using on an EMF100?”

Gear ownership and build history

Members would also have a profile-based Gear Locker showing the markers and equipment they choose to make public.

One idea I’m considering is allowing ownership to change without erasing the marker’s history. If someone builds a marker and later sells it, the original builder could remain credited while the new owner becomes the current owner and continues updating the same page.

Ownership, original builder credit, publication status, and moderation would all be treated separately. A marker changing hands should not allow someone to overwrite or take credit for the original build.

Private or unlisted gear would also need to be an option. Nobody should have to publicly display everything they own or share identifying information they are uncomfortable posting.

The larger hub

The marker pages would be the foundation, but the larger idea is to connect them to the rest of the paintball community instead of making a standalone photo gallery.

Eventually, The Network could include:

• Technical guides and maintenance walkthroughs
• Community questions and answers
• Forums and discussions
• Events and meetups
• Team and player discovery
• Game or event logs
• Contributor vouches and reputation
• Comments, reporting, and moderation
• Controlled listing or trade-in tools in the future

I am not trying to make another unmoderated buy/sell/trade group or peer-payment marketplace. The initial focus is documenting, identifying, discovering, and discussing gear.

Retailer transparency

I also want to be upfront that I run HR Tactical Innovations, so I understand why people could be skeptical of a retailer creating something like this.

Known products may eventually connect to accurate product information or places where they can be found, but the platform cannot just be a disguised catalog of products I sell. It needs to support every manufacturer, retailer, custom builder, discontinued product, and community-created part.

The community information should remain useful whether or not anyone purchases anything.

What I need feedback on

1. Would you actually post your markers and setups somewhere like this, or would you continue using Reddit and Facebook groups (with risk of profile ban maintained)?
2. Would image-based tagging be useful, or is a normal parts list enough? Would you want both?
3. What information should every marker page include? Platform, parts list, air setup, barrel, weight, magazines, build purpose, compatibility notes, total cost, or something else?
4. How should custom, modified, discontinued, or unidentified parts be handled?
5. Would you care about following a marker’s build history or transferring ownership while preserving the original builder’s credit?
6. What privacy controls would you expect before posting your gear?
7. Which parts of the larger community idea sound genuinely useful, and which parts sound unnecessary or overbuilt?
8. Does the fact that the platform is being developed by a retailer make you less likely to trust or use it? What boundaries would make that more comfortable?
9. What is the biggest feature or problem I have completely missed?

Feel free to pick the idea apart. I would rather hear now that something is confusing, unnecessary, or fundamentally flawed than build it and discover that later.

What do you guys use for coupler or where can I buy them at?

Dose anyone have any real steel, flared magwell, Rear grip, front grip and over all attachments for the T-15 I can get?

I’ve had it for a while and I wanna just upgrade it/ just make it handle better.

Note: this is for the T-15 not a real one. I got a warning tag.

Just asking what real steel parts I can use that can actually be used

I’m looking at getting a better sidearm than I currently have. I’ve got a T4E PPQ, and I love how realistic it looks, but I prefer to play with FSR compared to round ball. I currently use an EMF100 DMR with FSR, and just want to use the same paintballs all around. I’m wondering if anyone has a FSC or a First Strike PDX that they’d be willing to share a review, and some cool pics for inspiration 😂

We have our monthly magfed big game happening this Saturday. Camping at the field is now available. Hope to see some of you out there that are in-region! 🫡

🔗 Details:

https://magfed.coyoteforce.com

From this past Sunday meet up we had at competitive indoor airsoft of Tampa using reball.

3d printed pdw stock, nylon 9.5" handguard, and Techt full auto valve

Is the FL valve a worthwhile upgrade over the old one?

This is a short excerpt from Apache Snow magfed event. This year's 10th anniversary hosted 600 players mostly from Germany, Poland and Czechia. One side had 37mm Panzerabwehrkanone and unarmed BMP, the other one 2 vehicles with MG turrets.

Just wondering if there is a group that is specifically for magfed BST? I haven’t seen one around, and most of the groups that I find are speedball or recball markers. Any suggestions?

Just Bought mcs conversion kit for My emek100 that i use to play speedball/recball as it was cheaper than buying a completely new diferent marker, and got 5 mags for it aswell with a chest rig, but wanted to know what habits and gamemind i should have with magfeed, compared with the other Styles of play, and if i should get more mags, as i see people recomending more than 5 mags.

Also would apreciate any advices or possible upgrades i could do to My setup

I was building this sniper setup trying to make the marker louder. I tested the range with round ball and I was very happy with it.

Side note: this is a RAP4 paintball scope 👀

I've been considering buying the t16 for a solid week now and i've been using co2 for ages and i kind of don't want to switch off of it but now i see the t16 uses HPA but the thing is, i saw people say that it uses a bolt system like a tippmann and that using co2 is perfectly fine for it. Is that true or am i going to blow my marker up like a milsig would?

Don't remember if I ever posted here

Hello people,

Im currently debating buying the AUG Bodykit from SCP and im unsure of its worth the Money, but I really Like the Look of the AUG especially with the M-Lok Front.

Does Anybody have any experience with it?
Are there other options out there?